Component: lte

7.10beta5 Testing 2023-May-09 (3 years ago)

• added serving cell query for MBIM modems with necessary MBIM extension;
• disable DHCP request filtering (UDP port 67) for Chateau 5G;
• fixed Google Pixel 7 tethering support;
• improved stability for Chateau 5G LTE modem firmware upgrade;
• stop "cell-monitor" on LTE interface configuration change for MBIM modems;

7.9 Stable 2023-May-02 (3 years ago)

• capped maximum lifetime of SLAAC address to 1 hour;
• fixed CA band clearing on RAT mode change;
• fixed duplicate IPv6 route for lte interface when "ipv6-interface" setting is used;
• fixed LTE interface not showing up when resetting RouterOS configuration;
• fixed passthrough mode when used together with another APN for Chateau 5G;
• fixed R11-LTE-US in LTE passthrough mode;
• fixed R11e-LTE-US reporting of RSSI in LTE mode;
• fixed re-attach in some cases where module would stay in not-running state after network detach;
• fixed second modem halt on dual R11e-LTE6 setup;
• improved system stability when changing LTE interface configuration during network scan with MBIM modems (introduced in v7.8);

7.9rc5 Testing 2023-Apr-28 (3 years ago)

• improved system stability when changing LTE interface configuration during network scan with MBIM modems (introduced in v7.8);

7.9beta4 Testing 2023-Mar-23 (3 years ago)

• capped maximum lifetime of SLAAC address to 1 hour;
• fixed CA band clearing on RAT mode change;
• fixed duplicate IPv6 route for lte interface when "ipv6-interface" setting is used;
• fixed LTE interface not showing up when resetting RouterOS configuration;
• fixed passthrough mode when used together with another APN for Chateau 5G;
• fixed R11-LTE-US in LTE passthrough mode;
• fixed R11e-LTE-US reporting of RSSI in LTE mode;
• fixed re-attach in some cases where module would stay in not-running state after network detach;
• fixed second modem halt on dual R11e-LTE6 setup;

7.8 Stable 2023-Feb-24 (3 years ago)

• added AT support for Telit LE910C4 in MBIM mode;
• fixed APN setting usage on initial connection attempt for AT based Quectel and Neoway modems;
• fixed automatic antenna selection on Chateau LTE12/LTE18;
• fixed dialing for Fibocom L850-GL module;
• fixed displaying of "subscriber-number";
• fixed possible memory leak when using passthrough mode on Chateau 5G;
• improved AT port matching for SIMCom, Huawei, WeLink, Cinterion, BandLuxe and Sierra modems;
• improved modem detection speed in lower mini-PCIe slot on LtAP;
• improved stability for R11e-LTE6, skip connection reset on first EEMGINFO command timeout;
• LtAP improved modem detection in lower mini-PCie slot ("/system routerboard upgrade" required);
• parse USSD even if encoding is unsupported;

7.8rc2 Testing 2023-Feb-14 (3 years ago)

• fixed config-less modem support (introduced in 7.8rc1);
• fixed possible memory leak when using passthrough mode on Chateau 5G;

7.8rc1 Testing 2023-Feb-08 (3 years ago)

• improved stability for R11e-LTE6, skip connection reset on first EEMGINFO command timeout;

7.8beta3 Testing 2023-Feb-01 (3 years ago)

• LtAP improved modem detection in lower mini-PCie slot ("/system routerboard upgrade" required);

7.8beta2 Testing 2023-Jan-20 (3 years ago)

• added AT support for Telit LE910C4 in MBIM mode;
• fixed APN setting usage on initial connection attempt for AT based Quectel and Neoway modems;
• fixed automatic antenna selection on Chateau LTE12/LTE18;
• fixed dialing for Fibocom L850-GL module;
• fixed displaying of "subscriber-number";
• improved AT port matching for SIMCom, Huawei, WeLink, Cinterion, BandLuxe and Sierra modems;
• improved modem detection speed in lower mini-PCIe slot on LtAP;
• parse USSD even if encoding is unsupported;

7.7 Stable 2023-Jan-12 (3 years ago)

• added AT channel support for Telit FN990;
• added CA information in 5G mode;
• fixed error handling on opening AT control channel;
• fixed new MTU value validation;
• improved stability when LTE passthrough is enabled on Chateau 5G;
• properly show leading zeros in MCC and MNC strings;
• show band number in "ca-band" in NSA mode on Chateau 5G;
• use RSRP value reported by MBIM signal for MBIM type modems;

7.7rc4 Testing 2023-Jan-03 (3 years ago)

• improved stability when LTE passthrough is enabled on Chateau 5G;

7.7rc1 Testing 2022-Dec-08 (3 years ago)

• properly show leading zeros in MCC and MNC strings;

7.7beta9 Testing 2022-Nov-30 (3 years ago)

• added AT channel support for Telit FN990;

7.7beta8 Testing 2022-Nov-23 (3 years ago)

• fixed error handling on opening AT control channel;
• show band number in "ca-band" in NSA mode on Chateau 5G;

7.7beta3 Testing 2022-Oct-26 (3 years ago)

• added CA information in 5G mode;
• fixed new MTU value validation;
• use RSRP value reported by MBIM signal for MBIM type modems;
• validate bearer count when activating MBIM modem;

7.6 Stable 2022-Oct-17 (3 years ago)

• added interface name in MTU debug logging message;
• added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;
• added support for Neoway N75-EA;
• added support to perform FOTA upgrade from local file for EG12-EA, EG18-EA, RG502Q-AE, EG06-A, EP06-A modems;
• disabled RPLMN on Chateau 5G;
• fixed at-chat on Telit FN980m;
• fixed handover from UMTS to LTE when PS activation had failed for MBIM modems;
• fixed MBIM modem initialization;
• fixed re-attaching on PS detach for MBIM modems;
• removed reconnect delay after receiving DETACH notification for MBIM modems;

7.6rc2 Testing 2022-Oct-11 (3 years ago)

• fixed handover from UMTS to LTE when PS activation had failed for MBIM modems;
• fixed MBIM modem initialization;
• removed reconnect delay after receiving DETACH notification for MBIM modems;

7.6rc1 Testing 2022-Oct-04 (3 years ago)

• added support for Neoway N75-EA;

7.6beta10 Testing 2022-Sep-29 (3 years ago)

• added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;
• added support to perform FOTA upgrade from local file for EG12-EA, EG18-EA, RG502Q-AE, EG06-A, EP06-A modems;
• fixed re-attaching on PS detach for MBIM modems;

7.6beta8 Testing 2022-Sep-21 (3 years ago)

• added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;

7.6beta7 Testing 2022-Sep-16 (3 years ago)

• added interface name in MTU debug logging message;

7.6beta6 Testing 2022-Sep-07 (3 years ago)

• fixed at-chat on Telit FN980m;

7.6beta4 Testing 2022-Sep-01 (3 years ago)

• added interface name for MTU debug logging message;
• added support for Neoway N75-EA;
• disabled RPLMN on Chateau 5G;

7.5 Stable 2022-Aug-30 (3 years ago)

• added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
• added at-chat support for Simcom modems, USB composition (device id - 0x9005);
• added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
• changed cell ID info display to short format for 3G connections;
• disallow empty APN name only for default entry;
• fixed AT channel for Sierra Wireless modems with device ID 0x9091;
• fixed LTE interface presence for Telit LN940;
• fixed UDP performance on MMIPS devices;
• improved antenna scan for Chateau devices with switchable antennas;
• improved configuration export when multiple LTE interfaces are present;
• modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;

7.5rc1 Testing 2022-Aug-19 (3 years ago)

• added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
• added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
• added at-chat support for Simcom modems, USB composition (device id - 0x9005);
• changed cell ID info display to short format for 3G connections;
• disallow empty APN name only for default entry;
• fixed AT channel for Sierra Wireless modems with device ID 0x9091;
• fixed LTE interface presence for Telit LN940;
• fixed UDP performance on MMIPS devices;
• improved antenna scan for Chateau devices with switchable antennas;
• improved configuration export when multiple LTE interfaces are present;
• modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;