Component: lte
1,291 changelog entries across 312 version(s)
Releases by channel (stacked)
- fixed modem recovery after firmware upgrade for R11e-LTE modem;
- fixed Router Advertisement processing issue for AT modems when an APN with "ip-type=ipv6" was configured;
- added at-chat support for EC21EU;
- added basic support for Quectel RG255C-GL modem in "at+qcfg="usbnet",0" USB composition;
- added confirmation-code parameter for eSIM provisioning;
- added initial eSIM management support;
- fixed cases where the MBIM dialer could get stuck;
- fixed Huawei ME909s-120 support;
- fixed interface recovery in mixed multiapn setup for MBIM modems;
- fixed missing 5G info for "/interface lte print" command;
- fixed missing IPv6 prefix advertisement on renamed LTE interfaces;
- fixed prolonged reboots on Chateau 5G ax;
- fixed SIM slot initialization with multi-APN setups;
- improved automatic link recovery and modem redial functions;
- improved initialization for external USB modems;
- lte monitor, show CQI when modem reports it as 0 - undetectable, no RX/down-link resource block assigned to modem by provider;
- R11eL-EC200A-EU fixed online firmware upgrade and added support for firmware update from local file;
- R11eL-EC200A-EU improved failed connection handling and recovery;
- reduce modem initialization time for R11e-LTE-US;
- reduced SIM slot switchover time for modems with AT control channel (except R11e-LTE);
- removed nonexistent CQI reading for EC200A-EU modem;
- added initial eSIM management support (additional fixes);
- fix R11e-4G modem initialization (introduced in v7.18beta4);
- fixed cases where the MBIM dialer could get stuck;
- fixed interface recovery in mixed multiapn setup for MBIM modems (additional fixes);
- improved initialization for external USB modems;
- fixed interface recovery in mixed multiapn setup for MBIM modems;
- improved automatic link recovery and modem redial functions;
- reduce modem initialization time for R11e-LTE-US;
- reduced SIM slot switchover time for modems with AT control channel (except R11e-LTE) (additional fixes);
- added at-chat support for EC21EU;
- added confirmation-code parameter for eSIM provisioning;
- added initial eSIM management support (additional fixes);
- fixed R11eL-EC200A-EU modem RAT mode selection (introduced in v7.18beta2);
- added basic support for Quectel RG255C-GL modem in "at+qcfg="usbnet",0" USB composition;
- added initial eSIM management support (CLI only) (additional fixes);
- reduced SIM slot switchover time for modems with AT control channel;
- added initial eSIM management support (CLI only);
- fixed Huawei ME909s-120 support;
- fixed missing 5G info for "/interface lte print" command;
- fixed missing IPv6 prefix advertisement on renamed LTE interfaces;
- fixed prolonged reboots on Chateau 5G ax;
- fixed SIM slot initialization with multi-APN setups;
- lte monitor, show CQI when modem reports it as 0 - undetectable, no RX/down-link resource block assigned to modem by provider;
- R11eL-EC200A-EU fixed online firmware upgrade and added support for firmware update from local file;
- R11eL-EC200A-EU improved failed connection handling and recovery;
- removed nonexistent CQI reading for EC200A-EU modem;
- added option to check/install modem firmware from early-access/testing channel (CLI only);
- added provider specific firmware update (FOTA) for Cosmote GR networks on Chateau 5G;
- disabled ims service for Chateau 5G on operator "3 AT" network (PLMN ID 23205);
- drop operator selection support for R11e-4G modem as it is unreliable;
- fixed "default-name" property in export when multiple LTE interfaces are used;
- fixed "lte monitor" signal reporting for RG520F-EU modem when connected to 5G SA network;
- fixed "operator" setting for EC200A-EU modem;
- fixed long "PLMN search in progress" for SXT 3-7;
- fixed LTE band setting for SXT LTE 3-7;
- fixed roaming barring (allow-roaming=no) for EC200A-EU modem;
- fixed signal info reporting for FG621-EA modem in UMTS network;
- fixed SMS sender parsing;
- improved modem FW upgrade for Chateau 5G;
- improved R11eL-EC200A-EU modem firmware upgrade procedure;
- improved recovery after unexpected modem reboot for Chateau's 5G and 5G R16 series devices;
- improvements to modem "firmware-upgrade" command;
- MBIM increased assignable APN profile count up to 8 then modem firmware allows it;
- modem firmware update (FOTA), added support to install provider specific version;
- removed trailing "F" symbol from uicc;
- set "sms-read=no" and "sms-protocol=auto" as default values;
- set IPv6 address reporting format in modem init for AT modems and MBIM modems with AT channel;
- improved recovery after unexpected modem reboot for Chateau's 5G and 5G R16 series devices (additional fixes);
- improved recovery after unexpected modem reboot for Chateau's 5G and 5G R16 series devices;
- disabled ims service for Chateau 5G on operator "3 AT" network (PLMN ID 23205);
- drop operator selection support for R11e-4G modem as it is unreliable;
- fixed network registration for R11e-4G modem (introduced in v7.17beta2);
- fixed SMS sender parsing;
- improved R11eL-EC200A-EU modem firmware upgrade procedure;
- improvements to modem "firmware-upgrade" command (additional fixes);
- MBIM increased assignable APN profile count up to 8 then modem firmware allows it;
- modem firmware update (FOTA), added support to install provider specific version (additional fixes);
- set "sms-read=no" and "sms-protocol=auto" as default values;
- fixed "default-name" property in export when multiple LTE interfaces are used;
- fixed "lte monitor" signal reporting for RG520F-EU modem when connected to 5G SA network;
- fixed "operator" setting for EC200A-EU modem;
- fixed LTE band setting for SXT LTE 3-7;
- fixed roaming barring (allow-roaming=no) for EC200A-EU modem;
- set IPv6 address reporting format in modem init for AT modems and MBIM modems with AT channel;
- added option to check/install modem firmware from early-access/testing channel (CLI only);
- added provider specific firmware update (FOTA) for Cosmote GR networks on Chateau 5G;
- fixed long "PLMN search in progress" for SXT 3-7;
- fixed signal info reporting for FG621-EA modem in UMTS network;
- improved modem FW upgrade for Chateau 5G;
- improvements to modem "firmware-upgrade" command;
- modem firmware update (FOTA), added support to install provider specific version;
- removed trailing "F" symbol from uicc;
- added "sms-protocol" setting in "/interface lte" menu (CLI only);
- fixed "at-chat" for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
- fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed cases where modem could be handled by multiple dialer instances;
- fixed modem firmware upgrade for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed possible crash when enabling/disabling config-less modem interface;
- fixed R11e-LTE no traffic flow when modem with older firmware version is used;
- fixed support for Fibocom modem fm150-na;
- improved modem AT/modem port open;
- improvements to "/interface/lte/show-capabilities" command;
- fixed R11e-LTE no traffic flow when modem with older firmware version is used (additional fixes);
- improved modem AT/modem port open (additional fixes);
- improvements to "/interface/lte/show-capabilities" command (additional fixes);
- fixed cases where "at-chat" would become unavailable after modem hung up port (introduced in v7.16beta1);
- fixed signal info for R11e-LTE6 modem (introduced in v7.16beta1);
- fixed possible crash when enabling/disabling config-less modem interface;
- improved modem AT/modem port open;
- improvements to "/interface/lte/show-capabilities" command (additional fixes);
- fixed possible crash when enabling/disabling config-less modem interface;
- fixed R11e-LTE no traffic flow when modem with older firmware version is used;
- fixed R11e-LTE no traffic flow when modem with old firmware is used;
- fixed modem dialer disable for Chateau 5G devices when cellular modem support mode set to serial (introduced in v7.16beta2);
- improved system stability for MBIM modem during AT query (introduced in v7.16beta1);
- fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed MBIM modem registration on the network (introduced in v7.16beta1);
- fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
- fixed cases where modem could be handled by multiple dialer instances;
- added "sms-protocol" setting in "/interface lte" menu (CLI only);
- fixed "at-chat" for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
- fixed cases where modem could be handled by multiple dialer instances;
- fixed support for Fibocom modem fm150-na;
- improvements to "/interface/lte/show-capabilities" command;
- added "at-chat" support for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
- added support for concatenated AT commands in "modem-init" string;
- added support to set "modem-init" string for "dialer-less" modems;
- apply the same configuration for Microsoft branded EM12-G modem (Surface Mobile Broadband) as for Quectel EM12-G;
- do not show persistent interfaces for multi-apn slave interfaces;
- dropped support for R11e-LTE-US FOTA firmware update;
- fixed R11e-LTE-US modem dial-up;
- fixed situation where link is not restored after Quectel MBIM modem firmware update;
- improved FG621-EA modem APN authentication;
- make interface persistent (unused interface configs can be removed, allow to export and examine current configuration without the device present);
- removed 2 APN restriction for RG520F-EU modem;
- use the correct network interface for multi-interface LTE modems;