MikroTik Changelogs
← Back to search All versions

Version: 7.26beta1

Development

58 changelog entries across 30 component(s)

2026-Oct-01 (4 weeks ago)

Component Change
bridge add a per-VLAN DHCP snooping option;
bridge fix loop-protect not working when a VLAN interface is added to the bridge;
bridge show if bridge port is blocked by dot1x;
bridge store hw option for disabled bridge ports;
cmr add initial implementation of centralised platform for RouterOS devices, allowing updates, monitoring, alerts and other options;
console improve stability;
container add /app menu to ARM32 devices;
crypto improve ECDSA and EdDSA key and signature validation;
dhcpv4-client improve stability when the interface is deactivated while the client broadcasts a DHCP release;
dhcpv6-server add a dns-none option to not include DNS options in responses;
dhcpv6-server fix a DHCPv6 server failure when the RADIUS reply contains an empty delegated IPv6 prefix;
dns improve service stability on HTTP/2 DoH connections;
ethernet improve stability on devices with Intel I226-V network controllers;
ethernet move the port bandwidth setting to the switch port menu;
files improve stability when moving directories to external storage;
interface show if interface is blocked by stp or dot1x;
ipsec fix IPsec tunnels failing after migration from the old QKD settings;
ipsec fix IPsec tunnels not establishing when an address my-id is configured on the responder;
l3hw add VRRP hardware offloading support;
log add the container name to CEF logs;
lte do not reconfigure if not RouterOS activated CID is deactivated for R11l-LTE7 modem;
lte fix dialer for D-Link DWM-222W modems;
lte fix IPv6 route not being added on modems that do not report a gateway via control interface;
lte fix modem firmware-upgrade failing when SMS polling is enabled;
lte fix multi-APN passthrough stopping when one APN fails to connect;
lte fix multi-APN passthrough stopping when one passthrough-interface VLAN is down on the CPE in multi passthrough interface setup;
lte fix passthrough cleanup when the lte link goes down for QMI modems;
lte fix recurring LTE disconnects R11e-LTE-US modem and some Sierra modems;
lte keep the "auto" MTU option on LTE interface after reboot;
lte reworked multi-apn support. Added support for slave APN interface add/remove;
netinstall install the package version of the configured update channel;
ovpn improve stability in UDP Ethernet mode when the TX queue is full;
pim fix a routing process failure when the hello-delay is set to 0;
ptp fix PTP not working on a VLAN-aware bridge when IGMP snooping is enabled;
qos fix per-queue counters after a switch restart (introduced in v7.23);
quickset fix the WAN interface being selected incorrectly;
reverse-proxy fix setting the VRF parameter for reverse-proxy rules via CLI;
switch add interface-list support to port isolation;
switch fix high CPU usage when removing switch VLANs on Atheros-based switch chips;
switch fix switch rules not working on Atheros-based switch chips;
switch fix switch rules port matchers not working on IPv6 traffic on Atheros-based switch chips;
switch fix switch rules with rate limits stopping traffic on CRS3xx devices;
switch improve stability on CRS326-24S+2Q+ devices;
system improve stability;
system stop the flash configuration store from growing on dynamic configuration changes;
webfig add conditional coloring of cells in tables;
wifi add a default-country parameter in radio settings (CLI only);
wifi fix WPA3 SAE authentication issue for ECC group 21 (introduced in 7.24.3);
wifi implement channel.reselect-interval feature for missing drivers;
wifi reuse freed station association IDs;
wifi-mediatek update the wireless driver and firmware;
wifi-qcom fix antenna gain setting not affecting transmit power (introduced in v7.24);
winbox add the interface column to the OSPF neighbor list;
winbox rename "minimum-version" to "minimum-firmware" under "System/RouterBOARD" menu;
winbox show warning messages under "System/Users/SSH Keys" and "System/Users/SSH Private Keys" menu;
wireguard do not show an interface as running when it has no peers;
wireguard fix a client-dns value that could not be removed in WinBox;
wireguard fix a peer that would not work after import when no endpoint address is set;