Component: winbox
2,174 changelog entries across 319 version(s)
Releases by channel (stacked)
- added comment for DHCPv6 relay;
- added group numbers for DH and PFS groups for IPsec;
- fixed Remote AS setting under the Routing/BGP/Connections menu;
- fixed Src/Dst Address Type under the IP/Firewall/NAT menu;
- improved Routing/PIM SM menu;
- move bridge IGMP Snooping checkbox to IGMP tab;
- rename DHCPv6 server binding "Peer Address" to "Client Address";
- show "External Antenna Selected" field only when "auto" selected;
- updated socksify icon for firewall NAT rules;
- added "Force Check" for local upgrade;
- added comment in "System/Ports/Remote Access" menu;
- added confirmation message to Format Drive;
- added Container Repull command;
- added error reporting to CAPsMAN Manager menu;
- added GUI support for IPsec QDK;
- added missing LoRa channel fields;
- added missing route flags;
- added route ISIS tab;
- added socsify icon for firewall NAT rules;
- added SwOS Allow From field;
- added warning when changing global script variables;
- allow using specified skin without the sensitive policy;
- fixed applying a skin to a user authenticated with RADIUS;
- fixed applying a skin to WinBox if it was uploaded via the branding package;
- fixed default flag in certain menus;
- fixed empty "Realm Raw" value processing and value inheritance from configuration template (requires WinBox 4);
- fixed L3HW default value for VLAN interface (introduced in v7.21);
- fixed modem firmware-upgrade for the RG650E-EU modem;
- fixed the "New QoS Profile" field for switch rules;
- make File Share URL field clickable;
- move "Default" panel from "IPv6/ND/Proxy" to "IPv6/ND/Prefixes";
- rearrange filter wizard parameters in tabs;
- recognize imported certificate key size;
- rename "Change Now" to "Change" button in "System/Password" menu;
- replace "DHCP" with "DHCPv6" in IPv6 menus;
- set "Mount Filesystem" by default under "System/Disk" menu;
- show MPLS tab only to relevant routes;
- show separator after "Protocol" field for IPv6 Firewall rules;
- show warnings in "MPLS/Traffic Eng/Tunnel" menu;
- updated some setting and title names;
- updated various WiFi properties;
- fixed L3HW default value for VLAN interface (introduced in v7.21);
- rearrange filter wizard parameters in tabs;
- added missing route flags;
- added route ISIS tab;
- show MPLS tab only to relevant routes;
- added local table, mangle action and VRF setting under "Routing/Rule" menu;
- fixed empty "Realm Raw" value processing and value inheritance from configuration template (requires WinBox 4);
- set "Mount Filesystem" by default under "System/Disk" menu;
- added Container Repull command;
- added SwOS Allow From field;
- move "Default" panel from "IPv6/ND/Proxy" to "IPv6/ND/Prefixes";
- show separator after "Protocol" field for IPv6 Firewall rules;
- added confirmation message to Format Drive;
- added error reporting to CAPsMAN Manager menu;
- added socsify icon for firewall NAT rules;
- fixed the "New QoS Profile" field for switch rules;
- fixed modem firmware-upgrade for the RG650E-EU modem;
- make File Share URL field clickable (additional fixes);
- updated some setting and title names;
- added "Last Status" and "Last Address" fields in "Tools/Email" menu;
- added file selector for BTH files;
- added Forwarding Table in "MPLS" menu;
- added missing "SM-DP+ Oid" LTE eSIM provisioning field;
- added Sessions tab in "Routing/RPKI" menu;
- added support for new settings and fixed several existing ones;
- Bandwidth test, Speed test, Ping, Traceroute tools use RouterOS DNS service to resolve domain names;
- fixed "Too many entries" not showing in WinBox v4;
- fixed Disk iscsi/smb configuration;
- fixed Disk NVMe-TCP configuration;
- fixed Dude/Tools appearance after Apply action;
- fixed graphs in some forms with big numbers;
- fixed Keepalive Time format in "Routing/BGP" menus;
- fixed Preshared Key "auto" and "none" options for WireGuard Peer;
- fixed switch QoS monitor for mirror properties;
- hide certificate "Issuer" field for certificate template;
- hide IPv6 addresses for IP neighbors that no longer have them;
- make multiple address fields required;
- make separate inputs for WiFi Interworking "Authentication Types" and "Connection Capabilities" fields;
- make VETH gateway fields not required;
- move VRF from Ethernet to generic Interface table;
- removed "Add" for dynamic DNS servers;
- reorder BGP and OSPF tabs in logical order;
- restore route max object 10000 limit;
- show "Trusted" field for certificate template;
- show warnings in "Routing/BGP" menus;
- show warnings in Disk menu;
- updated and shortened window titles (e.g. Address List -> Addresses);
- fixed Preshared Key "auto" and "none" options for WireGuard Peer;
- added "Force Check" for local upgrade;
- added comment in "System/Ports/Remote Access" menu;
- added GUI support for IPsec QDK;
- added missing LoRa channel fields;
- added warning when changing global script variables;
- allow using specified skin without the sensitive policy;
- fixed applying a skin to a user authenticated with RADIUS;
- fixed applying a skin to WinBox if it was uploaded via the branding package;
- fixed default flag in certain menus;
- fixed Preshared Key "auto" and "none" options for WireGuard Peer;
- make File Share URL field clickable;
- recognize imported certificate key size;
- rename "Change Now" to "Change" button in "System/Password" menu;
- replace "DHCP" with "DHCPv6" in IPv6 menus;
- show warnings in "MPLS/Traffic Eng/Tunnel" menu;
- updated various WiFi properties;
- group L3 and L4 fields under switch rules menu;
- added missing "SM-DP+ Oid" LTE eSIM provisioning field;
- hide certificate "Issuer" field for certificate template;
- show "Trusted" field for certificate template;
- group L3 and L4 fields under switch rules menu;
- added Forwarding Table in "MPLS" menu;
- added Sessions tab in "Routing/RPKI" menu;
- fixed Keepalive Time format in "Routing/BGP" menus;
- reorder BGP and OSFP tabs in logical order;
- show "Bus" parameter for "USB Power Reset" on Chateau LTE6/LTE18 ax devices;
- show "System/RouterBOARD/Mode Button" on devices that have such a button;
- show warnings in "Routing/BGP" menus;
- show "Bus" parameter for "USB Power Reset" on Chateau LTE6/LTE18 ax devices;
- show "System/RouterBOARD/Mode Button" on devices that have such a button;
- added "Last Status" and "Last Address" fields in "Tools/Email" menu;
- fixed switch QoS monitor for mirror properties;
- added IP/Socksify menu;
- fixed Ethernet Tx Stats (introduced in v7.20);
- added IP/Socksify menu;
- added support for 200Gbps/400Gbps Rate fields;
- fixed Ethernet Tx Stats (introduced in v7.20);
- added support for 200Gbps/400Gbps Rate fields;
- Bandwidth test, Speed test, Ping, Traceroute tools use RouterOS DNS service to resolve domain names (additional fixes);
- make VETH gateway fields not required;
- removed "Add" for dynamic DNS servers;
- fixed WinBox 3 application failure when opening IPv6/Firewall/Connection entry (introduced in v7.20);
- added file selector for BTH files;
- added support for new settings and fixed several existing ones;
- Bandwith test, Speed test, Ping, Traceroute tools use RouterOS DNS service to resolve domain names;
- fixed "Too many entries" not showing in WinBox v4;
- fixed Disk iscsi/smb configuration;
- fixed Disk NVMe-TCP configuration;
- fixed Dude/Tools appearance after Apply action;
- fixed graphs in some forms with big numbers;
- fixed WinBox 3 application failure when opening IPv6/Firewall/Connection entry (introduced in v7.20);
- hide IPv6 addresses for IP neighbors that no longer have them;
- make multiple address fields required;
- make separate inputs for WiFi Interworking "Authentication Types" and "Connection Capabilities" fields;
- move VRF from Ethernet to generic Interface table;
- restore route max object 10000 limit;
- show warnings in Disk menu;
- updated and shortened window titles (e.g. Address List -> Addresses);
- added "Digest Algorithm" under "System/Certificates" menu;
- added "Note" field in LTE Firmware Upgrade;
- added "Reselect Time" for wifi;
- added Address List Extra Time under "IP/DNS" menu;
- added EAP identity under "WiFi/Registration" menu;
- added Heartbeat under "Bridge/MLAG" menu;
- added Installation under "WiFi" menu;
- added missing columns under "System/Users/SSH Keys" menu;
- added missing Comments under "User Manager" menus;
- added missing properties to "Container" menu and improved field ordering;
- added missing WPA2 PSK SHA2 option under "WiFi/Security" menu;
- added MPLS Mangle;
- added option to create new entries under "System/Users/SSH Keys" menu;
- allow to specify CAPsMAN Address as IPv6 LL;
- bump minimal WinBox version to 3.42;
- correctly unset Locked CAPsMAN field;
- differentiate PPP Profile Rx/Tx Queue settings;
- display errors from the "Files/Sync" menu;
- fixed "Rate" and "Full Duplex" monitor values after link down under "Interface/Ethernet" menu;
- fixed container RAM parameter type;
- fixed missing warning under "Routing/BGP/Instances" menu;
- fixed Record Type field under "Tools/Netwatch" menu;
- improved byte type field representation;
- improved Switch QoS layout;
- make IPv6 Immediate Gateway read-only;
- make log message field as multiline;
- move CAPsMAN settings button from Remote CAP to WiFi table;
- removed duplicate mounts option;
- rename Ping Timeout field to Interval;
- rename SMS Type field to Modem Type;
- rework LTE firmware upgrade buttons into one window;
- show "Switch" related menus only on boards that support such features;
- show all columns under "System/Users/SSH Keys" menu by default;
- use same WireGuard default values as in console;
- fixed "auto" as default value for VXLAN "Don't Fragment" property;
- allow selecting bonding interface under "Switch/Rule" menu;
- use "auto" as default value for VXLAN "Don't Fragment" property;