Component: winbox
2,119 changelog entries across 311 version(s)
Releases by channel (stacked)
- added "Modbus" menu support;
- added "netmap" action to IPv6 NAT rules;
- added IPv6 support for "Network" parameter under "Routing/OSFP/Interface Templates" menu;
- added missing IPv6 mangle actions - "mark-routing", "sniff-tzsp", "sniff-pc", "snpt" and "dnpt";
- added option to upgrade LTE firmware;
- changed extension channel symbol to lower case for WifiWave2;
- do not allow to set "memory-lines" parameter out of bounds under "System/Logging/Action" menu;
- fixed "routing-mark" and "routing-table" selection in IPv4 and IPv6 firewall and route rules;
- fixed private SSH key import;
- made "0" the default value for GPS "init-channel" parameter;
- made SSID field collapsible for WifiWave2;
- moved "RPKI" tab from "Routing/BGP" to "Routing/RPKI" menu;
- moved "Tables" tab from "IP/Route" to "Routing" menu;
- moved all interface stats columns to the right;
- properly load all backups stored in Cloud;
- properly show "value" parameter for FWD type entries;
- renamed "Backlight" to "OK" under "LCD/Backlight" menu;
- renamed "Dst. Address" to "Route Dst." under "IP/Firewall/Mangle" menu;
- replaced "routing-table" with VRF in traceroute;
- show "External Antenna" parameter on all Chateau devices;
- updated WifiWave2 interface fields and tabs;
- added "dhcp" option to "multicast-helper" setting;
- added "fec-mode" parameter under "Interface/Ethernet" menu;
- added "interface-speed-100G" LED type to "System/LEDs" menu;
- added "name" and "file-name" parameter when importing and exporting certificates;
- added "sfp-shutdown-temperature" setting to SFP interfaces;
- added SSH settings under "IP/SSH" menu;
- added TFTP settings under "IP/TFTP/Settings" menu;
- allow setting MCS (24-31) to 4x4 Wireless interfaces;
- do not allow to add/remove W60G interfaces;
- do not allow to set empty "init-string" field under "System/GPS" menu;
- do not show "GPS antenna" selection for devices without selection support;
- fixed "Secondary Frequency" parameter setting under "CAPsMAN/Channel" menu;
- fixed DNS "cache-size" parameter setting;
- fixed health reporting on RB960, hEX, hEX S and hAP ac3 devices;
- fixed order of weekdays under "IP/Firewall" menu;
- fixed support for "Delegated-IPv6-Prefix" for PPP services;
- match "MAC Protocol-Num" predefined values under "Bridge/Filters" menu;
- minimal required version is v3.30;
- properly show "CRL Signature" field under "System/Certificate" menu;
- separated CCQ Tx and Rx values in their own unique columns;
- show "System/Health/Settings" only on boards that have configurable values;
- show "current-channel" column by default for CAP interfaces;
- show IPv6 address in separate field under "IP/Cloud" menu;
- added "fec-mode" parameter under "Interface/Ethernet" menu;
- minimal required version is v3.30;
- added "dhcp" option to "multicast-helper" setting;
- do not allow to add/remove W60G interfaces;
- separated CCQ Tx and Rx values in their own unique columns;
- show "System/Health/Settings" only on boards that have configurable values;
- show "current-channel" column by default for CAP interfaces;
- added "name" and "file-name" parameter when importing and exporting certificates;
- allow setting MCS (24-31) to 4x4 Wireless interfaces;
- do not allow to set empty "init-string" field under "System/GPS" menu;
- do not show "GPS antenna" selection for devices without selection support;
- show "System/Health/Settings" only on boards that have configurable values;
- show "current-channel" column by default for CAP interfaces;
- added "Cloud Backup" options under "Files" menu;
- added "interworking-profile" parameter under "Wireless" menu;
- added support for PTP;
- do not show "Functionality" field for LTE interface if it is not provided;
- fixed "Switch" menu on RBwAPG;
- fixed "vid" parameter under "Bridge/Hosts" menu;
- show "System/Health" only on boards that have health monitoring;
- do not show "Functionality" field for LTE interface if it is not provided;
- do not show "GPS antenna" selection for devices without selection support;
- fixed "Secondary Frequency" parameter setting under "CAPsMAN/Channel" menu;
- fixed "Switch" menu on RBwAPG;
- fixed DNS "cache-size" parameter setting;
- fixed order of weekdays under "IP/Firewall" menu;
- match "MAC Protocol-Num" predefined values under "Bridge/Filters" menu;
- properly show "CRL Signature" field under "System/Certificate" menu;
- show "System/Health" only on boards that have health monitoring;
- show IPv6 address in separate field under "IP/Cloud" menu;
- added "Cloud Backup" options under "Files" menu;
- added "interworking-profile" parameter under "Wireless" menu;
- added "name" and "file-name" parameter when importing and exporting certificates;
- added "sfp-shutdown-temperature" setting to SFP interfaces;
- added SSH settings under "IP/SSH" menu;
- added TFTP settings under "IP/TFTP/Settings" menu;
- allow setting MCS (24-31) to 4x4 Wireless interfaces;
- do not allow to set empty "init-string" field under "System/GPS" menu;
- do not show "network-mode" parameter for LTE interfaces that do not support it;
- do not show empty "CPU Frequency" parameter under "System/Resources" menu;
- fixed "reachable-time" value unit under "IPv6/ND" menu;
- fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
- fixed health reporting on RB960, hEX and hEX S devices;
- hide "Allow Roaming" parameter on LTE modems that do not support it;
- increased "target" field limit to 128 under "Queues" menu;
- show "LCD" only on boards that have LCD;
- show "System/Health" only on boards that have health monitoring;
- show "activity" column by default under "IP/Kid Control/Devices" menu;
- fixed health reporting on RB960, hEX and hEX S devices;
- show "System/Health" only on boards that have health monitoring;
- fixed health reporting on RB960, hEX, hEX S and hAP ac3 devices;
- show "System/Health" only on boards that have health monitoring;
- added "Channel" parameter under "System/Console" menu;
- do not show empty "CPU Frequency" parameter under "System/Resources" menu;
- fixed "reachable-time" value unit under "IPv6/ND" menu;
- fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
- fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
- hide "Allow Roaming" parameter on LTE modems that do not support it;
- increased "target" field limit to 128 under "Queues" menu;
- renamed IP protocol 41 to "ipv6-encap";
- show "LCD" only on boards that have LCD;
- show "System/Health" only on boards that have health monitoring;
- show "activity" column by default under "IP/Kid Control/Devices" menu;
- hide "Allow Roaming" parameter on LTE modems that do not support it;
- added "Channel" parameter under "System/Console" menu;
- added "interface-speed-100G" LED type to "System/LEDs" menu;
- fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
- fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
- fixed "reachable-time" value unit under "IPv6/ND" menu;
- fixed support for "Delegated-IPv6-Prefix" for PPP services;
- increased "target" field limit to 128 under "Queues" menu;
- show "activity" column by default under "IP/Kid Control/Devices" menu;
- show "LCD" only on boards that have LCD;
- show "System/Health" only on boards that have health monitoring;
- fixed enable/disable button presence for "Bridge/Hosts" menu;
- renamed IP protocol 41 to "ipv6-encap";
- show "System/Health" only on boards that have health monitoring;
- use health values reported by gauges for "System/Health" menu;
- added support for wifiwave2;
- updated User Manager, OSPF and BGP menus;
- fixed enable/disable button presence for "Bridge/Hosts" menu;
- do not show empty "CPU Frequency" parameter under "System/Resources" menu;
- fixed enable/disable button presence for "Bridge/Hosts" menu;
- renamed IP protocol 41 to "ipv6-encap";
- provide sane default values for bridge "VLAN IDs" parameter;
- use health values reported by gauges for "System/Health" menu;
- added "src-mac-address" parameter under "IP/DHCP-Server/Leases" menu;
- added missing IGMP Snooping settings to "Bridge" menu;
- added missing MSTP settings to "Bridge" menu;
- added support for LTE Cell Monitor;
- allow adding bonding interface with one slave interface;
- allow performing "USB Power Reset" on "0" bus on RBM33G;
- do not show "network-mode" parameter for LTE interfaces that do not support it;
- fixed "IP->Kid Control->Devices" table automatic refreshing;
- fixed "interface" and "on-interface" parameter presence under "Bridge/Hosts" menu;
- fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu;
- fixed "tls-version" parameter setting under "IP/Services" menu;
- fixed minor typo in "Users" menu;
- added "src-mac-address" parameter under "IP/DHCP-Server/Leases" menu;
- added missing IGMP Snooping settings to "Bridge" menu;
- added missing MSTP settings to "Bridge" menu;
- added support for LTE Cell Monitor;
- added "operator" parameter under "Interface/LTE" menu;
- added "reformat-hold-button-max" parameter under "System/RouterBOARD/Settings" menu;
- added "tls-mode" parameter under "CAPsMAN/Security Cfg." menu;
- added "tx-rx-1024-max" counter under "Interface/Overall-Stats" for CRS3xx devices;
- do not allow MAC address changes on LTE interfaces;
- show "System/Health" only on boards that have health monitoring;
- show "System/RouterBOARD/Mode Button" on devices that have such feature;
- show "usb-bus" option on all boards that have it;
- show "usb-type" option on all boards that have it;
- sort IPv6 firewall "chain" parameter entries alphabetically;
- added "operator" parameter under "Interface/LTE" menu;
- added "reformat-hold-button-max" parameter under "System/RouterBOARD/Settings" menu;
- added "tls-mode" parameter under "CAPsMAN/Security Cfg." menu;
- added "tx-rx-1024-max" counter under "Interface/Overall-Stats" for CRS3xx devices;
- allow adding bonding interface with one slave interface;
- do not allow MAC address changes on LTE interfaces;
- do not show "network-mode" parameter for LTE interfaces that do not support it;
- fixed "interface" and "on-interface" parameter presence under "Bridge/Hosts" menu;
- provide sane default values for bridge "VLAN IDs" parameter;
- show "System/Health" only on boards that have health monitoring;
- show "System/RouterBOARD/Mode Button" on devices that have such feature;
- show "usb-bus" option on all boards that have it;
- show "usb-type" option on all boards that have it;
- sort IPv6 firewall "chain" parameter entries alphabetically;
- added "region" parameter for W60G interfaces;
- allow to specify any Ethernet like interface under "Tool/WoL" menu;
- do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
- fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
- fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
- fixed wireless sniffer parameter setting;
- hide irrelevant switch port parameters;
- fixed flag displaying under "IP/DNS/Static" table;
- fixed minor typo in "BGP/Peer" menu;
- hide irrelevant switch port parameters;