Version: 7.7beta3
Testing82 changelog entries across 37 component(s)
2022-Oct-26 (3 years ago)
| Component | Change |
|---|---|
| bgp | improved BGP advertisement printing; |
| bonding | properly detect VPLS interface state changes; |
| bridge | added support for static MDB entries; |
| bridge | disallow port-controller while the bridge has MSTP enabled; |
| bridge | fixed "edge=yes" setting for MSTP; |
| bridge | fixed incorrect root port blocking for MSTP; |
| bridge | fixed mst-override port priority for MSTP; |
| bridge | fixed MSTP compatibility with STP; |
| bridge | fixed port priority for STP and RSTP; |
| bridge | fixed RSTP BCP with bridged PPP interfaces; |
| bridge | fixed STP blocking state on port-controller; |
| bridge | improved port-controller system stability; |
| bridge | improved system stability when using MSTP and many VLAN mappings; |
| certificate | improved certificate management, signing and storing processes; |
| container | fixed handling of groups and usernames from Dockerfile; |
| dhcpv6-client | handle receiving of invalid T1 and T2 times; |
| discovery | added "discovered-by" parameter to indicate which protocol discovered the neighbor; |
| discovery | added "mode" parameter for discovery configuration; |
| discovery | fixed neighbor discovery on Mesh interfaces; |
| discovery | report IPv6 LL address if global address does not exist; |
| filesystem | fixed repartition on devices with containers; |
| hotspot | added "install-hotspot-queue" parameter to control dynamic queue creation (CLI only); |
| ike1 | improved expired IPsec-SA processing; |
| interface | improved system stability when handling large packets on CCR2216; |
| ipsec | removed Blowfish and Camellia encryption algorithms for IKE; |
| ipv6 | do not generate LL addresses for VPN interfaces when IPv6 is disabled; |
| ipv6 | do not use invalid/disabled global addresses for IPv6 ND; |
| l2tp | added VRF support for L2TP Ether interfaces; |
| lte | added CA information in 5G mode; |
| lte | fixed new MTU value validation; |
| lte | use RSRP value reported by MBIM signal for MBIM type modems; |
| lte | validate bearer count when activating MBIM modem; |
| macsec | fixed packet duplication on Ethernet interface; |
| macsec | fixed packet transmission using traffic-generator; |
| macsec | fixed packet validation; |
| netwatch | improved "interval" and "packet-interval" coexistence for ICMP type; |
| ntp | log error message when server is unreachable; |
| ospf | fixed simple authentication and checksums for NBMA and PTMP links; |
| ospf | fixed virtual-link address selection for PTP links; |
| ping | fixed ARP ping; |
| port | added serial port support for Telit FB990 modem; |
| port | do not show unusable USB port on hAP ax^2; |
| ppp | changed default lease time of dynamic DHCPv6 server to 1 day; |
| quickset | fixed addition of bridge filter rules in bridged mode; |
| quickset | fixed interface list member table on configuration changes; |
| quickset | update DNS server IP address when changing router's IP address; |
| rb4011 | fixed reporting of current CPU frequency and changed default frequency to "auto"; |
| sfp | allow usage of "10G Base-LR" mode for XS+31LC10D module; |
| snmp | added support for "lldpRemLocalPortNum" OID's; |
| supout | added missing IPv6 firewall sections; |
| supout | added MSTI and mst-override monitor for bridge MSTP; |
| switch | avoid packet corruption in some setups for 98DX3257, 98DX3255, 98DX4310, 98DX8525 and 98PX1012 switches; |
| switch | fixed SFP Tx disable when changing auto-negotiation settings for 98DXxxxx and 98PX1012 switches; |
| switch | improved 10Gbps Ethernet interface stability for 98DX8212 switch; |
| system | allow up to 4GB of RAM allocation per process on x86, ARM64 and TILE; |
| system | improved handling of user policies; |
| tr069-client | updated data model to version 2.15; |
| traffic-flow | fixed sending of sampling interval; |
| tunnels | added VRF support for EoIP, IPIP and GRE tunnels; |
| vxlan | added "local-address" parameter support; |
| vxlan | added VRF support; |
| webfig | fixed displaying of VRF routes; |
| webfig | fixed input validation for "VPLS ID" parameter; |
| webfig | fixed setting of "DHCP Option Set" parameter; |
| wifiwave2 | added "datapath" settings to configure data forwarding for an interface (CLI only); |
| wifiwave2 | added disable/enable commands to configuration profile sub-menus (CLI only); |
| wifiwave2 | added interworking/Hotspot 2.0 support (CLI only); |
| wifiwave2 | added more informative log messages on configuration profile changes; |
| wifiwave2 | added option to set per-client vlan-id in access list (only supported on 802.11ax interfaces) (CLI only); |
| wifiwave2 | added "provisioning" menu to automatically assign interface configurations to radios (CLI only); |
| wifiwave2 | do not permit a client device to be connected to more than one interface at a time; |
| wifiwave2 | removed maximum limit for group key update interval and changed the default to 1 day; |
| winbox | added "Active" prefix for current "Circuit ID" and "Cookie Length" fields for L2TP-Ether interfaces; |
| winbox | added "Make Static" button to "IP/DHCP Server/Leases" menu; |
| winbox | fixed minor typo in "Zerotier" menu; |
| winbox | improved handling of large WinBox protocol messages; |
| winbox | properly save "Interfaces/Detect Internet/Detect Internet State" menu in session file; |
| winbox | show "Switch" menu on Chateau 5G ax; |
| winbox | show "System/Health/Settings" only on boards that have configurable values; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| winbox | show "USB Power Reset" menu on Chateau 5G ax; |
| wireless | fixed setting of realms interworking parameter if realms-raw is unset; |