Component: lte
1,291 changelog entries across 312 version(s)
Releases by channel (stacked)
- fixed Passthrough support;
- update info command with "location area code" (LAC);
- provide lte info "physical cell id" values (R11e-LTE only);
- fixed authentication for non LTE modes;
- do not reset modem when it is not possible to access SMS storage;
- fixed modem initialization after reboot;
- fixed PIN option after setting up the band;
- added "/interface lte apn" menu (Passthrough requires reconfiguration);
- added Passthrough support;
- fixed user authentication for R11e-LTE when new firmware is used;
- temporarily disabled user authentication using user/password PAP/CHAP support for R11e-LTE (introduced in v6.41rc44);
- fixed PIN option after setting up the band;
- fixed error when trying to add APN profile without name;
- fixed rare crash when initializing LTE modem after reset;
- added Passthrough support (CLI only);
- fixed modem initialization after reboot;
- limited minimal default route distance to 1;
- added "/interface lte apn" menu (Passthrough requires reconfiguration);
- added Passthrough support (CLI only);
- fixed modem initialization after reboot;
- fixed modem initialization after reboot;
- added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
- do not reset modem when it is not possible to access SMS storage;
- added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
- added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
- added Passthrough support (CLI only);
- added support for ZTE ME3630 E1C with additional "/port" for GPS usage;
- automatically add "/ip dhcp-client" configuration on interface;
- changed default values to "add-default-route=yes", "use-peer-dns=yes" and "default-route-distance=2";
- do not show USB LTE modem under "/port" menu;
- fixed ethernet flap when LTE establishes connection;
- fixed SXT LTE graphs in QuickSet;
- improved reliability of USB LTE modems;
- fixed LTE not passing any traffic while in running state;
- improved info channel background polling;
- improved relialibility on SXT LTE;
- replaced "user-command" with "at-chat" command;
- added "session-uptime" in info command;
- added LTE signal level reading for Cinterion modems;
- added error handling for remote AT execute;
- added initial support for DWR-910 modem;
- added initial support for Quectel ec25;
- added initialization for Cinterion;
- added log entry for SMS delivery report;
- added support for Vodafone R216 (Huawei);
- buffer AT events while info command is active;
- fixed "/interface lte info X once";
- fixed IPv6 address prefix on interface
- fixed network mode selection for me909u, mu609;
- fixed older standard CEREG parsing;
- fixed support for Huawai R216;
- fixed user-command;
- reset interface stats on "link-down";
- increased delay when setting sms send mode;
- added support for more Vodafone K4201-Z, Novatel USB620L, PANTECH UML295 and ZTE MF90 modems;
- allow to execute concurrent info commands;
- fixed dwm-222, Pantech UML296 support;
- fixed init delay after power reset;
- increased delay when setting sms send mode;
- return info data when all the fields are populated;
- added ability to send/receive sms using '/tool sms';
- added dlink dwm-157 D, dwm-222 support;
- added huawei me909s variant;
- added initial deregistration only for bandrich modems;
- added logging for usb config switching;
- added Pantech UML295, Vodafone K4201-Z, ZTE MF823/MF831 support;
- added rndis for ZTE MF8xx;
- added support for more dlink dwm-222 configurations;
- added switch for Huawei K5160;
- added zte K5008-Z back;
- adjusted usb config for dlink dwm-157 D;
- fixed at chat condition storage;
- fixed band setting for sxt lte;
- fixed band unsetting;
- fixed default channels for dlink dwm-157;
- fixed ip activation when CREG (circuit switched) state remains in not registered state;
- fixed setting correct lte band for sxt lte;
- process initial state change to deregistred, when lockup occurs;
- reset if sms storage set fails;
- fixed access technology update;
- added allow-roaming option for Huawei MU709, ME909s devices;
- added cinterion pls8 support;
- added support for Huawei E3531;
- added support for ZTE ZM8620;
- added use-peer-dns option (will work only combined with add-default-route);
- changed driver loading for class 2 usb rndis devices;
- display message in lte,error log if no response received;
- display message in lte,error log when PIN is required;
- fix crash on SXT LTE while resetting card while at high traffic;
- fixed access technology logging;
- fixed connection for Huawei without cell info;
- fixed modem init when pin request present;
- fixed modem network configuration version checks;
- fixed network-mode support after downgrade;
- Huawei MU609 must use latest firmware to work correctly;
- improved multiple same model modems identification;
- show uicc for Huawei modems;
- use only creg result codes as network status indications;
- use only creg result codes as network status indications;
- do not allow to set multiple modes when it is not supported;
- do not allow to set multiple modes when it is not supported;
- fixed address acquisition on Huaweii LTE interfaces;
- added ipv6 support for SXT LTE;
- changed AT command processing;
- changed AT parsing because supported Huawei modems use unsolicited events instead of polling;
- fixed bandlux modem dialing;
- fixed crash on early initialization;
- improve situation when SXT modem never finds operator;
- replaced signal-strength with rssi in info command;
- support Alt38XX modem;
- support for zte mf820s2;
- supported modems now use unsolicited events for network monitoring;
- use timer for modem info;