MikroTik Changelogs
← Back to search All versions

Version: 7.26beta3

Development

107 changelog entries across 40 component(s)

2026-Oct-16 (2 weeks ago)

Component Change
apptraffic fix connection tracking not reverting to auto when apptraffic is disabled;
bridge add dhcp-snooping-option82-policy setting for handling packets that already carry option 82;
bridge add topology-change, host-moves and STP timer statistics to monitors;
bridge fix fragmented IPv6 traffic being dropped by DHCPv6 snooping (introduced in v7.23);
bridge fix static host entries being aged out of the hardware table;
bth fix allow-uploads being settable on shares that point to a file;
cmr add low-voltage-pd-detected poe status;
cmr add user attribution to log entries;
cmr allow using the WiFi SSID as an automatic label;
cmr do not create alert conditions when rebooted=no or unpaired-device-connected=no;
cmr fix channel width report for wifi stations;
cmr fix device identity changes not syncing with the server;
cmr fix failed upgrade alerts showing an incorrect version;
cmr fix layout node coordinates displayed incorrectly when negative;
cmr fix manual upgrade to a pinned version;
cmr fix missing application counters in the apptraffic view;
cmr fix missing device export command;
cmr fix pairing password requirement changes not being detected;
cmr fix pairing state after a failed password pairing;
cmr fix setting port-labels for multiple ports from the CLI;
cmr fix the first interface-change alert not firing;
cmr fix upgrade "show-devices" listing non-paired devices;
cmr fix wifi-logs showing entries from unselected devices;
console fix /cmr configuration missing from the export;
console improve stability;
container add label support;
defconf disable FTP and Telnet services;
defconf fix boot device selection after configuration reset with keep-apps=yes;
discovery do not send LLDP power requests before the default configuration is applied;
disk fix all-zero NGUIDs on NVMe over TCP exported namespaces;
disk fix newly formatted Btrfs disks failing to mount (introduced in v7.26beta1);
dot1x fix MACsec not working between ARM and MIPS devices;
dude replace dude 32-bit client with 64-bit version;
ethernet fix broadcast traffic still reaching the CPU when port isolation is used on Atheros and MediaTek switches;
ethernet fix occasional packet loss on hAP be Media;
ethernet fix spurious duplicate MAC address warning on WDS interfaces;
evpn fix MAC-IP route origination and withdrawal (introduced in v7.25);
iot fix LoRa gateway packet validation when transmitting;
ipsec fix IKEv2 EAP-TTLS client failing with invalid trust store (introduced in v7.21);
ipsec fix policies not being loaded after an upgrade (introduced in v7.25);
l3hw add VXLAN offloading to CRS8xx series switches;
l3hw fix hardware offload for active-backup bonds;
l3hw fix hardware offload for VLAN interfaces created directly on Ethernet ports on CRS8xx series switches;
l3hw fix offload issues on ECMP routes with non-offloadable paths;
l3hw fix packet loss when a directly connected host moves from a bond to Ethernet;
l3hw gate L3 hardware offload by the port's L2 hardware offload state;
l3hw stop forwarding packets through an unreachable nexthop;
lcd improve stability when changing the color scheme after touchscreen recalibration;
leds fix Audience front LED when wifi is managed by wifi-qcom-ac;
log fix the default flag not being shown for the default configuration log rules;
lte clear the cached eSIM profile list after a SIM change;
lte fix dialer for D-Link DWM-222W modems (additional fixes);
lte fix iOS tethering not obtaining an IP address;
lte fix linkup only after link-recovery-timer after firmware-upgrade on RG650E-EU modem;
lte fix packet loss with R11e-LTE-US modems (introduced in v7.21);
lte fix QMI modems waiting out the full link-recovery-timer after re-attaching;
lte fix Telit LE910C4-WWX modem not initializing after a cold boot;
lte improve modem firmware-upgrade for EG800K-EU modem;
lte improve stability for devices with QMI modems;
lte keep the "auto" MTU option on LTE interface after reboot (additional fixes);
lte prevent removing an APN profile that is still in use by inactive interfaces;
mpls fix dynamic-label-range rejecting a valid 1024-label range;
netinstall add force stop for in-progress installations;
netwatch improve stability when deleting https-get probes;
poe-out fix export not showing the configuration under the poe submenu;
poe-out fix poe-in voltage monitoring and LLDP power requests on hEX S (2025) devices;
routing-filter fix any-regexp community matcher matching an empty community attribute;
routing-filter fix community delete, filter and modify with regexp-only community lists;
sfp fix host link breaking on S+RJ10 modules when changing advertised modes;
sfp improve link stability for QSFP28 breakout ports to prevent interface lane flapping when one lane goes offline;
sniffer fix long-running captures failing after approximately 4.3 billion packets;
snmp add ospfAdminStat and ospfRouterId to the OSPF MIB;
ssh fix a failed command returning a successful exit status;
switch fix egress rate limiting with jumbo frames on Marvell Prestera switches;
switch fix link flapping on QSFP cage ports when connecting to NVIDIA DGX Spark;
switch fix VLAN-tagged traffic being looped back in MLAG setups on CRS8xx series switches;
switch improve SFP/QSFP auto-negotiation on CRS8xx series switches;
system fix interface statistics for third-party monitoring tools;
system improve stability;
tls add Renegotiation Indication Extension support;
traffic-flow add post-NAT IPv6 addresses to NetFlow records;
traffic-flow fix CPU usage being classified as networking in the profiler;
webfig add on-demand loading of directory contents in the Files menu;
webfig fix static IPv6 addresses showing wrong lifetime values;
webfig improve network topology view performance;
wifi add station-bridge and station-pseudobridge mode support for MLO stations;
wifi fix client isolation assigned via RADIUS being lost after roaming;
wifi improve stability when disabling an AP with multiple connected stations;
wifi initial MLO station mode support on 802.11be devices;
wifi make station interfaces compatible with access points that do not retransmit EAPoL message 1;
wifi-mediatek fix roaming between APs belonging to the same MLO group;
wifi-mediatek improve stability when MLO stations connect;
wifi-mediatek update radio regulatory information;
wifi-mediatek update the wireless driver and firmware (additional fixes);
wifi-qcom-ac fix traffic being sent to the wrong station after a station-bridge roams between APs;
winbox add a comment field to the DNS adlist window;
winbox add the default-country parameter to wifi radio settings;
winbox add wpa3-psk-gd to wifi security profile authentication types;
winbox add ZeroTier controller, member and peer hint settings;
winbox allow adding LTE interfaces with a master interface and APN profile;
winbox display the "forced-on-bt" PoE-out mode set from the CLI;
winbox fix bridge filter window disabling valid fields for IPv6 rules;
winbox fix wifi radio band selection not being available in radio settings;
winbox hide ACL rule counter tools and graphs on non-Prestera switches;
winbox rename last-member-interval to last-member-query-interval;
wireguard ignore disabled peers when checking for duplicate Allowed Addresses;
www fix REST API login for users with rest-api policy, but without api policy;