Component: winbox

6.48beta12 Testing 2020-Jul-06 (6 years ago)

• allow performing "USB Power Reset" on "0" bus on RBM33G;
• fixed flag displaying under "IP/DNS/Static" table;
• fixed "IP->Kid Control->Devices" table automatic refreshing;
• fixed minor typo in "BGP/Peer" menu;
• fixed minor typo in "Users" menu;
• fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu;
• fixed "tls-version" parameter setting under "IP/Services" menu;
• hide irrelevant switch port parameters;
• use health values reported by gauges for "System/Health" menu;

6.47 Stable 2020-Jun-02 (6 years ago)

• allow setting "Primary" parameter for "balance-tlb" bonding interfaces;
• allow to specify any Ethernet like interface under "Tool/WoL" menu;
• do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
• fixed "BGP Origin" value display under "IPv6->Routes" menu;
• fixed "Data Rate" checkbox alignment (WinBox v3.22 required);
• fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
• fixed WDS usage when connecting to RouterOS access point using QuickSet;
• fixed bonding type interface support for "Switch->Host" table;
• fixed dates and times in interface link up/down properties (WinBox v3.24 required);
• fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
• fixed wireless sniffer parameter setting;
• limit number of simultaneous WinBox sessions to 5 for users without "write" permission;
• made "yes" the default value for "Inject Summary LSAs" parameter when creating a new NSSA or STUB area;
• removed duplicate "join-eui", "dev-eui", "counter", "chain", "size" and "payload" parameters under "LoRa/Traffic";
• renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
• show "Hardware Offload" parameter for bonding interfaces;
• updated icon design;
• added "Rate" parameter for switch ACL rules;
• added "auth-info" parameter under "Dot1X->Active" menu;
• added "auth-types", "comment", "mac-auth-mode" and "reject-vlan-id" parameters for Dot1X server;
• added "auto-erase" option to "Tool/SMS" menu;
• added "bus" parameter for "USB Power Reset" command on NetMetal ac^2;
• added "bus" parameter for "USB Power Reset" command on RBM33G;
• added "comment" parameter and "dynamic" flag support under "Switch->Rule" table;
• added "comment" parameter for Dot1X client;
• added "region" parameter for W60G interfaces;
• added "skip-dfs-channels" parameter to wireless interface menu;
• added comment support for "Switch->VLAN" menu;
• added enable and disable buttons for "MPLS->MPLS Interface" table;
• added support for inline bar graphs for LTE signal values;
• aligned all "IP->Traffic Flow->IPFIX" check boxes in single line (WinBox v3.22 required);

6.47rc2 Testing 2020-May-25 (6 years ago)

• added "auth-info" parameter under "Dot1X->Active" menu;
• added "auth-types", "comment", "mac-auth-mode" and "reject-vlan-id" parameters for Dot1X server;
• added "bus" parameter for "USB Power Reset" command on NetMetal ac^2;
• added "comment" parameter and "dynamic" flag support under "Switch->Rule" table;
• added "comment" parameter for Dot1X client;
• added "region" parameter for W60G interfaces;
• added "skip-dfs-channels" parameter to wireless interface menu;
• added enable and disable buttons for "MPLS->MPLS Interface" table;
• do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
• fixed WDS usage when connecting to RouterOS access point using QuickSet;
• fixed dates and times in interface link up/down properties (WinBox v3.24 required);
• fixed wireless sniffer parameter setting;

6.45.9 Long-term 2020-Apr-30 (6 years ago)

• added "Options" parameter support for DHCPv6 client and server;
• added 160Mhz extension channel support for CAPsMAN;
• added support for "Tools->WoL" menu;
• do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
• fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
• fixed "Bands" parameter display for LTE interfaces;
• fixed "DSCP" parameter value setting;
• fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
• fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
• fixed "Switch" menu on CRS354-48P-4S+2Q+;
• fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
• fixed "invalid" flag presence under "System/Certificates/CRL" menu;
• fixed automatic "IPv6->Firewall->Address List" table update;
• increased limit of multi-entry fields to 100;
• made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
• renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
• renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
• show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.46.6 Stable 2020-Apr-27 (6 years ago)

• fixed memory leak (introduced in v6.46.4);
• increased limit of multi-entry fields to 100;

6.47beta60 Testing 2020-Apr-24 (6 years ago)

• added "bus" parameter for "USB Power Reset" command on RBM33G;
• allow to specify any ethernet like interface under "Tool/WoL" menu;
• fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
• fixed memory leak (introduced in v6.46.4);
• fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
• increased limit of multi-entry fields to 100;
• limit number of simultaneous WinBox sessions to 5 for users without "write" permission;

6.46.5 Stable 2020-Apr-07 (6 years ago)

• added "Options" parameter support for DHCPv6 client and server;
• added 160Mhz extension channel support for CAPsMAN;
• added support for "Tools->WoL" menu;
• allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter;
• do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
• fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
• fixed "Bands" parameter display for LTE interfaces;
• fixed "DSCP" parameter value setting;
• fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
• fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
• fixed "Switch" menu on CRS354-48P-4S+2Q+;
• fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
• fixed automatic "IPv6->Firewall->Address List" table update;
• made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
• properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu;
• renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
• show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.47beta49 Testing 2020-Mar-20 (6 years ago)

• added "Options" parameter support for DHCPv6 client and server;
• added "Rate" parameter for switch ACL rules;
• added 160Mhz extension channel support for CAPsMAN;
• added comment support for "Switch->VLAN" menu;
• added support for "Tools->WoL" menu;
• aligned all "IP->Traffic Flow->IPFIX" check boxes in single line (WinBox v3.22 required);
• allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter;
• allow setting "Primary" parameter for "balance-tlb" bonding interfaces;
• do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
• fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
• fixed "BGP Origin" value display under "IPv6->Routes" menu;
• fixed "Bands" parameter display for LTE interfaces;
• fixed "DSCP" parameter value setting;
• fixed "Data Rate" checkbox alignment (WinBox v3.22 required);
• fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
• fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
• fixed "Switch" menu on CRS354-48P-4S+2Q+;
• fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
• fixed automatic "IPv6->Firewall->Address List" table update;
• fixed bonding type interface support for "Switch->Host" table;
• made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
• made "yes" the default value for "Inject Summary LSAs" parameter when creating a new NSSA or STUB area;
• properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu;
• renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
• renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
• show "Hardware Offload" parameter for bonding interfaces;
• show "System/RouterBOARD/Mode Button" on devices that have such feature;
• updated icon design;

6.46.4 Stable 2020-Feb-21 (6 years ago)

• completely removed old style authentication method;
• fixed "invalid" flag presence under "System/Certificates/CRL" menu;

6.47beta35 Testing 2020-Feb-17 (6 years ago)

• updated icon design;

6.47beta32 Testing 2020-Feb-10 (6 years ago)

• added support for inline bar graphs for LTE signal values;
• completely removed old style authentication method;
• fixed "invalid" flag presence under "System/Certificates/CRL" menu;

6.46.3 Stable 2020-Jan-28 (6 years ago)

• removed duplicate "counter", "chain", "size" and "payload" parameters under "LoRa/Traffic";

6.45.8 Long-term 2020-Jan-23 (6 years ago)

• automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
• show "LCD" menu only on boards that have LCD screen;

6.46.2 Stable 2020-Jan-14 (6 years ago)

• automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
• fixed "Default Route Distance" default value when creating new LTE APN;
• removed duplicate "join-eui" and "dev-eui" parameters under "Lora/Traffic";

6.47beta19 Testing 2020-Jan-09 (6 years ago)

• automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
• fixed "Default Route Distance" default value when creating new LTE APN;
• removed duplicate "join-eui", "dev-eui", "counter", "chain", "size" and "payload" parameters under "Lora/Traffic";

6.46.1 Stable 2019-Dec-13 (6 years ago)

• fixed "allowed-number" parameter setting invalid value in "Tool/SMS" menu;
• show "LCD" menu only on boards that have LCD screen;

6.47beta8 Testing 2019-Dec-10 (6 years ago)

• added "auto-erase" option to "Tool/SMS" menu;
• fixed "allowed-number" parameter setting invalid value in "Tool/SMS" menu;
• show "LCD" menu only on boards that have LCD screen;

6.46 Stable 2019-Dec-02 (6 years ago)

• removed "Set CA Passphrase" button from "Certificate" menu;
• renamed "Queue Limit" to "Queue Size" for "pcq-upload-default" and "pcq-download-default" parameters;
• replaced "kb" with "KiB" in "Tools/Packet Sniffer" menu;
• show "Switch" menu on RBwAPGR-5HacD2HnD;
• show "System/RouterBOARD/Mode Button" on devices that have such feature;
• added "ip-address" and stats columns in "IP/Kid-Control/Devices" menu;
• added "public-address-ipv6" parameter to "IP/Cloud" menu;
• added "reset-counters" button to "IP/Kid Control/Devices" menu;
• added "tx-info-field" parameter to "Wireless/W60G" menu;
• added "Vendor Classes" tab in "IP/DHCP Server" menu;
• added wireless alignment LED types to "System/LEDs" menu;
• fixed allowed range for bridge filter "new-priority" parameter;
• fixed "CAPs Scanner" stopping;
• fixed "cluster-id" parameter setting in "Routing/BGP/Instances" menu;
• fixed file locking when uploading multiple files at once;
• fixed firewall limit parameter support for rates more than 4G;
• fixed invalid flag presence in "IP/SMB/Shares" menu;
• fixed "Routing" menu icon presence when there is no routing package installed;
• improved stability when transfering multiple files between multiple windows;
• properly show timestamp in file "Creation Time" field;

6.46rc1 Testing 2019-Nov-26 (6 years ago)

• added enable/disable and comment buttons for "IP->SNMP->Communities" menu;
• fixed field validation with negative integers (introduced in v6.46beta);

6.46beta68 Testing 2019-Nov-21 (6 years ago)

• fixed "CAPs Scanner" stopping;

6.45.7 Stable 2019-Oct-24 (6 years ago)

• show SFP tab for QSFP interfaces;

6.44.6 Long-term 2019-Oct-24 (6 years ago)

• added "auto-erase" parameter to "Tools/SMS" menu;
• added "https-redirect" parameter to "IP/Hotspot/Profiles menu";
• added "revision" parameter to "System/Routerboard" menu;
• removed "max-sms" parameter from "Tools/SMS" menu;

6.45.5 Stable 2019-Aug-26 (7 years ago)

• added "auto-erase" parameter to "Tools/SMS" menu;
• added "https-redirect" parameter to "IP/Hotspot/Profiles menu";
• added "revision" parameter to "System/Routerboard" menu;
• removed "max-sms" parameter from "Tools/SMS" menu;

6.46beta28 Testing 2019-Aug-08 (7 years ago)

• added "auto-erase" parameter to "Tools/SMS" menu;
• added "https-redirect" parameter to "IP/Hotspot/Profiles menu";
• added "ip-address" and stats columns in "IP/Kid-Control/Devices" menu;
• added "public-address-ipv6" parameter to "IP/Cloud" menu;
• added "reset-counters" button to "IP/Kid Control/Devices" menu;
• added "revision" parameter to "System/Routerboard" menu;
• added "tx-info-field" parameter to "Wireless/W60G" menu;
• added "Vendor Classes" tab in "IP/DHCP Server" menu;
• added wireless alignment LED types to "System/LEDs" menu;
• fixed allowed range for bridge filter "new-priority" parameter;
• fixed "cluster-id" parameter setting in "Routing/BGP/Instances" menu;
• fixed file locking when uploading multiple files at once;
• fixed firewall limit parameter support for rates more than 4G;
• fixed invalid flag presence in "IP/SMB/Shares" menu;
• fixed "Routing" menu icon presence when there is no routing package installed;
• improved stability when transfering multiple files between multiple windows;
• removed "max-sms" parameter from "Tools/SMS" menu;
• removed "Set CA Passphrase" button from "Certificate" menu;
• renamed "Queue Limit" to "Queue Size" for "pcq-upload-default" and "pcq-download-default" parameters;
• replaced "kb" with "KiB" in "Tools/Packet Sniffer" menu;
• show "Switch" menu on RBwAPGR-5HacD2HnD;
• show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.46beta9 Testing 2019-Jul-11 (7 years ago)

• properly show timestamp in file "Creation Time" field;