Component: lte
631 changelog entries across 113 version(s)
Releases by channel (stacked)
- added support for more ZTE MF90 modems;
- fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
- fixed LTE registration in 2G/3G mode;
- fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
- added additional D-Link PIDs;
- added additional ID support for SIM7600 modem;
- added additional low endpoint SIM7600 PIDs;
- added eNB ID to info command;
- added extended LTE signal info for SIM7600 modules;
- added extended signal information for Quectel LTE EC25 and EP06 modem;
- added ICCID reading for info command R11e-LTE and R11e-LTE-US;
- added "registration-status" parameter under "/interface lte info" command;
- added roaming status reading for info command;
- added "sector-id" to info command;
- added support for alternative SIM7600 PID;
- added support for Novatel USB730LN modem with new ID;
- added support for Quanta 1k6e modem;
- allow to execute concurrent internal AT commands;
- allow to use multiple PLS modems at the same time;
- do not allow to remove default APN profile;
- do not allow to send "at-chat" commands for configless modems;
- expose GPS channel for PLS modems;
- fixed LTE registration in 2G/3G mode;
- fixed SIM7600 registration info;
- fixed SIM7600 series module support with newer device IDs;
- ignore empty MAC addresses during Passthrough discovery phase;
- improved modem event processing;
- improved r11e-LTE and r11e-LTE-US dialling process;
- improved r11e-LTE configuration exchange process;
- improved reading of SMS message after entering running state;
- improved readings of info command results for the SXT LTE;
- improved stability of USB LTE interface detection process;
- properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
- renamed LTE scan tool field "scan-code" to "mcc-mnc";
- show UICC in correct format for SXT LTE devices;
- use "/32" address for the Passthrough feature when R11e-LTE module is used;
- use alphanumeric operator format in info command;
- added signal readings under "/interface lte scan" for 3G and GSM modes;
- fixed memory leak on USB disconnect;
- fixed SMS send feature when not in LTE network;
- fixed automatic LTE band selection for R11e-LTE;
- improved LTE communication process on MMIPS platform devices;
- allow to send "at-chat" command over disabled LTE interface;
- added initial support for Quectel LTE EP06-E;
- added initial support for SIM7600 LTE modem interface;
- added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
- do not add DHCP client on LTE modems that doesn't use DHCP;
- fixed DHCP client adding for MF823 modem;
- fixed LTE band setting for SXT LTE;
- fixed r11-LTE-US interface initialization process after reboot;
- added "/interface lte apn" menu (Passthrough requires reconfiguration);
- added Passthrough support;
- added Yota non-configurable modem support;
- added support for ZTE ME3630 E1C with additional "/port" for GPS usage;
- automatically add "/ip dhcp-client" configuration on interface;
- changed default values to "add-default-route=yes", "use-peer-dns=yes" and "default-route-distance=2";
- fixed Passthrough support;
- fixed authentication for non LTE modes;
- fixed error when trying to add APN profile without name;
- fixed rare crash when initializing LTE modem after reset;
- fixed user authentication for R11e-LTE when new firmware is used;
- integrated IP address acquisition without DHCP client for wAP LTE kit-US;
- limited minimal default route distance to 1;
- update info command with "location area code" and "physical cell id" values;
- do not reset modem when it is not possible to access SMS storage;
- fixed modem initialization after reboot;
- fixed PIN option after setting up the band;
- fixed modem initialization after reboot;
- do not show USB LTE modem under "/port" menu;
- fixed ethernet flap when LTE establishes connection;
- fixed SXT LTE graphs in QuickSet;
- improved reliability of USB LTE modems;
- fixed LTE not passing any traffic while in running state;
- improved info channel background polling;
- improved relialibility on SXT LTE;
- replaced "user-command" with "at-chat" command;
- added "session-uptime" in info command;
- added LTE signal level reading for Cinterion modems;
- added error handling for remote AT execute;
- added initial support for DWR-910 modem;
- added initial support for Quectel ec25;
- added initialization for Cinterion;
- added log entry for SMS delivery report;
- added support for Vodafone R216 (Huawei);
- buffer AT events while info command is active;
- fixed "/interface lte info X once";
- fixed IPv6 address prefix on interface
- fixed network mode selection for me909u, mu609;
- fixed older standard CEREG parsing;
- fixed support for Huawai R216;
- fixed user-command;
- reset interface stats on "link-down";
- increased delay when setting sms send mode;
- added support for more Vodafone K4201-Z, Novatel USB620L, PANTECH UML295 and ZTE MF90 modems;
- allow to execute concurrent info commands;
- fixed dwm-222, Pantech UML296 support;
- fixed init delay after power reset;
- increased delay when setting sms send mode;
- return info data when all the fields are populated;
- added ability to send/receive sms using '/tool sms';
- added dlink dwm-157 D, dwm-222 support;
- added huawei me909s variant;
- added initial deregistration only for bandrich modems;
- added logging for usb config switching;
- added Pantech UML295, Vodafone K4201-Z, ZTE MF823/MF831 support;
- added rndis for ZTE MF8xx;
- added support for more dlink dwm-222 configurations;
- added switch for Huawei K5160;
- added zte K5008-Z back;
- adjusted usb config for dlink dwm-157 D;
- fixed at chat condition storage;
- fixed band setting for sxt lte;
- fixed band unsetting;
- fixed default channels for dlink dwm-157;
- fixed ip activation when CREG (circuit switched) state remains in not registered state;
- fixed setting correct lte band for sxt lte;
- process initial state change to deregistred, when lockup occurs;
- reset if sms storage set fails;
- fixed access technology update;
- added allow-roaming option for Huawei MU709, ME909s devices;
- added cinterion pls8 support;
- added support for Huawei E3531;
- added support for ZTE ZM8620;
- added use-peer-dns option (will work only combined with add-default-route);
- changed driver loading for class 2 usb rndis devices;
- display message in lte,error log if no response received;
- display message in lte,error log when PIN is required;
- fix crash on SXT LTE while resetting card while at high traffic;
- fixed access technology logging;
- fixed connection for Huawei without cell info;
- fixed modem init when pin request present;
- fixed modem network configuration version checks;
- fixed network-mode support after downgrade;
- Huawei MU609 must use latest firmware to work correctly;
- improved multiple same model modems identification;
- show uicc for Huawei modems;
- use only creg result codes as network status indications;
- use only creg result codes as network status indications;
- do not allow to set multiple modes when it is not supported;
- do not allow to set multiple modes when it is not supported;
- fixed address acquisition on Huaweii LTE interfaces;