Component: winbox

6.44beta50 Testing 2018-Dec-17 (7 years ago)

• added "allow-roaming" parameter in "Interface/LTE" menu;
• added "challenge-password" field when signing certificate with SCEP;
• added "conflict-detection" parameter in "IP/DHCP server" menu;
• added src/dst address and in/out interface list columns to default firewall menu view;
• added support for dynamic devices in "IP/Kid Control/Devices" tab;
• allow to change VHT rates when 5ghz-n/ac band is used;
• fixed missing w60g interface status values;
• renamed "Radius" to "RADIUS";
• show "R" flag under "IPv6/DHCP Server/Bindings" tab;
• show "Switch" menu on RB4011iGS+5HacQ2HnD;

6.43.7 Stable 2018-Nov-30 (7 years ago)

• allow to specify SIM slot on LtAP mini;
• enabled "fast-forward" by default when adding new bridge;
• fixed neighbor discovery for IPv6 neighbors;
• show "System/Health" only on boards that have health monitoring;

6.44beta39 Testing 2018-Nov-27 (7 years ago)

• allow to specify SIM slot on LtAP mini;
• enabled "fast-forward" by default when adding new bridge;
• show "Switch" menu on RB4011iGS+5HacQ2HnD;
• show "System/Health" only on boards that have health monitoring;
• show "W60G" wireless tab on wAP 60G AP;

6.42.10 Long-term 2018-Nov-14 (7 years ago)

• allow to specify SIM slot on LtAP mini;
• enabled "fast-forward" by default when adding new bridge;
• show "System/Health" only on boards that have health monitoring;
• show "W60G" wireless tab on wAP 60G AP;

6.42.9 Long-term 2018-Sep-27 (8 years ago)

• show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.44beta9 Testing 2018-Sep-17 (8 years ago)

• added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
• added "allow-dual-stack-queue" setting to "IP/DHCP Server/Leases" menu;
• added "allow-dual-stack-queue" setting to "IPv6/DHCPv6 Server/Bindings" menu;
• added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
• added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
• fixed corrupt user database after specifying allowed address range (introduced in v6.43);
• make bridge port "untrusted" by default when creating new port;
• show "IP/Cloud" menu on CHR;
• show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.43.1 Stable 2018-Sep-17 (8 years ago)

• added "allow-dual-stack-queue" setting to "IP/DHCP Server/Leases" menu;
• added "allow-dual-stack-queue" setting to "IPv6/DHCPv6 Server/Bindings" menu;
• fixed corrupt user database after specifying allowed address range (introduced in v6.43);
• make bridge port "untrusted" by default when creating new port;
• show "IP/Cloud" menu on CHR;
• show "System/RouterBOARD/Mode Button" on devices that have such feature;

6.44beta6 Testing 2018-Sep-11 (8 years ago)

• allow setting "network-mode" to "auto" under LTE interface settings;

6.43 Stable 2018-Sep-06 (8 years ago)

• added bridge Fast Forward statistics counters;
• added "poe-fault" LED trigger;
• added "tag-stacking" option to "Bridge/Ports";
• allow to specify LTE interface when sending SMS;
• fixed arrow key handling within table filter fields;
• fixed "bad-blocks" value presence under "System/Resources";
• fixed bridge port MAC learning parameter values;
• fixed "IP/IPsec/Peers" section sorting;
• fixed "write-sect-since-reboot" value presence under "System/Resources";
• properly close session when uploading multiple files to the device at the same time;
• removed duplicate "20/40/80MHz" value from "channel-width" setting options;
• renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
• show HT MCS tab when "5ghz-n/ac" band is used;
• show "Switch" menu on hAP ac^2 devices;
• show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.43rc66 Testing 2018-Aug-28 (8 years ago)

• added "tag-stacking" option to "Bridge/Ports";
• fixed "bad-blocks" value presence under "System/Resources";
• fixed "IP/IPsec/Peers" section sorting;
• renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
• show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.40.9 Long-term 2018-Aug-20 (8 years ago)

• added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
• allow to specify full URL in SCEP certificate signing process;
• by default specify keepalive timeout value for tunnel type interfaces;
• show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
• show "scep-url" for certificates;
• show "sector-writes" on ARM devices that have such counters;
• show "sector-writes" on devices that have such counters;
• show "System/Health" only on boards that have health monitoring;

6.42.7 Stable 2018-Aug-17 (8 years ago)

• added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
• fixed "sfp-connector-type" value presence under "Interface/Ethernet";
• fixed warning presence for "IP/IPsec/Peers" menu;
• properly display all flags for bridge host entries;
• show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.43rc56 Testing 2018-Aug-13 (8 years ago)

• added "default-route-distance" parameter for "IPv6/DHCP-client" menu;
• fixed "sfp-connector-type" value presence under "Interface/Ethernet";
• fixed warning presence for "IP/IPsec/Peers" menu;
• fixed "write-sect-since-reboot" value presence under "System/Resources";
• show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.43rc45 Testing 2018-Jul-17 (8 years ago)

• properly display all flags for bridge host entries;
• show "System/RouterBOARD/Mode Button" on devices that has such feature;

6.42.6 Stable 2018-Jul-06 (8 years ago)

• added 64,8 GHz frequency to w60g interface frequency settings;
• show "sector-writes" on devices that have such counters;

6.43rc42 Testing 2018-Jul-04 (8 years ago)

• added 64,6 GHz frequency to w60g interface frequency settings;

6.43rc40 Testing 2018-Jul-02 (8 years ago)

• show "sector-writes" on devices that have such counters;
• show "Switch" menu on hAP ac^2 devices;

6.42.5 Stable 2018-Jun-26 (8 years ago)

• show "sector-writes" on ARM devices that have such counters;
• show "System/Health" only on devices that have health monitoring;

6.43rc34 Testing 2018-Jun-21 (8 years ago)

• show "sector-writes" on ARM routers that has such counters;
• show "System/Health" only on boards that have health monitoring;

6.42.4 Stable 2018-Jun-15 (8 years ago)

• added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
• allow to specify full URL in SCEP certificate signing process;
• by default specify keepalive timeout value for tunnel type interfaces;
• show "scep-url" for certificates;
• show "System/Health" only on boards that have health monitoring;
• show firmware upgrade message at the bottom of "System/RouterBOARD" menu;

6.43rc23 Testing 2018-Jun-05 (8 years ago)

• fixed arrow key handling within table filter fields;
• properly close session when uploading multiple files to the router at the same time;
• removed duplicate "20/40/80MHz" value from "channel-width" setting options;
• show "scep-url" for certificates;
• show "System/Health" only on boards that have health monitoring;
• show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
• added "poe-fault" LED trigger;
• added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
• added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
• allow to specify full URL in SCEP certificate signing process;

6.43rc21 Testing 2018-May-29 (8 years ago)

• by default specify keepalive timeout value for tunnel type interfaces;
• show "System/Health" only on boards that have health monitoring;

6.43rc17 Testing 2018-May-23 (8 years ago)

• improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);

6.42.2 Stable 2018-May-17 (8 years ago)

• allow to specify "any" as wireless "access-list" interface;
• fixed "/ip dhcp-server network set dns-none" parameter;

6.40.8 Long-term 2018-Apr-23 (8 years ago)

• show "Switch" menu on cAP ac devices;