MikroTik Changelogs
← Back to search All versions

Version: 6.49beta22

Testing

63 changelog entries across 28 component(s)

2021-Mar-08 (5 years ago)

Component Change
bridge added IGMP and MLD querier monitoring (CLI only);
bridge added IGMP snooping log when multicast table gets full;
bridge added MAC and IP source addresses information for DHCP snooping log;
bridge improved bridge stability when host changes port (introduced in v6.47);
conntrack increased total connection tracking table size based on installed RAM size;
console require "write+ftp" permissions for executing script to file;
console require "write+ftp" permissions for exporting configuration to file;
console require "write+ftp" permissions for printing to file;
console updated copyright notice;
crs3xx correctly filter packets by L2MTU on 1Gbps Ethernet interfaces for CRS354 devices;
crs3xx fixed interface flow control;
crs3xx fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
crs3xx fixed SFP and SFP+ link rate reporting (introduced in v6.48beta11);
crs3xx improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
crs3xx improved system stability when receiving large frames on CPU for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
defconf removed overlapping IPv6 firewall rules;
dhcp fixed link state checking for DHCP client;
dhcpv6-server check if pool name has changed from RADIUS on renew;
ethernet improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
firewall fixed GRE protocol packets considered invalid when PPTP helper is disabled;
health fixed voltage monitor on BaseBox5 devices;
ike2 fixed DH group negotiation with EAP;
ike2 fixed initial traffic selector's protocol and port in transport mode;
ipv6 improved system stability when parsing IPv6 options;
lora added additional predefined network servers;
m33g removed 12..16 pins from "/system gpio" menu;
netinstall fixed lock file persistence after reinstall;
poe do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;
ppp do not fail "at-chat" command when issued on disabled PPP interface;
quickset prefer 5GHz interface for WiFi scan in CPE mode;
rb922 fixed miniPCI-e card detection (introduced in v6.49beta11);
supout fixed "topic" column presence in "Log" section;
supout print detailed list of active user sessions;
switch improved resource allocation on 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
swos fixed "static-ip-address" parameter;
telnet do not send options if connecting to non standard port;
telnet fixed server when run on non standard port;
upgrade improved "long-term" upgrade procedure on SMIPS devices;
user fixed "skin" configuration for user groups (introduced in v6.48);
webfig allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu;
webfig do not corrupt settings when starting "Wireless Sniffer";
webfig do not move top right menu in opposite direction when scrolling horizontally;
webfig do not show newly created SMB shares as invalid;
webfig do not show value units twice;
webfig fixed interface sorting by name;
webfig fixed new interface addition;
webfig fixed "Wireless/CAP" menu opening;
webfig show "Interfaces" menu by default after logging in;
webfig show "network-mode" for LTE modems that support it;
webfig show only "Close" button under "Wireless/Wireless Sniffer/Sniffed Packets" menu;
winbox added "Channel" parameter under "System/Console" menu;
winbox added "interface-speed-100G" LED type to "System/LEDs" menu;
winbox fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
winbox fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
winbox fixed "reachable-time" value unit under "IPv6/ND" menu;
winbox fixed support for "Delegated-IPv6-Prefix" for PPP services;
winbox increased "target" field limit to 128 under "Queues" menu;
winbox show "activity" column by default under "IP/Kid Control/Devices" menu;
winbox show "LCD" only on boards that have LCD;
winbox show "System/Health" only on boards that have health monitoring;
wireless fixed minor typo in debug logging messages;
wireless renamed "secondary-channel" to "secondary-frequency";
wireless updated "united kingdom" regulatory domain information;