Version: 7.15beta4
Testing111 changelog entries across 37 component(s)
2024-Mar-04 (2 years ago)
| Component | Change |
|---|---|
| bgp | fixed prefix count when BGP sessions run with multiple AFIs; |
| bgp-vpn | use VRF interface as gateway for leaked connected routes; |
| branding | added option to hide default configuration prompt; |
| branding | added option to hide or replace default caps-mode-script; |
| bridge | added MVRP support (CLI only); |
| bridge | rename monitor property "path-cost" to "actual-path-cost"; |
| certificate | added trusted parameter for certificate import; |
| chr | allow to "generate-new-id" only while CHR is running on level "free" license; |
| console | added "proplist" parameter to interactive commands; |
| console | added "type" parameter to ":resolve" command; |
| console | added "use-script-permissions" option when running scripts from CLI; |
| console | added hotkey "F8" to print entire multiline input; |
| console | added log for script execution failures; |
| console | added option to get "about" value (dynamically created text field by RouterOS services like CAPsMAN); |
| console | added option to read and change file line endings in full-screen editor; |
| console | added warning log for modified filenames due to reserved characters; |
| console | do not convert string to array in ":deserialize" command; |
| console | fixed ":onerror" behavior when "do" block is missing; |
| console | fixed "export where" functionality in certain menus; |
| console | fixed console prompt when entering hot lock mode with "F7"; |
| console | fixed do/while implementation not working with variables (introduced in v7.14); |
| console | fixed filtering by "dhcp" flag in "/ip/arp" menu; |
| console | fixed multiple typos in help; |
| console | optimized configuration export to prevent startup of processes without any configuration; |
| console | replace reserved characters to backup and certificate export file names with underscores; |
| console | show system note before serial login if enabled; |
| console | use user permissions when running scripts from WinBox and WebFig; |
| discovery | added LLDP MAC/PHY Configuration/Status TLV support; |
| discovery | added LLDP Maximum Frame Size TLV support; |
| discovery | added LLDP Port Description TLV support; |
| discovery | advertise only physical interface name for LLDP PortID TLV; |
| discovery | always send LLDP MED Power TLV if MED was received; |
| discovery | fixed high CPU utilization when "tx-only" mode is set; |
| discovery | optimized LLDP information update; |
| disk | added option to auto configure media sharing; |
| disk | added support for formatting exfat file-system; |
| disk | improved support for formatting ext4 file-system; |
| dns | added support for "adlist"; |
| dns | added VRF support (CLI only); |
| dns | improved system stability when caching entries; |
| ethernet | fixed management port disable/enable on CCR2004-1G-12S+2XS, CCR2004-1G-2XS-PCIe, CCR2216, CCR2116 devices; |
| file | allow adding and renaming files and directories; |
| health | added log for fan state changes on CRS3xx, CRS5xx, CCR2xxx, CCR1016r2, CCR1036r2 devices; |
| install | cdrom and hdd install images contain additional packages that can be interactively selected; |
| lte | apply the same configuration for Microsoft branded EM12-G modem (Surface Mobile Broadband) as for Quectel EM12-G; |
| lte | fixed R11e-LTE-US modem dial-up; |
| media | added support for DLNA; |
| modem | send APN authentication for BG77 modem also if ppp-client interface created manually; |
| poe-out | added LLDP power management support for devices with single PoE-out port; |
| poe-out | fixed powering devices if input voltage is lower than 12V for hEX PoE (introduced in v7.9); |
| poe-out | moved "PoE LLDP" property from "/interface/ethernet/poe" to "/ip/neighbor/discovery-settings" and enable it by default; |
| ppp | added "Mikrotik-IPV6-Stats-Prefix" option for RADIUS "Delegated-IPv6-Prefix" account by using statistics from dynamic queues; |
| ppp | added log when disconnecting a client due to "WISPr-Session-Terminate-Time" RADIUS attribute; |
| ppp | fixed "on-down" script running even when tunnel was not up; |
| profiler | added "neighbor-discovery" task; |
| qos-hw | added congestion avoidance support for 98DX8xxx, 98DX4xxx, 98DX325x switch chips (CLI only); |
| qos-hw | added ECN marking support for compatible switches; |
| qos-hw | added support for QoS profile assignment via ACL rules; |
| qos-hw | added WRED support for compatible switches; |
| radius | added "require-message-auth" option that requires "Message-Authenticator" in received Access-Accept/Challenge/Reject messages; |
| radius | include "Message-Authenticator" in any RADIUS communication messages besides accounting for all services; |
| route | do not allow routes with empty "dst-address"; |
| route | fixed bgp-vpn prefix import with the same route distinguisher (RD); |
| route | improved system stability; |
| route | show route-distinguisher (RD) in route print; |
| route-filter | fixed ext community list matcher; |
| sfp | added "100M-baseFX" link mode support for compatible devices; |
| sfp | added "sfp-ignore-rx-los" setting; |
| sfp | fixed link establishment with 100Mbps optical modules (requires "/interface ethernet reset" or adding "100M-baseFX" modes for advertise or speed properties); |
| sfp | fixed missing Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases; |
| sfp | ignore SFP RX LOS signal for modules with bad EEPROM; |
| sfp | improved "sfp-tx-power" value monitoring in certain cases; |
| sms | added option to select SMS storage; |
| sms | added SMS PDU to SMS inbox "print detail"; |
| sms | improved SMS handling; |
| sms | use "gsm" logging topic for serial modem SMS logs; |
| ssh | added passphrase option for host key export; |
| ssh | added support for user Ed25519 private keys; |
| ssh | export host Ed25519 public key; |
| ssh | fixed permissions to run ".auto.rsc" scripts; |
| ssh | removed RSA flag for user SSH keys; |
| ssh | show key type and key length for user SSH keys; |
| sstp | disconnect clients when server is disabled; |
| switch | added support for multiple ingress and egress port mirroring on 98DXxxxx switches; |
| switch | added support for RSPAN mirroring on 98DXxxxx switches; |
| switch | fixed L3HW and QoS monitor during switch reset; |
| system | added resource values (Product name, File name and File version) for Windows executable files; |
| traffic-flow | detect IPv4 source address if not set; |
| userman | added "require-message-auth" option that requires "Message-Authenticator" in received Access-Request messages; |
| userman | include "Message-Authenticator" in any RADIUS communication messages besides accounting for all services; |
| vlan | ensure that VLAN MTU remains unchanged when adjustments are made to the parent interface MTU, only modifications to the L2MTU might impact VLAN MTU; |
| vlan | fixed MTU reset on bridge after reboot; |
| wifi | do not report disabled state for CAPsMAN managed interface; |
| wifi | fixed configuration export for "disabled" property; |
| wifi | improve channel selection after radar detection events; |
| wifi | rename "available-channels" parameter to "channel-priorities" and include desirability rating for each channel; |
| wifi | report current CAPsMAN address and identity on CAP; |
| winbox | added "Download" and "Flush" buttons under "System/Certificates/CRL" menu; |
| winbox | added "Flat Snoop" button under "WiFi" menu; |
| winbox | added "Request logout" button under "System/Users/Active Users" menu; |
| winbox | added "Trusted" checkbox under "System/Certificates/Import" menu; |
| winbox | added invalid flag under "IP/DHCP Relay" menu; |
| winbox | added missing SFP monitoring properties under "Interface/SFP" menu; |
| winbox | allow to specify "M" or "G" postfix for download, upload or total limits under "User Manager/Limitations" menu; |
| winbox | show "Valid Servers" and "Unknown Servers" column by default under "IP/DHCP Server/Alerts" menu; |
| winbox | show SIM settings for SXTR device under "Interfaces/LTE/Modem" menu; |
| wireguard | added peer "tag" field and display it in logs; |
| wireguard | fixed "auto" argument usage for "private-key" and "preshared-key" settings; |
| x86 | fixed ixgbe Tx hang by disabling TSO; |
| x86 | ice driver update to v1.13.7; |
| x86 | ixgbe driver update to 5.19.9; |