Version: 7.12beta7
Testing74 changelog entries across 35 component(s)
2023-Sep-13 (2 years ago)
| Component | Change |
|---|---|
| api | fixed fetching objects with warning option from REST API; |
| bgp | implemented IGP metric sending in BGP messages; |
| bluetooth | use "g" units when decoding MikroTik beacon acceleration on peripheral devices menu; |
| certificate | allow to remove issued certificates when CRL is not used; |
| certificate | fixed certificate auto renewal via SCEP; |
| chr | iavf updated driver to 4.9.1 version; |
| console | improved randomness for ":rndstr" and ":rndnum" commands; |
| console | improved stability when using "special-login"; |
| console | improved system stability through RoMON session; |
| console | improved system stability when using autocomplete; |
| dhcp | fixed DHCP server "authoritative" and "delay-threshold" settings (introduced in v7.12beta3); |
| ike2 | improved rekey collision handling; |
| ipsec | fixed Diffie-Hellman public value encoding size; |
| ipsec | fixed minor typo in logs; |
| ipsec | reduce disk writes when started without active configuration; |
| ipv6 | send RA and RA deprecate messages out three times instead of just once; |
| l3hw | improved system stability during IPv6 route offloading; |
| leds | added "dark-mode" functionality for RBwAPG-5HacD2HnD; |
| leds | added "wireless-status" and "wireless-signal-strength" configuration types for wifiwave2 interfaces; |
| log | improved logging for user actions; |
| lte | fixed 5G data-class reporting for Chateau 5G; |
| lte | fixed APN authentification in multi APN setup for R11e-LTE6; |
| lte | fixed IPv6 prefix for MBIM modems in multi-apn setup when IPv6 APN used as not first APN; |
| lte | fixed RSSI for FG621-EA modem to show the correct value; |
| lte | fixed startup race condition when SIM card is in "up" slot for LtAP mini; |
| mpls | improved FastPath next-hop selection hash algorithm; |
| netinstall-cli | added empty configuration option "-e"; |
| netwatch | decreased "thr-tcp-conn-time" maximum limit to 30 seconds; |
| ovpn | improved system stability; |
| pimsm | improved system stability; |
| qsfp | added 50Gbps rate support for QSFP28 interfaces; |
| qsfp | fixed sub-interface EEPROM monitor data output (introduced in v7.12beta3); |
| qsfp | improved auto link detection for 100G CWDM4 modules and AOC cables (introduced in v7.12beta3); |
| qsfp | use sub-interface configuration for establishing link (for 40Gbps and 100Gbps links, all sub-interfaces must be enabled); |
| routerboard | added "reset-button" support for RB800 and RB1100 devices; |
| ssh | improved connection stability when pasting large chunks of text into console; |
| supout | added interface list members section; |
| switch | improved resource allocation for 98DX224S, 98DX226S, and 98DX3236 switch chips; |
| traffic-generator | fixed traffic-generator on CHR and x86; |
| usb | added support for RTL8153 USB ethernet on ARM, ARM64 and x86; |
| vrf | limit maximum VRFs to 1024; |
| vxlan | improved system stability for Tile devices; |
| webfig | fixed "Days" property configuration change under "IP/Firewall" menu; |
| webfig | fixed timezone for interface "Last Link Down/Up Time"; |
| webfig | improved Webfig performance and responsiveness; |
| webfig | try to re-establish connection after disconnect; |
| wifiwave2 | added an alternative QoS priority assignment mechanism based on IP DSCP (CLI only); |
| wifiwave2 | added station-bridge interface mode (CLI only); |
| wifiwave2 | do not show default "l2mtu" on compact export; |
| wifiwave2 | fixed PTK renewal for interfaces in station mode; |
| wifiwave2 | fixed sniffer command not receiving any QoS null function frames when using 802.11ax radios; |
| wifiwave2 | fixed untagged VLAN 1 entry when using "vlan-id" setting together with vlan-filtering bridge; |
| wifiwave2 | fixed warning on CAP devices when radar detected; |
| wifiwave2 | implemented an option to transmit IP multicast packets as unicasts (CLI only); |
| wifiwave2 | improved compliance with regulatory requirements; |
| wifiwave2 | make 4-way handshake procedure more robust when acting as supplicant (client); |
| winbox | added "Comment" under "Routing/BFD/Configuration" menu; |
| winbox | added "g" flag under "IPv6/Routes" menu; |
| winbox | added "Name Format" property under "WifiWave2/Provisioning" menu; |
| winbox | changed "MBR Partition Table" checkbox to unchecked by default under "System/Disks/Format-Drive" menu; |
| winbox | fixed "Address" property under "WifiWave2/Remote-CAP" menu; |
| winbox | fixed "Group Key Update" maximum value under "WifiWave2/Security" menu; |
| winbox | fixed entry numbering and ordering under "WifiWave2/Provisioning" menu; |
| winbox | fixed minor typos; |
| wireguard | allow to specify client settings under peer menu which will be included in configuration file and QR code; |
| wireguard | generate Wireguard peer keys and preshared-key automatically, if value is specified but is not base64 string; |
| wireguard | removed "wg-add-client" configuration wizard (introduced in v7.12beta3); |
| wireless | added more "radius-mac-format" options (CLI only); |
| www | fixed allowed address setting for REST API users; |
| www | fixed fragmented POST data for SCEP service; |
| x86 | i40e updated driver to 2.23.17 version; |
| x86 | igc updated driver to 5.10.194 version; |
| x86 | ixgbe updated driver to 5.19.6 version; |
| x86 | Realtek r8169 updated driver; |