MikroTik Changelogs
← Back to search All components

Component: lte

1,347 changelog entries across 321 version(s)

Releases by channel (stacked)

6.44beta9 Testing 2018-Sep-17 (7 years ago)
  • fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
6.43.1 Stable 2018-Sep-17 (7 years ago)
  • fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
6.44beta6 Testing 2018-Sep-11 (7 years ago)
  • fixed DHCP relay packet forwarding when in passthrough mode;
  • fixed Jaton/SQN modems preventing router from booting properly;
6.43 Stable 2018-Sep-06 (7 years ago)
  • added additional D-Link PIDs;
  • added additional ID support for SIM7600 modem;
  • added additional low endpoint SIM7600 PIDs;
  • added eNB ID to info command;
  • added extended LTE signal info for SIM7600 modules;
  • added extended signal information for Quectel LTE EC25 and EP06 modem;
  • added ICCID reading for info command R11e-LTE and R11e-LTE-US;
  • added "registration-status" parameter under "/interface lte info" command;
  • added roaming status reading for info command;
  • added "sector-id" to info command;
  • added support for alternative SIM7600 PID;
  • added support for Novatel USB730LN modem with new ID;
  • added support for Quanta 1k6e modem;
  • allow to execute concurrent internal AT commands;
  • allow to use multiple PLS modems at the same time;
  • do not allow to remove default APN profile;
  • do not allow to send "at-chat" commands for configless modems;
  • expose GPS channel for PLS modems;
  • fixed LTE registration in 2G/3G mode;
  • fixed SIM7600 registration info;
  • fixed SIM7600 series module support with newer device IDs;
  • ignore empty MAC addresses during Passthrough discovery phase;
  • improved modem event processing;
  • improved r11e-LTE and r11e-LTE-US dialling process;
  • improved r11e-LTE configuration exchange process;
  • improved reading of SMS message after entering running state;
  • improved readings of info command results for the SXT LTE;
  • improved stability of USB LTE interface detection process;
  • properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
  • renamed LTE scan tool field "scan-code" to "mcc-mnc";
  • show UICC in correct format for SXT LTE devices;
  • use "/32" address for the Passthrough feature when R11e-LTE module is used;
  • use alphanumeric operator format in info command;
6.43rc66 Testing 2018-Aug-28 (7 years ago)
  • fixed LTE registration in 2G/3G mode;
6.43rc64 Testing 2018-Aug-23 (7 years ago)
  • added "sector-id" to info command;
  • fixed SIM7600 series module support with newer device IDs;
6.42.7 Stable 2018-Aug-17 (7 years ago)
  • added signal readings under "/interface lte scan" for 3G and GSM modes;
  • fixed memory leak on USB disconnect;
  • fixed SMS send feature when not in LTE network;
6.43rc51 Testing 2018-Aug-01 (8 years ago)
  • added "registration-status" parameter under "/interface lte info" command;
  • added additional D-Link PIDs;
  • added additional low endpoint SIM7600 PIDs;
  • added signal readings under "/interface lte scan" for 3G and GSM modes;
  • fixed memory leak on USB disconnect;
  • fixed SMS send feature when not in LTE network;
  • ignore empty MAC addresses during Passthrough discovery phase;
  • properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
6.43rc45 Testing 2018-Jul-17 (8 years ago)
  • added additional ID support for SIM7600 modem;
6.43rc44 Testing 2018-Jul-11 (8 years ago)
  • added support for alternative SIM7600 PID;
6.43rc34 Testing 2018-Jun-21 (8 years ago)
  • added eNB ID to info command;
6.43rc32 Testing 2018-Jun-19 (8 years ago)
  • show UICC in correct format for SXT LTE devices;
6.43rc27 Testing 2018-Jun-12 (8 years ago)
  • added additional ID support for SIM7600 modem;
  • added support for Quanta 1k6e modem;
  • improved r11e-LTE and r11e-LTE-US dialling process;
  • improved readings of info command results for the SXT LTE;
  • improved stability of USB LTE interface detection process;
6.43rc23 Testing 2018-Jun-05 (8 years ago)
  • improved modem event processing;
6.43rc21 Testing 2018-May-29 (8 years ago)
  • do not allow to remove default APN profile;
6.43rc19 Testing 2018-May-25 (8 years ago)
  • added extended signal information for Quectel LTE EC25 and EP06 modem;
  • added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
6.42.3 Stable 2018-May-24 (8 years ago)
  • fixed automatic LTE band selection for R11e-LTE;
6.43rc17 Testing 2018-May-23 (8 years ago)
  • added ICCID reading for info command R11e-LTE (CLI only);
  • added roaming status reading for info command (CLI only);
  • improved r11e-LTE configuration exchange process;
  • renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
  • use alphanumeric operator format in info command;
6.43rc14 Testing 2018-May-18 (8 years ago)
  • added support for Novatel USB730LN modem with new ID;
6.42.2 Stable 2018-May-17 (8 years ago)
  • improved LTE communication process on MMIPS platform devices;
6.43rc12 Testing 2018-May-11 (8 years ago)
  • use "/32" address for the Passthrough feature when R11e-LTE module is used;
6.43rc11 Testing 2018-May-10 (8 years ago)
  • added extended signal information for Quectel LTE EP06 modem;
  • improved LTE communication process on MMIPS platform devices;
6.43rc7 Testing 2018-May-08 (8 years ago)
  • do not allow to send "at-chat" commands for configless modems;
6.43rc5 Testing 2018-Apr-25 (8 years ago)
  • allow to execute concurrent internal AT commands;
  • improved r11e-LTE and r11e-LTE-US dialling process;
  • improved reading of SMS message after entering running state;
6.42.1 Stable 2018-Apr-23 (8 years ago)
  • allow to send "at-chat" command over disabled LTE interface;