Version: 7.20beta5
Testing36 changelog entries across 19 component(s)
2025-Jul-03 (9 months ago)
| Component | Change |
|---|---|
| bfd | fixed socket leak (additional fixes); |
| bgp | automatically create output.network blackhole routes; |
| bgp | do not show router-id error when instance is not active (introduced in v7.20beta2); |
| bgp | refresh WinBox when BGP session is created/deleted; |
| bgp | support for Advertising IPv4 Network Layer Reachability Information (NLRI) with an IPv6 Next Hop; |
| bridge | added dynamic tagged entry named "switch-cpu" in scenarios where the same VLAN spans multiple switch chips or is used on both HW and SW ports (additional fixes); |
| bridge | allow IPv6 FastPath when dhcp-snooping is enabled; |
| dhcp-server | improved logging when dual-stack is enabled but fails to acquire client MAC from DUID; |
| disk | disallow adding SMB share or user with empty name; |
| ethernet | improved ethernet stability when handling invalid packets on Alpine CPUs; |
| ethernet | improved performance for hEX Refresh and hEX S (2025); |
| filesystem | improved calculation of free space on NAND flash (fixes potential "disk is too small" issue); |
| ipsec | fixed responder on key exchange compute failure (introduced in v7.19); |
| lte | AT modems, fixed typos in commands sent to modem when APN with authentication is used (AT+CGAUTH; AT$QCPDPP); |
| lte | do not reconfigure modem if deactive eSIM profile is deleted; |
| lte | exempt eSIM provision from global CRL certificate settings; |
| lte | R11e-LTE and R11e-LTE6, fixed possible crash on device unexpected removal or during RouterOS shutdown; |
| radius | fixed RADIUS client section becoming unresponsive when RadSec is configured, but server is not responding; |
| radius | fixed wrong RadSec port number in logs; |
| radius | properly verify certificate when RadSec is used; |
| route | fixed issue when route table is installed to kernel without fib setting; |
| route | removed fib-reinstall; |
| sfp | fixed low power mode pins on CRS326-4C+20G+2Q+ for optical QSFP modules; |
| supout | added IPv6 NAT section; |
| switch | fixed ACL rules with "redirect-to-cpu" (introduced in v7.20beta2); |
| switch | fixed bonding issues after switch reset (introduced in v7.18); |
| switch | fixed port blocking with spanning tree on EN7523 switch (introduced in v7.19); |
| swos | changed firmware file location (URL) for software update checks; |
| system | improved system stability when processing large amount of traffic; |
| system | improved system stability when using FastTrack; |
| system | reduced RouterOS ARM package size; |
| vrrp | added "connection-tracking-port" and "connection-tracking-mode" settings for "sync-connection-tracking" (additional fixes); |
| wifi | avoid picking 5GHz channels by default which are unlikely to be supported by clients, can be overridden with channel.deprioritize-unii-3-4; |
| winbox | added missing properties to "Container" menu and improved field ordering; |
| winbox | fixed missing warning under "Routing/BGP/Instances" menu; |
| winbox | show/hide corresponding fields when switching RADIUS client mode between RadSec and UDP; |