Component: ethernet

6.44beta39 Testing 2018-Nov-27 (7 years ago)

• fixed IPv4 and IPv6 packet forwarding on IPQ4018 devices;
• improved per core ethernet traffic classificator on mmips devices;

6.44beta28 Testing 2018-Oct-29 (7 years ago)

• fixed linking issues on wAP ac, RB750Gr2 and Metal 52 ac (introduced in v6.43rc52);

6.44beta17 Testing 2018-Oct-04 (7 years ago)

• fixed IPv6 packet forwarding on IPQ4018 devices;

6.44beta14 Testing 2018-Oct-01 (7 years ago)

• fixed IPv6 packet forwarding on IPQ4018 devices;

6.44beta6 Testing 2018-Sep-11 (7 years ago)

• fixed IPv6 packet forwarding on IPQ4018 devices;

6.43 Stable 2018-Sep-06 (7 years ago)

• do not show "combo-state" field if interface is not SFP or copper;
• properly handle Ethernet interface default configuration;

6.40.9 Long-term 2018-Aug-20 (7 years ago)

• improved large packet handling on ARM devices with wireless;
• removed obsolete slave flag from "/interface vlan" menu;

6.42.7 Stable 2018-Aug-17 (7 years ago)

• improved large packet handling on ARM devices with wireless;
• removed obsolete slave flag from "/interface vlan" menu;

6.43rc56 Testing 2018-Aug-13 (7 years ago)

• fixed possible link flaps after disabling/enabling the interface (introduced in v6.43rc51);
• improved large packet handling on ARM devices with wireless;
• removed obsolete slave flag from "/interface vlan" menu;

6.43rc51 Testing 2018-Aug-01 (7 years ago)

• fixed default ethernet advertise values after configuration reset (introduced in v6.43rc33)

6.43rc45 Testing 2018-Jul-17 (7 years ago)

• improved stability when changing ethernet interface L2MTU on CRS328-24P-4S+ (introduced in v6.43rc11);

6.43rc40 Testing 2018-Jul-02 (7 years ago)

• properly handle Ethernet interface default configuration;

6.43rc34 Testing 2018-Jun-21 (7 years ago)

• do not show "combo-state" field if interface is not SFP or copper;

6.41 Stable 2017-Dec-22 (8 years ago)

• removed "master-port" parameter;

6.41rc47 Testing 2017-Oct-18 (8 years ago)

• fixed missing "sfp-tx-power" option (introduced in v6.41rc14);

6.39.3 Long-term 2017-Oct-12 (8 years ago)

• fixed occasional broken interface order after reset/first boot;
• fixed rare linking problem with forced 10Mbps full-duplex mode;

6.41rc34 Testing 2017-Sep-27 (8 years ago)

• removed "master-port" parameter;

6.38.7 Long-term 2017-Jun-20 (8 years ago)

• fixed "loop-protect" on "master-port";
• fixed rare switch chip hang (could cause port flapping);

6.39 Stable 2017-Apr-27 (9 years ago)

• added "voltage-too-low" status for single port power injector devices;
• fixed "loop-protect" on "master-port";
• fixed rare switch chip hang (could cause port flapping);
• fixed unnecessary power cycle of powered device when changing any poe-out related setting on single port power injector devices;
• renamed "rx-lose" to "rx-loss" in ethernet statistics;
• reversed poe-priority on hEX PoE and OmniTIK 5 PoE to make "poe-priority" consistent to all other RouterOS priorities;

6.38 Stable 2016-Dec-30 (9 years ago)

• added "k" and "M" unit support to Ethernet Bandwidth setting;
• fixed "tx-fcs-error" on SFP+ interfaces when loop-protect is enabled;

6.37.2 Stable 2016-Nov-08 (9 years ago)

• fixed interface speed reporting for x86 in log after reboot or if "disable-running-check=yes";
• fixed potential loopprotect crash;

6.37 Stable 2016-Sep-23 (9 years ago)

• added support for LAN9514 ethernet dongle;
• allow to force mtu value when actual-mtu is already the same;
• fixed loop-protect on bridged ports;
• fixed never ending loop in CDP packet processing;
• fixed rare kernel failure on non-switch ethernet reset;
• rb44ge now have disabled-running-check=no by default;

6.36 Stable 2016-Jul-20 (9 years ago)

• fixed incorrect ether1 link speed after reboot on rb4xx series routers;
• fixed memory leak when setting interface without changing configuration;

6.35.4 Stable 2016-Jun-09 (9 years ago)

• fixed memory leak when setting interface without changing configuration;

6.34.5 Long-term 2016-May-27 (9 years ago)

• do not allow mtu to be higher than l2mtu and l2mtu to be higher than max-l2mtu (reduce automatically on upgrade if it was wrong before);