Component: lte
631 changelog entries across 113 version(s)
Releases by channel (stacked)
- fixed eSIM profile switching on ATL 5G R16;
- improved notification handling during firmware update for Quectel modems;
- fixed issue for Chateau 5G R17 ax (introduced in v7.21.1);
- fixed APN configuration for QMI modems in a 3G network when use-network-apn=yes is used;
- added support for R11e-LTE6 v039 firmware release;
- added "force-delete" command to allow deletion of active eSIM profiles;
- added additional logging for error reported by modem during APN profile setup;
- added command to send out EUICC generated notifications manually;
- added confirmation prompt when deleting eSIM profile;
- added support for additional D-Link DWM-222 variation (vendor-id="0x2001" device-id="0x7e46");
- added support for additional Huawei E3372-325 variation (vendor-id="0x3566" device-id="0x2001");
- added support for R11e-LTE6 v039 firmware release and availability notification;
- ask for user confirmation before installing eSIM profile;
- clear SIM not present error when performing modem FW upgrade;
- discontinued support for RBSXTLTE3-7, further versions will use v7.20 LTE firmware package;
- do not retry activation for IPv4 and IPv6 APNs on QMI modems if only one address family is assigned;
- fixed cases where LTE monitor could show abnormalities;
- fixed LTE interface IPv6 address generation to use EUI-64 (introduced in v7.20);
- fixed MTU inheritance from master interface in multi-APN setups;
- fixed MTU setting for AT modems;
- fixed no re-connection after cellular network requested APN deactivation on Chateau 5G ax R17;
- force sms-protocol to AT for FG621-EA modem;
- improved AT modems at-chat control channel handling after modem has closed AT channel unexpectedly;
- improved modem recovery for Chateau 5G and Chateau 5G R16;
- improved stability for FG621-EA modem;
- improved system stability when receiving SMS messages;
- provide firmware download URL when no LTE package installed on "SXT LTE3-7";
- relay EUICC generated notifications after profile enable/disable/remove/provision;
- rework multiapn support for AT modems;
- unify "SIM not present" status for all modems;
- fixed LTE interface IPv6 address generation to use EUI-64 (introduced in v7.20);
- fixed no re-connection after cellular network requested APN deactivation on Chateau 5G ax R17;
- fixed LED behavior for Chateau 5G R17 ax;
- fixed issue with firmware update for FG621-EA modem;
- use modem-supplied IPv6 address over EUI-64 when available;
- added "done" status for modem firmware-upgrade version check;
- added "remove-sent-sms-after-send" option to automatically delete sent SMS messages;
- added log entry if eSIM has no profiles on read;
- added modem-init string response to system log;
- added passthrough support for RG650E-EU modem;
- added show-capabilities eSIM presence detection for MBIM modems;
- allow only one IPv6 APN for AT modems;
- display ICCID regardless of SIM PIN entry status;
- do not reconfigure modem if deactive eSIM profile is deleted;
- exempt eSIM provision from global CRL certificate settings;
- exit LTE scan if modem reconfigured;
- fallback to RA for global IPv6 if unattained via AT channel (resets on config change);
- fixed inappropriate LTE interface inactive flag shown during modem initialization;
- fixed modem recovery on unexpected modem reboot for Chateau 5G and Chateau 5G R16;
- fixed progress message for R11e-LTE modem firmware-upgrade;
- fixed rare case where AT dialer could stop;
- improved EC200A-EU firmware-upgrade stability;
- improved SMS sending stability over MBIM protocol;
- refresh eSIM profile list after successful provision;
- renamed "uicc" to "iccid" in LTE monitor and eSIM profile print;
- show ip-type in /interface/lte/apn/print;
- fixed wrong subnet mask set to Chateau 5G R17 ax LTE interface;
- AT modems, fixed typos in commands sent to modem when APN with authentication is used (AT+CGAUTH; AT$QCPDPP);
- R11e-LTE and R11e-LTE6, fixed possible crash on device unexpected removal or during RouterOS shutdown;
- added support for R11e-LTE6 v039 firmware release;
- do not dial further if modem detects eSIM without profiles;
- fixed eSIM management function for mmips and mipsbe architecture CPUs;
- fixed eSIM provisioning for servers that do not send content-length in the HTTP response;
- added UICC parameter in LTE monitor for R11e-4G modem;
- additional fixes for eSIM management support;
- AT modems, improved redialing when modem lost connectivity without notifying host about APN status change;
- automatically enable roaming for known roaming only SIM/eSIM profiles;
- Chateau 5G R16 fix DHCP relay packet forwarding using LTE interface;
- deactivate current eSIM profile before activating new profile;
- fixed default APN for configless modems;
- fixed EC200A-EU APN authentication;
- fixed initialization for Neoway N75 modem;
- fixed initialization for R11e-LTE6 modem;
- fixed LTE passthrough activation issue when IPv6 APN is used;
- fixed LTE status update or possible crash when modem is unexpectedly removed from system;
- fixed MBIM modem recovery after modem unexpected restart;
- fixed modem recovery after firmware upgrade for R11e-LTE modem;
- fixed possible crash or missing IPv6 address on first APN activation when IPv6 capable APN is used;
- fixed Router Advertisement processing issue for AT modems when an APN with "ip-type=ipv6" was configured;
- improved dialer for EC200A-EU modem;
- improved R11e-LTE6 link recovery delay time after unexpected modem registration status changes;
- initial support for user settable modem redial timer;
- initialize Quectel modems as soon as they are ready after unexpected restart;
- reset internal link-recovery-timer on sim slot change;
- set apn profile name the same as apn if no name specified when creating the profile;
- show correct value for 5G SA "current-cellid";
- additional fixes for eSIM management support;
- AT modems, improved redialing when modem lost connectivity without notifying host about APN status change;
- fixed modem recovery after firmware upgrade for R11e-LTE modem;
- fixed Router Advertisement processing issue for AT modems when an APN with "ip-type=ipv6" was configured;
- added at-chat support for EC21EU;
- added basic support for Quectel RG255C-GL modem in "at+qcfg="usbnet",0" USB composition;
- added confirmation-code parameter for eSIM provisioning;
- added initial eSIM management support;
- fixed cases where the MBIM dialer could get stuck;
- fixed Huawei ME909s-120 support;
- fixed interface recovery in mixed multiapn setup for MBIM modems;
- fixed missing 5G info for "/interface lte print" command;
- fixed missing IPv6 prefix advertisement on renamed LTE interfaces;
- fixed prolonged reboots on Chateau 5G ax;
- fixed SIM slot initialization with multi-APN setups;
- improved automatic link recovery and modem redial functions;
- improved initialization for external USB modems;
- lte monitor, show CQI when modem reports it as 0 - undetectable, no RX/down-link resource block assigned to modem by provider;
- R11eL-EC200A-EU fixed online firmware upgrade and added support for firmware update from local file;
- R11eL-EC200A-EU improved failed connection handling and recovery;
- reduce modem initialization time for R11e-LTE-US;
- reduced SIM slot switchover time for modems with AT control channel (except R11e-LTE);
- removed nonexistent CQI reading for EC200A-EU modem;
- added option to check/install modem firmware from early-access/testing channel (CLI only);
- added provider specific firmware update (FOTA) for Cosmote GR networks on Chateau 5G;
- disabled ims service for Chateau 5G on operator "3 AT" network (PLMN ID 23205);
- drop operator selection support for R11e-4G modem as it is unreliable;
- fixed "default-name" property in export when multiple LTE interfaces are used;
- fixed "lte monitor" signal reporting for RG520F-EU modem when connected to 5G SA network;
- fixed "operator" setting for EC200A-EU modem;
- fixed long "PLMN search in progress" for SXT 3-7;
- fixed LTE band setting for SXT LTE 3-7;
- fixed roaming barring (allow-roaming=no) for EC200A-EU modem;
- fixed signal info reporting for FG621-EA modem in UMTS network;
- fixed SMS sender parsing;
- improved modem FW upgrade for Chateau 5G;
- improved R11eL-EC200A-EU modem firmware upgrade procedure;
- improved recovery after unexpected modem reboot for Chateau's 5G and 5G R16 series devices;
- improvements to modem "firmware-upgrade" command;
- MBIM increased assignable APN profile count up to 8 then modem firmware allows it;
- modem firmware update (FOTA), added support to install provider specific version;
- removed trailing "F" symbol from uicc;
- set "sms-read=no" and "sms-protocol=auto" as default values;
- set IPv6 address reporting format in modem init for AT modems and MBIM modems with AT channel;
- added "sms-protocol" setting in "/interface lte" menu (CLI only);
- fixed "at-chat" for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
- fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed cases where modem could be handled by multiple dialer instances;
- fixed modem firmware upgrade for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed possible crash when enabling/disabling config-less modem interface;
- fixed R11e-LTE no traffic flow when modem with older firmware version is used;
- fixed support for Fibocom modem fm150-na;
- improved modem AT/modem port open;
- improvements to "/interface/lte/show-capabilities" command;
- fixed possible crash when enabling/disabling config-less modem interface;
- fixed R11e-LTE no traffic flow when modem with older firmware version is used;
- fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed cases where modem could be handled by multiple dialer instances;
- added "at-chat" support for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
- added support for concatenated AT commands in "modem-init" string;
- added support to set "modem-init" string for "dialer-less" modems;
- apply the same configuration for Microsoft branded EM12-G modem (Surface Mobile Broadband) as for Quectel EM12-G;
- do not show persistent interfaces for multi-apn slave interfaces;
- dropped support for R11e-LTE-US FOTA firmware update;
- fixed R11e-LTE-US modem dial-up;
- fixed situation where link is not restored after Quectel MBIM modem firmware update;
- improved FG621-EA modem APN authentication;
- make interface persistent (unused interface configs can be removed, allow to export and examine current configuration without the device present);
- removed 2 APN restriction for RG520F-EU modem;
- use the correct network interface for multi-interface LTE modems;
- fixed firmware upgrade not found issue for Chateau LTE12 (introduced in v7.14.1);
- fixed R11e-LTE-US modem dial-up;
- added "at-chat" support for Sierra Wireless EM9293 5G modem;
- added AT channel support for Quectel EM120K-GL modem;
- added redial timer when the MBIM modem fails to register or does not receive APN activation notification;
- don't duplicate primary band in 5G SA mode for chateau 5G;
- fixed "use-peer-dns" setting for EC200A modem;
- fixed an issue for EC200A modem that IPv6 address could be added as IPv4 address;
- fixed APN authentication for FG621-EA modem;
- fixed MBIM interface enabling for Quectel EC25 modem (introduced in v7.13);
- fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions;
- fixed Simcom modem support in 0x9001 USB composition;
- fixed support for config-less modem detection (introduced in v7.13);
- fixed USB mode switch and initialization race condition for configless USB modems;
- improved FG621-EA modem firmware upgrade;
- improved modem recovery after failed IPv4 configuration;
- improved support for "ACER" and "MSFT" branded EM12-G modems;
- optimized "at-chat" response reading;
- refactored AT command control for AT modems;
- fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions (introduced in v7.13);