Component: switch
368 changelog entries across 182 version(s)
Releases by channel (stacked)
- fix broadcast traffic still reaching the CPU when port isolation is used on Atheros and MediaTek switches (additional fixes);
- add a high-priority CPU queue for control traffic on Marvell Prestera switches;
- fix CPU-sent VLAN-tagged packets with the DEI bit being dropped on Marvell Prestera switches;
- add packet and byte counters for ACL rules on Marvell Prestera switches;
- fix degraded slow-path throughput on CRS304 switch (introduced in v7.22);
- fix VLAN-tagged traffic being looped back in MLAG setups on CRS8xx series switches;
- fix VLAN-tagged traffic being looped back in MLAG setups on CRS8xx series switches;
- fix egress rate limiting with jumbo frames on Marvell Prestera switches;
- fix link flapping on QSFP cage ports when connecting to NVIDIA DGX Spark;
- fix VLAN-tagged traffic being looped back in MLAG setups on CRS8xx series switches;
- improve SFP/QSFP auto-negotiation on CRS8xx series switches;
- add packet and byte counters for ACL rules on Marvell Prestera switches (additional fixes);
- fix ACL rules remaining in the switch TCAM after removal (introduced in v7.25beta3);
- add interface-list support to port isolation;
- fix high CPU usage when removing switch VLANs on Atheros-based switch chips;
- fix switch rules not working on Atheros-based switch chips;
- fix switch rules port matchers not working on IPv6 traffic on Atheros-based switch chips;
- fix switch rules with rate limits stopping traffic on CRS3xx devices;
- improve stability on CRS326-24S+2Q+ devices;
- add packet and byte counters for ACL rules on Marvell Prestera switches;
- fix degraded slow-path throughput on CRS304 switch (introduced in v7.22);
- fix possible Rx traffic stall on CPU for devices with Marvell Prestera switch chip;
- fix stability issue during L2 loop for 98DX224S, 98DX226S, 98DX2528, and 98DX3236 switch chips;
- fix stability issue on RB3011 (introduced in v7.22);
- fixed IEEE reserved MAC handling for CRS1xx, CRS2xx switches;
- fixed default L2MTU drift for devices with QCA8337, Atheros8327 switch (introduced in v7.24beta2);
- increase "ingress-rate" and "egress-rate" maximum value to 400G;
- fixed issue with MAC table for RB2011 (introduced in v7.21);
- fixed rare possibility of tx-timeout or simultaneous flap of all switch ports on devices with Alpine CPUs;
- increase "ingress-rate" and "egress-rate" maximum value to 400G;
- increase "ingress-rate" and "egress-rate" maximum value to 400G;
- fixed rare possibility of tx-timeout or simultaneous flap of all switch ports on devices with Alpine CPUs;
- fixed IEEE reserved MAC handling for CRS1xx, CRS2xx switches;
- fixed rare possibility of tx-timeout or simultaneous flap of all switch ports on devices with Alpine CPUs;
- fixed issue with MAC table for RB2011 (introduced in v7.21);
- fixed missing ethernet counters for non-running interfaces on CRS8xx switches (introduced in v7.22);
- improved FDB operations on QCA8337, Atheros8327;
- rework how IEEE reserved MAC addresses are handled on QCA8337, Atheros8327;
- updated switch-marvell.npk driver;
- use names instead of numbers in switch menu configuration export;
- fixed stability issue when changing bridge multicast-router property on CRS1xx/2xx (introduced in v7.19);
- improved FDB operations on QCA8337, Atheros8327 (additional fixes);
- use names instead of numbers in switch menu configuration export;
- improved FDB operations on QCA8337, Atheros8327;
- rework how IEEE reserved MAC addresses are handled on QCA8337, Atheros8327;
- disable EEE on RB5009 and CCR2004-16G-2S+ devices;
- disable EEE on RB5009 and CCR2004-16G-2S+ devices;
- updated switch-marvell.npk driver;
- fixed missing switch-cpu port counters;
- improved system stability when changing bridge multicast-router property on CRS1xx/2xx (introduced in v7.19);
- updated switch-marvell.npk driver;