Component: winbox
1,156 changelog entries across 142 version(s)
Releases by channel (stacked)
- allow to specify SIM slot on LtAP mini;
- enabled "fast-forward" by default when adding new bridge;
- fixed neighbor discovery for IPv6 neighbors;
- show "System/Health" only on boards that have health monitoring;
- allow to specify SIM slot on LtAP mini;
- enabled "fast-forward" by default when adding new bridge;
- show "System/Health" only on boards that have health monitoring;
- show "W60G" wireless tab on wAP 60G AP;
- show "System/RouterBOARD/Mode Button" on devices that has such feature;
- added "allow-dual-stack-queue" setting to "IP/DHCP Server/Leases" menu;
- added "allow-dual-stack-queue" setting to "IPv6/DHCPv6 Server/Bindings" menu;
- fixed corrupt user database after specifying allowed address range (introduced in v6.43);
- make bridge port "untrusted" by default when creating new port;
- show "IP/Cloud" menu on CHR;
- show "System/RouterBOARD/Mode Button" on devices that have such feature;
- added bridge Fast Forward statistics counters;
- added "poe-fault" LED trigger;
- added "tag-stacking" option to "Bridge/Ports";
- allow to specify LTE interface when sending SMS;
- fixed arrow key handling within table filter fields;
- fixed "bad-blocks" value presence under "System/Resources";
- fixed bridge port MAC learning parameter values;
- fixed "IP/IPsec/Peers" section sorting;
- fixed "write-sect-since-reboot" value presence under "System/Resources";
- properly close session when uploading multiple files to the device at the same time;
- removed duplicate "20/40/80MHz" value from "channel-width" setting options;
- renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
- show HT MCS tab when "5ghz-n/ac" band is used;
- show "Switch" menu on hAP ac^2 devices;
- show "System/RouterBOARD/Mode Button" on devices that has such feature;
- added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
- allow to specify full URL in SCEP certificate signing process;
- by default specify keepalive timeout value for tunnel type interfaces;
- show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
- show "scep-url" for certificates;
- show "sector-writes" on ARM devices that have such counters;
- show "sector-writes" on devices that have such counters;
- show "System/Health" only on boards that have health monitoring;
- added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
- fixed "sfp-connector-type" value presence under "Interface/Ethernet";
- fixed warning presence for "IP/IPsec/Peers" menu;
- properly display all flags for bridge host entries;
- show "System/RouterBOARD/Mode Button" on devices that has such feature;
- added 64,8 GHz frequency to w60g interface frequency settings;
- show "sector-writes" on devices that have such counters;
- show "sector-writes" on ARM devices that have such counters;
- show "System/Health" only on devices that have health monitoring;
- added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
- allow to specify full URL in SCEP certificate signing process;
- by default specify keepalive timeout value for tunnel type interfaces;
- show "scep-url" for certificates;
- show "System/Health" only on boards that have health monitoring;
- show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
- allow to specify "any" as wireless "access-list" interface;
- fixed "/ip dhcp-server network set dns-none" parameter;
- show "Switch" menu on cAP ac devices;
- fixed bridge port MAC learning parameter values;
- show "Switch" menu on cAP ac devices;
- show correct "Switch" menus on CRS328-24P-4S+;
- added "antenna" setting under GPS settings for MIPS platform devices;
- added "crl-store" setting to certificate settings;
- added "insert-queue-before" to DHCP server;
- added "use-dn" setting in OSPF instance General menu;
- added 160 MHz "channel-width" to wireless settings;
- added DHCPv6 client info request type and updated statuses;
- added missing protocol numbers to IPv4 and IPv6 firewall;
- added possibility to delete SMS from inbox;
- allow to comment new object without committing it;
- allow to open bridge host entry;
- fixed name for "out-bridge-list" parameter under bridge firewall rules;
- fixed typo from "UPtime" to "Uptime";
- fixed Winbox closing when viewing graph which does not contain any data;
- improved stability when using trackpad scrolling in large lists;
- made UDP local and remote TX size parameters optional in Bandwidth Test tool;
- moved "ageing-time" setting from STP to General tab;
- moved OSPF instance "routing-table" setting in OSPF instance General menu;
- removed “VLAN” section from “Switch” menu for CRS3xx devices;
- show Bridge Port PVID column by default;
- show CQI in LTE info;
- show dual SIM options only for RouterBOARDS which does have two SIM slots;
- show only master CAP interfaces under CAPsMAN wireless scan tool;
- use proper graph name for HDD graphs;
- made UDP local and remote TX size parameters optional in Bandwidth Test tool;
- show dual SIM options only for RouterBOARDs which does have two SIM slots;
- use proper graph name for HDD graphs;
- fixed "/tool e-mail send" attachment behavior;
- fixed maximal ID for Traffic Generator stream;
- made UDP local and remote TX size parameter optional in Bandwidth Test tool;
- removed "Enable" and "Disable" buttons from IPsec "mode-config" list;
- show "D" flag under "/ip dhcp-client" menu;
- use proper graph name for HDD graphs;
- fixed "/tool e-mail send" attachment behavior;
- fixed maximal ID for Traffic Generator stream;
- removed "Enable" and "Disable" buttons from IPsec "mode-config" list;
- show "D" flag under "/ip dhcp-client" menu;
- allow to specify "to-ports" for "action=masquerade";
- changed default bridge port PVID value to 1;
- added "dhcp-option-set" to DHCP server;
- allow to specify "to-ports" for "action=masquerade";
- do not show "hw" option on non-Ethernet interfaces;
- do not show VLAN related settings in switch port menu on CRS3xx boards;
- added "W60G station" tab in Wireless menu;
- added "notrack-chain" setting to IPSec peers;
- added support for "_" symbol in terminal window;
- added switch menu on RB1100AHx4;
- do not show MetaROUTER stuff on RB1100AHx4;
- do not show duplicate "Switch" menus for CRS326;
- do not show duplicate "Template" parameters for filter in IPSec policy list;
- do not show duplicate filter parameters "Published" in ARP list;
- do not show unnecessary tabs from "Switch" menu;
- fixed "/certificate sign" process;
- fixed bridge port sorting order by interface name;
- show warnings under "/system routerboard settings" menu;
- allow shorten bytes to k,M,G in Hotspot user limits;
- added possibility to define "comment" for "/routing bgp network" entries;
- added support for certificate CRL list;
- do not show LCD menu for devices which does not have it;
- fixed ARP table update after entry changes state to incomplete;
- hide "level" and "tunnel" parameters for IPSec policy templates;
- hide FAN speed if it is 0RPM;
- make IPSec policies table an ordered list;
- properly show "dhcp-server" warnings;
- show "/interface wireless cap print" warnings;
- show "/system health" only on boards that have health monitoring;
- show "D" flag under "/interface mesh port" menu;
- added possibility to define "comment" for "/routing bgp network" entries;
- do not show FAN related information under "/system health" menu for devices which does not have it;
- do not show LCD menu for devices which does not have it;
- fixed ARP table update after entry changes state to incomplete;
- added certificate settings;
- added support for certificate CRL list;
- do not show LCD menu for devices which does not have it;
- hide "level" and "tunnel" parameters for IPSec policy templates;
- hide FAN speed if it is 0RPM;