Version: 6.44beta75
Testing52 changelog entries across 28 component(s)
2019-Feb-08 (7 years ago)
| Component | Change |
|---|---|
| bridge | fixed log message when hardware offloading is being enabled; |
| bridge | fixed packet forwarding with enabled DHCP Snooping and Option 82; |
| bridge | fixed system's identity change when DHCP Snooping is enabled (introduced in v6.44beta61); |
| bridge | improved packet handling when hardware offloading is being disabled; |
| certificate | show digest algorithm used in signature; |
| chr | distribute NIC queue IRQ's evenly across all CPUs; |
| chr | fixed IRQ balancing when using more than 32 CPUs; |
| crs3xx | fixed packet forwarding through SFP+ ports when using 100Mbps link speed; |
| crs3xx | fixed SFP+ linking using 1.25G SFP modules (introduced in v6.44beta39); |
| dhcpv6-server | fixed missing gateway for binding's network if RADIUS authentication was used; |
| dhcpv6-server | show "client-address" parameter for bindings; |
| ethernet | added "tx-rx-1024-max" counter to Ethernet stats; |
| ethernet | fixed packet forwarding when SFP interface is disabled on hEX S; |
| fetch | added option to specify multiple headers under "http-header-field", including content type; |
| fetch | improved stability when using HTTP mode; |
| fetch | removed "http-content-type" parameter; |
| gps | increase precision for dd format; |
| hotspot | added "https-redirect" under server profiles; |
| ike2 | retry RSA signature validation with deduced digest from certificate; |
| ipsec | require write policy for key generation; |
| kidcontrol | use "/128" prefix-length for IPv6 addresses; |
| lldp | fixed missing capabilities fields on some devices; |
| lte | added multiple APN support for R11e-4G; |
| lte | fixed passthrough DHCP address forward when other address is acquired from operator; |
| lte | improved SIM7600 initialization after reset; |
| lte | query "cfun" on initialization; |
| lte | require write policy for at-chat; |
| lte | update firmware version information after R11e-LTE/R11e-4G firmware upgrade; |
| ntp-client | fixed "dst-active" and "gmt-offset" being updated after synchronization with server; |
| ppp | fixed dynamic route creation towards VPN server when "add-default-route" is used; |
| quickset | fixed "country" parameter not properly setting regulatory domain configuration; |
| rb4011 | fixed SFP+ interface full duplex and speed parameter behavior; |
| rb4011 | improved SFP+ interface linking to 1Gbps; |
| sfp | fixed possible reboot loop when inserting SFP modules in CRS328-4C-20S-4S+ (introduced in v6.44beta61); |
| smb | fixed macOS clients not showing share contents; |
| smb | fixed possible buffer overflow; |
| smb | fixed Windows 10 clients not able to establish connection to share; |
| snmp | fixed "rsrq" reported precision; |
| snmp | report ifSpeed 0 for sub-layer interfaces; |
| switch | added comment field to switch ACL rules; |
| tr069-client | added "connection-request-port" parameter (CLI only); |
| usb | improved USB device powering on startup for hAP ac^2 devices; |
| usb | increased default power-reset timeout to 5 seconds; |
| userman | added first and last name fields for signup form; |
| w60g | fixed disconnection issues in PtMP setups; |
| winbox | renamed "Default AP Tx Rate" to "Default AP Tx Limit"; |
| winbox | renamed "Default Client Tx Rate" to "Default Client Tx Limit"; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| wireless | improved antenna gain setting for devices with built in antennas; |
| wireless | improved connection stability for new model Apple devices; |
| wireless | improved system stability when scanning for other networks; |
| wireless | show "installation" parameter when printing configuration; |