MikroTik Changelogs
← Back to search All components

Component: lte

1,291 changelog entries across 312 version(s)

Releases by channel (stacked)

7.21beta4 Testing 2025-Oct-28 (6 months ago)
  • fixed LED behavior for Chateau 5G R17 ax;
  • fixed MTU inheritance from master interface in multi-APN setups;
7.20.3 Stable 2025-Oct-28 (6 months ago)
  • fixed LED behavior for Chateau 5G R17 ax;
7.21beta3 Testing 2025-Oct-14 (6 months ago)
  • added confirmation prompt when deleting eSIM profile;
7.20.1 Stable 2025-Oct-10 (6 months ago)
  • fixed issue with firmware update for FG621-EA modem;
7.21beta2 Testing 2025-Oct-06 (6 months ago)
  • added "force-delete" command to allow deletion of active eSIM profiles;
  • added additional logging for error reported by modem during APN profile setup;
  • added command to send out EUICC generated notifications manually;
  • added confirmation prompt when deleting eSIM profile (CLI only);
  • added support for additional D-Link DWM-222 variation (vendor-id="0x2001" device-id="0x7e46");
  • added support for additional Huawei E3372-325 variation (vendor-id="0x3566" device-id="0x2001");
  • added support for R11e-LTE6 v039 firmware release and availability notification;
  • ask for user confirmation before installing eSIM profile (CLI only);
  • clear SIM not present error when performing modem FW upgrade;
  • discontinued support for RBSXTLTE3-7, further versions will use v7.20 LTE firmware package;
  • fixed cases where LTE monitor could show abnormalities;
  • fixed issue with firmware update for FG621-EA modem;
  • force sms-protocol to AT for FG621-EA modem;
  • improved AT modems at-chat control channel handling after modem has closed AT channel unexpectedly;
  • improved modem recovery for Chateau 5G and Chateau 5G R16;
  • improved stability for FG621-EA modem;
  • improved system stability when receiving SMS messages;
  • relay EUICC generated notifications after profile enable/disable/remove/provision;
  • rework multiapn support for AT modems;
  • unify "SIM not present" status for all modems;
7.20 Stable 2025-Sep-29 (7 months ago)
  • use modem-supplied IPv6 address over EUI-64 when available;
  • added "done" status for modem firmware-upgrade version check;
  • added "remove-sent-sms-after-send" option to automatically delete sent SMS messages;
  • added log entry if eSIM has no profiles on read;
  • added modem-init string response to system log;
  • added passthrough support for RG650E-EU modem;
  • added show-capabilities eSIM presence detection for MBIM modems;
  • allow only one IPv6 APN for AT modems;
  • display ICCID regardless of SIM PIN entry status;
  • do not reconfigure modem if deactive eSIM profile is deleted;
  • exempt eSIM provision from global CRL certificate settings;
  • exit LTE scan if modem reconfigured;
  • fallback to RA for global IPv6 if unattained via AT channel (resets on config change);
  • fixed inappropriate LTE interface inactive flag shown during modem initialization;
  • fixed modem recovery on unexpected modem reboot for Chateau 5G and Chateau 5G R16;
  • fixed progress message for R11e-LTE modem firmware-upgrade;
  • fixed rare case where AT dialer could stop;
  • improved EC200A-EU firmware-upgrade stability;
  • improved SMS sending stability over MBIM protocol;
  • refresh eSIM profile list after successful provision;
  • renamed "uicc" to "iccid" in LTE monitor and eSIM profile print;
  • show ip-type in /interface/lte/apn/print;
7.20rc4 Testing 2025-Sep-23 (7 months ago)
  • added passthrough support for RG650E-EU modem;
7.19.6 Stable 2025-Sep-12 (7 months ago)
  • fixed wrong subnet mask set to Chateau 5G R17 ax LTE interface;
7.20rc2 Testing 2025-Sep-11 (7 months ago)
  • fixed modem recovery on unexpected modem reboot for Chateau 5G and Chateau 5G R16 (additional fixes);
7.20rc1 Testing 2025-Aug-28 (8 months ago)
  • fixed wrong subnet mask set to Chateau 5G R17 ax LTE interface;
7.20beta5 Testing 2025-Jul-03 (9 months ago)
  • AT modems, fixed typos in commands sent to modem when APN with authentication is used (AT+CGAUTH; AT$QCPDPP);
  • do not reconfigure modem if deactive eSIM profile is deleted;
  • exempt eSIM provision from global CRL certificate settings;
  • R11e-LTE and R11e-LTE6, fixed possible crash on device unexpected removal or during RouterOS shutdown;
7.19.3 Stable 2025-Jul-03 (9 months ago)
  • AT modems, fixed typos in commands sent to modem when APN with authentication is used (AT+CGAUTH; AT$QCPDPP);
  • R11e-LTE and R11e-LTE6, fixed possible crash on device unexpected removal or during RouterOS shutdown;
7.19.2 Stable 2025-Jun-20 (10 months ago)
  • added support for R11e-LTE6 v039 firmware release;
  • do not dial further if modem detects eSIM without profiles;
  • fixed eSIM management function for mmips and mipsbe architecture CPUs;
  • fixed eSIM provisioning for servers that do not send content-length in the HTTP response;
7.20beta4 Testing 2025-Jun-13 (10 months ago)
  • added "remove-sent-sms-after-send" option to automatically delete sent SMS messages;
  • added modem-init string response to system log;
  • added show-capabilities eSIM presence detection for MBIM modems;
  • added support for R11e-LTE6 v039 firmware release;
  • do not dial further if modem detects eSIM without profiles;
  • exit LTE scan if modem reconfigured;
  • fallback to RA for global IPv6 if unattained via AT channel (resets on config change);
  • fixed eSIM management function for mmips and mipsbe architecture CPUs;
  • fixed eSIM provisioning for servers that do not send content-length in the HTTP response;
  • fixed inappropriate LTE interface inactive flag shown during modem initialization;
  • fixed progress message for R11e-LTE modem firmware-upgrade;
  • improved EC200A-EU firmware-upgrade stability;
  • improved SMS sending stability over MBIM protocol;
7.20beta2 Testing 2025-May-27 (11 months ago)
  • added "done" status for modem firmware-upgrade version check;
  • added log entry if eSIM has no profiles on read;
  • allow only one IPv6 APN for AT modems;
  • display ICCID regardless of SIM PIN entry status;
  • fixed modem recovery for unexpected modem reboot for Chateau 5G and Chateau 5G R16;
  • fixed rare case where AT dialer could stop;
  • refresh eSIM profile list after successful provision;
  • renamed "uicc" to "iccid" in LTE monitor and eSIM profile print;
  • show ip-type in /interface/lte/apn/print;
  • use modem-supplied IPv6 address over EUI-64 when available;
7.19 Stable 2025-May-22 (11 months ago)
  • added UICC parameter in LTE monitor for R11e-4G modem;
  • additional fixes for eSIM management support;
  • AT modems, improved redialing when modem lost connectivity without notifying host about APN status change;
  • automatically enable roaming for known roaming only SIM/eSIM profiles;
  • Chateau 5G R16 fix DHCP relay packet forwarding using LTE interface;
  • deactivate current eSIM profile before activating new profile;
  • fixed default APN for configless modems;
  • fixed EC200A-EU APN authentication;
  • fixed initialization for Neoway N75 modem;
  • fixed initialization for R11e-LTE6 modem;
  • fixed LTE passthrough activation issue when IPv6 APN is used;
  • fixed LTE status update or possible crash when modem is unexpectedly removed from system;
  • fixed MBIM modem recovery after modem unexpected restart;
  • fixed modem recovery after firmware upgrade for R11e-LTE modem;
  • fixed possible crash or missing IPv6 address on first APN activation when IPv6 capable APN is used;
  • fixed Router Advertisement processing issue for AT modems when an APN with "ip-type=ipv6" was configured;
  • improved dialer for EC200A-EU modem;
  • improved R11e-LTE6 link recovery delay time after unexpected modem registration status changes;
  • initial support for user settable modem redial timer;
  • initialize Quectel modems as soon as they are ready after unexpected restart;
  • reset internal link-recovery-timer on sim slot change;
  • set apn profile name the same as apn if no name specified when creating the profile;
  • show correct value for 5G SA "current-cellid";
7.19rc3 Testing 2025-May-20 (11 months ago)
  • fixed modem firmware upgrade process for Chateau 5G un Chateau 5G R16 (introduced in v7.19beta8);
  • improved R11e-LTE6 link recovery delay time after unexpected modem registration status changes;
7.19rc2 Testing 2025-May-07 (11 months ago)
  • deactivate current eSIM profile before activating new profile;
  • fixed default APN for configless modems;
7.19rc1 Testing 2025-Apr-28 (1 year ago)
  • automatically enable roaming for known roaming only SIM/eSIM profiles;
  • fixed EC200A-EU APN authentication;
  • fixed LTE passthrough activation issue when IPv6 APN is used;
  • fixed MBIM modem recovery after modem unexpected restart;
  • fixed possible crash or missing IPv6 address on first APN activation when IPv6 capable APN is used;
  • initialize Quectel modems as soon as they are ready after unexpected restart;
  • show correct value for 5G SA "current-cellid";
7.19beta8 Testing 2025-Apr-04 (1 year ago)
  • fixed LTE status update or possible crash when modem is unexpectedly removed from system;
7.19beta7 Testing 2025-Mar-31 (1 year ago)
  • fixed initialization for R11e-LTE6 modem;
  • fixed initialization for Neoway N75 modem;
  • reset internal link-recovery-timer on sim slot change;
7.19beta6 Testing 2025-Mar-19 (1 year ago)
  • Chateau 5G R16 fix DHCP relay packet forwarding using LTE interface;
7.18.2 Stable 2025-Mar-11 (1 year ago)
  • additional fixes for eSIM management support;
  • AT modems, improved redialing when modem lost connectivity without notifying host about APN status change;
7.19beta4 Testing 2025-Mar-06 (1 year ago)
  • additional fixes for eSIM management support;
  • AT modems, improved redialing when modem lost connectivity without notifying host about APN status change;
  • initial support for user settable modem redial timer;
7.19beta2 Testing 2025-Feb-28 (1 year ago)
  • added UICC parameter in LTE monitor for R11e-4G modem;
  • fixed modem recovery after firmware upgrade for R11e-LTE modem;
  • fixed Router Advertisement processing issue for AT modems when an APN with "ip-type=ipv6" was configured;
  • improved dialer for EC200A-EU modem;
  • set apn profile name the same as apn if no name specified when creating the profile;