Component: ethernet
187 changelog entries across 118 version(s)
Releases by channel (stacked)
- improved system stability for L009 and hAP ax lite devices;
- improved packet CPU core classifier for Alpine CPUs for non IPv4/IPv6 traffic;
- added "supported" and "sfp-supported" values for "monitor" command;
- fixed default "advertise" property for CRS310-8G+2S+ device (introduced in v7.12beta3);
- added "supported" and "sfp-supported" values for "monitor" command;
- fixed forced half-duplex 10/100 Mbps link speeds on CRS312 device;
- improved interface stability for CRS312 device;
- fixed forced half-duplex 10/100 Mbps link speeds on CRS312 device;
- improved interface stability for CRS312 device;
- fixed half-duplex forced mode at 10Mbps and 100Mbps on ether1 for RB5009, Chateau 5G ax and hAP ax3 devices;
- fixed half-duplex forced mode at 10Mbps and 100Mbps on ether1 for RB5009, Chateau 5G ax and hAP ax3 devices;
- added "5Gbps" option for speed setting;
- added "5Gbps" option for speed setting;
- improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
- improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
- improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
- improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
- improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
- fixed cable-test for some devices (e.g. RB2011, RB951G-2HnD);
- improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
- improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
- fixed cable-test for some devices (e.g. RB2011, RB951G-2HnD);
- fixed IP connectivity on SFP/SFP+ interfaces for CCR2004-1G-12S+2XS device (introduced in v6.48beta58);
- fixed interface stopping responding after blink command execution on CCR2004-1G-12S+2XS;
- fixed interface stopping responding after blink command execution on CCR2004-1G-12S+2XS;
- automatically detect interface when using IP address for power-cycle-ping;
- do not enable interface after reboot that is already disabled;
- send requests only from ethernet interface when using MAC address for power-cycle-ping;
- do not enable interface after reboot that is already disabled;