Component: lte
1,402 changelog entries across 330 version(s)
Releases by channel (stacked)
- fixed handover from UMTS to LTE when PS activation had failed for MBIM modems;
- fixed MBIM modem initialization;
- removed reconnect delay after receiving DETACH notification for MBIM modems;
- added support for Neoway N75-EA;
- added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;
- added support to perform FOTA upgrade from local file for EG12-EA, EG18-EA, RG502Q-AE, EG06-A, EP06-A modems;
- fixed re-attaching on PS detach for MBIM modems;
- added periodic IPv6 RS to trigger IPv6 adress acquisition for non-MBIM modems;
- added interface name in MTU debug logging message;
- fixed at-chat on Telit FN980m;
- added interface name for MTU debug logging message;
- added support for Neoway N75-EA;
- disabled RPLMN on Chateau 5G;
- added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
- added at-chat support for Simcom modems, USB composition (device id - 0x9005);
- added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
- changed cell ID info display to short format for 3G connections;
- disallow empty APN name only for default entry;
- fixed AT channel for Sierra Wireless modems with device ID 0x9091;
- fixed LTE interface presence for Telit LN940;
- fixed UDP performance on MMIPS devices;
- improved antenna scan for Chateau devices with switchable antennas;
- improved configuration export when multiple LTE interfaces are present;
- modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
- added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
- added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
- added at-chat support for Simcom modems, USB composition (device id - 0x9005);
- changed cell ID info display to short format for 3G connections;
- disallow empty APN name only for default entry;
- fixed AT channel for Sierra Wireless modems with device ID 0x9091;
- fixed LTE interface presence for Telit LN940;
- fixed UDP performance on MMIPS devices;
- improved antenna scan for Chateau devices with switchable antennas;
- improved configuration export when multiple LTE interfaces are present;
- modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
- fixed AT channel for Sierra Wireless modems with device ID 0x9091;
- disallow empty APN name only for default entry;
- fixed UDP performance on MMIPS devices;
- added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
- added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
- added at-chat support for Simcom modems, USB composition (device id - 0x9005);
- changed cell ID info display to short format for 3G connections;
- fixed LTE interface presence for Telit LN940;
- improved antenna scan for Chateau devices with switchable antennas;
- improved configuration export when multiple LTE interfaces are present;
- modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
- added AT chat support for Dell dw5821e modem;
- fixed LTE interface running state after modem reconnection;
- fixed Telit AT interface numbering;
- improved LTE interface detection for LtAP-2HnD devices;
- keep MBIM working even if AT channel fails to respond in the initialization stage;
- request connect with the same IP type as in LTE attach status for MBIM;
- show current value for "antenna" parameter when auto antenna selection fails;
- validate LTE attached IP type in MBIM mode;
- show current value for "antenna" parameter when auto antenna selection fails;
- validate LTE attached IP type in MBIM mode;
- added AT chat support for Dell dw5821e modem;
- fixed LTE interface running state after modem reconnection;
- added SMS sending support for MBIM protocol;
- added support for generic PXA1802 based modems;
- allow only MCC/NMC format in "operator" parameter;
- clear SIM values when modem in "stopped" state;
- disabled extended signal info query for Telit LN940 module;
- disabled wait for LTE auto attach;
- expose diagnostics channel for all modems;
- fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6;
- fixed Sierra MC7455 modem initialization;
- hide slave interfaces from export;
- improved LTE interface initialization process on LtAP-2HnD;
- improved stability when configuring multiple APN's at the same time in MBIM mode;
- improved stability when upgrading LTE firmware on Chateau 5G;
- improved LTE interface initialization process on LtAP-2HnD;
- added SMS sending support for MBIM protocol;
- allow only MCC/NMC format in "operator" parameter;
- clear SIM values when modem in "stopped" state;
- added SMS sending support for MBIM protocol;
- added support for generic PXA1802 based modems;
- disabled wait for LTE auto attach;
- hide slave interfaces from export;
- improved stability when upgrading LTE firmware on Chateau 5G;
- disabled wait for LTE auto attach;
- disabled extended signal info query for Telit LN940 module;
- added MCS, CQI and RI value reporting for Fibocom FG621;
- added SMS sending support for MBIM protocol;
- added support for generic PXA1802 based modems;
- disabled wait for LTE auto attach;
- expose diagnostics channel for all modems;
- fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6;
- fixed Sierra MC7455 modem initialization;
- hide slave interfaces from export;
- improved stability when configuring multiple APN's at the same time in MBIM mode;
- improved stability when upgrading LTE firmware on Chateau 5G;
- add IPv6 address on interface as well;
- added 3 APN profile support and APN name re-using on R11e-LTE6;
- added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
- added basic information support for Telit LM960 and LM940 in MBIM mode;
- added class based support for configless RNDIS LTE modems;
- added support for Uplink CA reporting;
- changed "CS/PS" registration type from "both" to "any" on R11e-LTE un R11e-LTE6;
- do not loose "band" configuration after reboot on Chateau 5G;
- do not show external antenna selector on devices that does not support it;
- enabled multi-APN and name re-use support for Chateau;
- expose diagnostics channel for all modems;
- fixed "monitor" command to not report old info;
- fixed AT command response handling on R11e-LTE;
- fixed IPv6 address addition after startup on R11e-LTE6;
- fixed MBIM modem reset on AT timeout;
- fixed link flapping when loosing cellular signal on R11e-LTE un R11e-LTE6;
- fixed packet forwarding on R11e-4G and R11e-LTE-US;
- fixed possible timeouts when sending SMS in LTE only mode on R11e-LTE;
- fixed support for Sierra MC7710;
- fixed support for Telit 960;
- improved stability on "+EGMR" response in MBIM mode;
- improved stability when modem disappears during firmware upgrade;
- improved support for sending/receiving SMS in LTE only mode on R11e-LTE6;
- made "no" the default value for "use-network-apn" parameter;
- properly recognize MBIM modem in USB port as LTE on Chateau 5G;
- enabled multi-APN and name re-use support for Chateau;
- improved stability when modem disappears during firmware upgrade;