Version: 6.47rc2
Testing75 changelog entries across 38 component(s)
2020-May-25 (5 years ago)
| Component | Change |
|---|---|
| api | added ECDHE cipher support for "api-ssl" service; |
| bonding | fixed ALB and TLB bonding modes after interface disable/enable (introduced in v6.47beta19); |
| bonding | fixed packet receiving on bonding slave ports (introduced in v6.47beta19); |
| bridge | added warning message when a bridge port gets dynamically added to VLAN range; |
| chr | added support for hardware watchdog on ESXI; |
| crs3xx | fixed tagged VLAN packet receiving on Ethernet interfaces for CRS354 devices (introduced in v6.47beta49); |
| crs3xx | improved 10G interface initialization on CRS312 devices; |
| dhcpv4-server | disallow zero lease-time setting; |
| dhcpv6-server | do not require "server" parameter for bindings; |
| dns | added support for multiple type static entries; |
| dot1x | added "radius-mac-format" parameter; |
| dot1x | improved Dot1X service stability when receiving bogus packets; |
| dot1x | improved value validation for dynamically created switch rules; |
| added support for multiple "to" recipients; | |
| ethernet | fixed interface stopping responding after blink command execution on CCR2004-1G-12S+2XS; |
| filesystem | fixed NAND memory going into read-only mode or becoming unstable over time; |
| health | improved stability for system health monitor on CCR2004-1G-12S+2XS; |
| ike2 | added support for RFC8598; |
| ike2 | allow initiator address change before authentication; |
| ike2 | fixed authentication handling when initiator disconnects before RADIUS response; |
| interface | improved system stability when receiving bogus packets; |
| ipsec | added "split-dns" parameter support for mode configuration; |
| ipsec | added "use-responder-dns" parameter support; |
| ipsec | allow specifying two peers for a single policy for failover; |
| ipsec | place dynamically created IPsec policies at the begining of the table; |
| l2tp | added "src-address" parameter for L2TP client; |
| l2tp | added "use-peer-dns" parameter for L2TP client; |
| l2tp | improved dynamically created IPsec configuration updating; |
| l2tp | use L2TP interface when adding dynamic IPsec peer; |
| lcd | improved general system stability when LCD is not present; |
| log | added logging entry when changing user's password; |
| log | added tunnel endpoint address to establishment and disconnect logging entries; |
| log | fixed logging topic for MAC address learning on a different bridge port events; |
| log | made startup script failures log as critical errors; |
| lte | fixed "band" parameter persistence after disable/enable; |
| lte | fixed "ecno" and "rscp" value reporting on R11e-LTE6; |
| lte | fixed VLAN interface passthrough support; |
| lte | improved stability during firmware upgrade; |
| netwatch | improved Netwatch service stability when invalid configuration values are passed; |
| ovpn | added "use-peer-dns" parameter for OVPN client; |
| poe | fixed missing PoE out settings on CRS354-48P-4S+2Q (introduced in v6.47beta49); |
| port | removed serial console port on hEX S; |
| ppp | removed "comment", "set" and "edit" commands from "PPP->Active" menu; |
| pptp | added "use-peer-dns" parameter for PPTP client; |
| profile | added support for CCR2004-1G-12S+2XS; |
| qsfp | added support for FEC mode (fec74), with the FEC mode disabled by default |
| quickset | fixed invalid configuration applying when performing changes during LTE modem initialization process; |
| routerboard | added "hold-time" parameter to mode-button menu; |
| routerboard | added "reset-button" menu - custom command execution with reset button; |
| routing | improved routing service stability when receiving bogus packets; |
| sfp28 | added support for FEC modes (fec74 and fec91), with fec91 mode already enabled by default; |
| sfp28 | fixed interface linking after power cycle on CCR2004-1G-12S+2XS (introduced in v6.47beta49); |
| switch | correctly enable and disable CPU Flow Control on RB3011UiAS; |
| tr069-client | added LTE firmware update functionality support; |
| tr069-client | added additional LTE information parameters; |
| tr069-client | added additional wireless registration table parameters; |
| tr069-client | added interface type parameter support; |
| tr069-client | added multiple simultaneous session support for diagnostics test; |
| tr069-client | added total connection tracking entries parameter; |
| ups | added battery info for APC SmartUPS 2200; |
| webfig | fixed 5GHz wireless interface "frequency" parameter value list on Audience; |
| winbox | added "auth-info" parameter under "Dot1X->Active" menu; |
| winbox | added "auth-types", "comment", "mac-auth-mode" and "reject-vlan-id" parameters for Dot1X server; |
| winbox | added "bus" parameter for "USB Power Reset" command on NetMetal ac^2; |
| winbox | added "comment" parameter and "dynamic" flag support under "Switch->Rule" table; |
| winbox | added "comment" parameter for Dot1X client; |
| winbox | added "region" parameter for W60G interfaces; |
| winbox | added "skip-dfs-channels" parameter to wireless interface menu; |
| winbox | added enable and disable buttons for "MPLS->MPLS Interface" table; |
| winbox | do not allow to enter empty strings in "caps-man-names" and "common-name" parameters; |
| winbox | fixed WDS usage when connecting to RouterOS access point using QuickSet; |
| winbox | fixed dates and times in interface link up/down properties (WinBox v3.24 required); |
| winbox | fixed wireless sniffer parameter setting; |
| wireless | fixed Nstreme wireless protocol performance decrease; |
| wireless | updated "egypt" regulatory domain information; |