Version: 7.24rc1

Testing

22 changelog entries across 11 component(s)

2026-Jul-01 (1 month ago)

Component	Change
bridge	fixed forwarding through peer-port after disabling MLAG;
bridge	fixed stability issue when using DHCPv4 snooping;
bridge	improved STP, BPDU and topology change handling with MLAG, ensure dual-connected port STP state is in sync with MLAG peer;
console	added comparison operators for array type (additional fixes);
console	improved script handling and error logging when running scripts from external sources (e.g. DHCP, SNMP, Netwatch, etc.) (additional fixes);
dhcpv4-server	set "ciaddr" in forcerenew messages so a relay, if used, can unicast such messages;
discovery	added "dying-gasp" feature for LLDP, MNDP, CDP that sends packet with "TTL=0" before graceful reboot/shutdown/upgrade;
discovery	clear neighbor entry when receiving "dying-gasp" packet;
l3hw	added HW offloaded VRF support on 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98CX8410 switches (additional fixes);
l3hw	allow VLAN tagged traffic inside VXLAN tunnel;
l3hw	fixed VTEP offload on IPv4 /32 route changes;
lte	added force-confirmation parameter for eSIM provision command;
lte	do not query 5G neighbor cell info until RG650E-EU FW fixed;
lte	fixed cases where R11l-LTE7 modem would not display correct cell info after handover;
netinstall	added Netinstall package (additional fixes);
ospf	fixed stability issue during interface flaps;
ppp	get IPv6 configuration via RA for modems using PPP emulation mode;
ppp	toggle radio state on interface disable/enable;
ppp	added iccid field to ppp info command for BG77 and BG770 modems;
ppp	always show current FW version when running firmware-upgrade;
wifi-mediatek	improved stability during MLO channel switching;
winbox	do not pre-fill "Allowed Address" and "Client Allowed Address" with "::/0" when adding new WireGuard Peer;