Version: 7.2rc1
Testing106 changelog entries across 41 component(s)
2021-Dec-17 (4 years ago)
| Component | Change |
|---|---|
| arm64 | improved low disk space handling condition on upgrade; |
| backup | added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only); |
| backup | fixed automatic backup generation when resetting configuration; |
| bgp | do not export default BGP values; |
| bgp | improvements on detecting peers local address when IPv6 link-local addresses are used; |
| bluetooth | allow to export device, advertiser and scanner configuration; |
| capsman | improved system stability when processing CAP packet by Mangle; |
| certificate | allow to choose digest algorithm for CSR signing; |
| certificate | made "fingerprint" parameter read-only; |
| chr | improved system stability when writing into memory; |
| chr | temporarily suspended downgrade to RouterOS v6; |
| console | fixed "print" command with additional "where" condition; |
| console | made "password" parameter mandatory when creating a new user; |
| console | properly erase CLI history after configuration reset; |
| crs3xx | fixed CPU load balancing for ARM dual core devices; |
| dhcp-server | fixed DHCP Option decimal value parsing; |
| dhcp-server | fixed statistics sending in "Accounting Stop" packets; |
| dhcp-server | send "Class" attribute in "Accounting Request" when provided by RADIUS; |
| dhcpv4-server | allow adding comments; |
| dhcpv4-server | reset dynamic "bcast" flag when receiving offer from DHCP relay; |
| dhcpv4-server | reset offer counter when receiving offer from DHCP relay; |
| ethernet | improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG); |
| graphing | properly generate interface graph for traffic higher than 2.1Gbps; |
| hotspot | fixed login page over HTTPS; |
| ipsec | added hardware acceleration support for CCR2116; |
| l3hw | fixed HW offloaded routing when using 7 or more VLAN interfaces; |
| l3hw | fixed ICMP message when routed packet exceeds MTU and DF flag is set; |
| l3hw | fixed bonding source MAC address; |
| l3hw | improved system stability when using 7 or more VLAN interfaces; |
| lora | fixed "antenna-gain" parameter unit; |
| lte | added basic information support for Telit LM960 and LM940 in MBIM mode; |
| lte | expose diagnostics channel for all modems; |
| lte | fixed "monitor" command to not report old info; |
| lte | fixed packet forwarding on R11e-4G and R11e-LTE-US; |
| ntp | print log change time with time-zone applied; |
| ospf | fixed distance if "originate-default" is set to "always"; |
| ospf | fixed neighbor stuck in ExStart; |
| ospf | fixed simple authentication; |
| ospf | improved logging; |
| ospf | improved overall stability; |
| ospf | improved stability for very large LSDB; |
| ospf | improved stability when DR goes down; |
| ospf | improves stability when handling looped back OSPF packets; |
| ovpn | added SHA2 authentication algorithm support; |
| ovpn | added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets; |
| ovpn | added option to send disconnect message in UDP mode; |
| ovpn | fixed large option message parsing; |
| poe | update PoE firmware only on devices that support it; |
| ppp | show local and remote IPv6 addresses (CLI only); |
| pppoe | added option to configure "host-uniq" parameter; |
| pppoe | added option to ignore PADI messages with empty service name; |
| pppoe | use default MTU of 1492; |
| pptp | added insecure connection warning; |
| queue | improved system stability when processing traffic; |
| route | fixed "min-prefix" configuration when set to 0; |
| route-filters | allow to filter and modify default route if "originate-default" is set to "always"; |
| route-filters | fixed possible address list race condition and memory leak; |
| socks | fixed SOCKS5 support; |
| ssh | fixed forwarding with IPv6 link-local addresses; |
| ssl | fixed CA certificate processing when "subjAltName" is marked as critical; |
| supout | added "port-controller" bridge section; |
| tr069-client | accept 200-299 codes for HTTP diagnostics; |
| tr069-client | added support for wireless client uptime reporting; |
| upgrade | improved 404 error handling when checking for new versions; |
| upgrade | improved downgrade prompt message; |
| user | removed obsolete "tikapp" policy; |
| user | send "Class" attribute in "Accounting Request" when provided by RADIUS; |
| webfig | fixed default configuration popup presence; |
| webfig | fixed user policy lookup for skin designer; |
| wifiwave2 | added support for handling disconnect request messages from RADIUS servers; |
| wifiwave2 | fixed calling "scan" and "frequency-scan" commands through the API; |
| winbox | added "Mode" parameter under "Wireless" menu with WifiWave2 package; |
| winbox | added "TLS Version" parameter for "Interface/OVPN"; |
| winbox | added "VRF" parameter for "SSH" and "Telnet" menus; |
| winbox | added interface list support for "IP/Traffic Flow" menu; |
| winbox | added local/remote CPU load parameters for "Bandwidth Test"; |
| winbox | added support for "Tool/Speedtest" menu; |
| winbox | added support for W60G align tool; |
| winbox | changed "Accept Redirects" parameter type under "IPv6/Settings" menu; |
| winbox | do not require "name" and "file name" parameters for certificate import/export; |
| winbox | do not show connection tracking table if it has more than 10000 entries; |
| winbox | fixed "Switch" menu on Chateau devices; |
| winbox | fixed "expires-after" certificate parameter value; |
| winbox | fixed address list type parameters in "Routing" menu; |
| winbox | fixed error message when adding NTH rule with "0" value; |
| winbox | fixed minor typo under "LTE" interface menu; |
| winbox | made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu; |
| winbox | made "Routing Filters/Rules" table sortable; |
| winbox | moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops"; |
| winbox | properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu; |
| winbox | properly update ethernet auto negotiation status on CHR; |
| winbox | renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu; |
| winbox | renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu; |
| winbox | report local terminal session as "local" instead of "telnet"; |
| winbox | require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu; |
| winbox | require non empty "Packet Mark" value under "Queues" menu; |
| winbox | show "Lost Ratio" column by default under "Tools/Traffic Generator" menu; |
| winbox | show "Routes" column by default under "PPP/Secrets" menu; |
| winbox | show additional columns by default for "Wireless" menu with WifiWave2 package; |
| winbox | updated default "Routing/BGP/Peer Cache" table appearance; |
| winbox | use "total" as default value for "Tools/Profile"; |
| wireguard | fixed IPv6 LL address generation; |
| wireguard | made "preshared-key" and "private-key" values sensitive; |
| wireless | added information about client signal strength to log messages about disconnections; |
| wireless | fixed frequency range information for IPQ4019 interfaces; |
| zerotier | properly handle IP address change; |