Component: iot
186 changelog entries across 58 version(s)
Releases by channel (stacked)
- add a GPIO menu in WinBox;
- add Bluetooth output power control;
- allow a custom radio plan even under a regional lock;
- enforce the fixed antenna gain on boards with an embedded antenna;
- fix round-trip-time timing issues in LoRaWAN Basic Station;
- added LoRa keep alive logic for UDP protocol;
- added missing LoRa US radio plans;
- added Wiliot USB dongle support;
- allow maximum Modbus "timeout" property to be 10 seconds;
- monitor LoRa worker state (watchdog);
- pass Wiliot certification;
- pass Wiliot certification;
- added LoRa keep alive logic for UDP protocol;
- added missing LoRa US radio plans;
- added Wiliot USB dongle support;
- allow maximum Modbus "timeout" property to 10 seconds;
- monitor LoRa worker state (watchdog);
- added LoRa Tx delay setting;
- added MQTT subscribe message real-time monitoring option;
- added Wiliot support;
- fixed LoRa LBT issues, which caused Tx packets not getting delivered;
- fixed LoRa lockpack preventing lock from applying;
- improved LoRa stability;
- improved LoRa Tx handling;
- improved LoRa Tx scheduling;
- fixed LoRa lockpack preventing lock from applying;
- improved LoRa Tx scheduling;
- improved LoRa stability;
- added LoRa Tx delay setting;
- added MQTT subscribe message real-time monitoring option;
- added Wiliot support;
- fixed LoRa LBT issues, which caused Tx packets not getting delivered;
- improved LoRa Tx handling;
- added Bluetooth extended scanning and 1M/2M PHY support for the RB924i KNOT devices;
- added Bluetooth extended scanning, advertising, and 1M/2M/CODED PHY support for EC25 KNOT devices;
- added modbus delay using interframe-gap setting;
- improved LoRa FSK modulation downlinking;
- added Bluetooth extended scanning and 1M/2M PHY support for the RB924i KNOT devices;
- added Bluetooth extended scanning, advertising, and 1M/2M/CODED PHY support for EC25 KNOT devices;
- added modbus delay using interframe-gap setting;
- added LoRa Round Trip Time monitoring support;
- added Modbus rx-switch-offset parameter which helps offset Rx window;
- added mqtt disconnect/connect GUI options;
- added support for Modbus port baud-rates from 9600 to 115200;
- changed LoRa packet's timestamp format, which fixes duty cycle issues for some servers;
- improved Modbus multi-write registers handling;
- improved LoRa FSK modulation downlinking;
- added Modbus rx-switch-offset parameter which helps offset Rx window;
- added support for Modbus port baud-rates from 9600 to 115200;
- improved Modbus multi-write registers handling;
- added LoRa Round Trip Time monitoring support;
- changed LoRa packet's timestamp format, which fixes duty cycle issues for some servers;
- fixed an issue preventing LoRa downlink packets from being broadcasted;
- added mqtt disconnect/connect GUI options;
- added additional dongle firmwares to iot-bt-extra package;
- added an option to increase the amount of LoRa's traffic entries displayed;
- added support for MQTT last will message;
- adjusted default LoRa antenna gain values for specific devices;
- fixed an issue where channel #7 is ignored during LoRa LNS connection;
- fixed logic for unknown NetIDs;
- fixed support for LoRa Alliance NetID list;
- improved LoRa stability and error recovery;
- improvement to LoRa band verification logic;
- iot-bt-extra package stability improvement and additional dongle support;
- LoRa netid filters now can be configured as a "range";
- LoRa server list is no longer generated if the LR card is not physically attached;
- LR8G/9G firmware update;
- removed lora-package, LoRa functionality was moved into iot-package;
- removed non-existent GPIO pin functionality;
- added support for MQTT last will message;
- fixed logic for unknown NetIDs;
- fixed support for LoRa Alliance NetID list;
- fixed an issue where channel #7 is ignored during LoRa LNS connection;
- improved LoRa stability and error recovery;
- LoRa server list is no longer generated if the LR card is not physically attached;
- added additional dongle firmwares to iot-bt-extra package;
- improvement to LoRa band verification logic;