Search changelog entries
| Component | Change |
|---|---|
| bridge | properly handle packets when bridge port changes states |
| crs317 | properly report link state when one side has disabled interface; |
| ethernet | properly handle Ethernet interface default configuration; |
| ike2 | use "/32" netmask by default on initiator if not provided by responder; |
| package | do not allow to install out of bundle package if it already exists within bundle; |
| package | free up used storage space consumed by old RouterOS upgrades; |
| package | renamed "current-version" to "installed-version" under "/system package install"; |
| sms | converted "keep-max-sms" feature to "auto-erase"; |
| snmp | added CAPsMAN "remote-cap" table; |
| supout | added "ip-cloud" section to supout file; |
| usb | fixed modem initialisation on LtAP mini; |
| userman | fixed compatibility with PayPal TLS 1.2; |
| w60g | do not reset interface after adding comment; |
| watchdog | added "ping-timeout" setting; |
| winbox | show "sector-writes" on devices that have such counters; |
| winbox | show "Switch" menu on hAP ac^2 devices; |
| Component | Change |
|---|---|
| api | properly classify API sessions in log; |
| chr | enabled promiscuous mode (requires to be enabled on host as well) when running CHR on Hyper-V; |
| kidcontrol | added dynamic accept firewall rules to allow bandwidth limit when FastTrack is enabled; |
| led | fixed LED default configuration for LtAP mini; |
| snmp | added "rssi" and "tx-sector-info" value support for w60g type interfaces; |
| snmp | added station "distance", "phy-rate", "rssi" value support for w60g type interfaces; |
| ssh | allow to use "diffie-hellman-group1-sha1" on TILE and x86 devices with "strong-crypto" disabled; |
| w60g | added 4th 802.11ad channel (CLI only); |
| w60g | added distance measurement; |
| w60g | do not reset interface after adding comment; |
| w60g | general stability and performance improvements; |
| w60g | improved maximum achievable distance; |
| w60g | properly report center status under "tx-sector-info"; |
| winbox | show "sector-writes" on ARM devices that have such counters; |
| winbox | show "System/Health" only on devices that have health monitoring; |
| Component | Change |
|---|---|
| console | do not show spare parameters on ping command; |
| crs317 | properly report link state when one link interface is disabled; |
| crs326/crs328 | fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10); |
| crs3xx | fixed flow control; |
| crs3xx | fixed LACP member failover; |
| dhcpv4-client | fixed double ACK packet handling; |
| ethernet | do not show "combo-state" field if interface is not SFP or copper; |
| led | fixed LED default configuration for LtAP mini; |
| lte | added eNB ID to info command; |
| ssh | allow to use "diffie-hellman-group1-sha1" on TILE and x86 devices with "strong-crypto" disabled; |
| supout | added "w60g" section to supout file; |
| watchdog | added "ping-timeout" setting (CLI only); |
| winbox | show "sector-writes" on ARM routers that has such counters; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| Component | Change |
|---|---|
| api | properly classify API sessions in log; |
| bridge | improved performance when bridge VLAN filtering is used without hardware offloading; |
| chr | enabled promiscious mode (requires to be enabled on host as well) when running CHR on Hyper-V; |
| crs317 | fixed Ethernet inteface stuck on 100 Mbps speed; |
| crs328 | fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces; |
| crs3xx | do not report SFP interface as running when interface on opposite side is disabled; |
| dude | fixed client auto upgrade (broken since 6.43rc17); |
| export | do not show w60g password on "hide-sensitive" type of export; |
| log | fixed false log warnings about system status after power on for CRS328-4C-20S-4S+; |
| lte | show UICC in correct format for SXT LTE devices; |
| romon | properly classify RoMON sessions in log and active users list; |
| w60g | improved maximal achievable distance; |
| w60g | properly report center status under "tx-sector-info"; |
| Component | Change |
|---|---|
| bridge | allow to make changes for bridge port when it is interface list; |
| bridge | fixed FastPath for bridge master interfaces (introduced in v6.42); |
| certificate | fixed "add-scep" template existence check when signing certificate; |
| chr | fixed adding MSTI entries; |
| chr | fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V; |
| chr | fixed various network hang scenarios when running CHR on Hyper-V; |
| console | fixed script permissions if script is executed by other RouterOS service; |
| dhcpv4-server | fixed DHCP server that was stuck on invalid state; |
| health | changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+; |
| health | fixed incorrect PSU index for CRS328-4C-20S-4S+; |
| ipsec | improved reliability on IPsec hardware encryption for RB1100Dx4; |
| kidcontrol | fixed dynamically created firewall rules order; |
| led | added "dark-mode" functionality for hEX S and SXTsq 5 ac devices; |
| led | fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58); |
| led | use routers uptime as a starting point when turning off LEDs if option was not enabled on boot; |
| ppp | fixed "hunged up" grammar to "hung up" within PPP log messages; |
| quickset | added missing wireless "channel-width" settings; |
| quickset | added support for "5ghz-a/n" band when CPE mode is used; |
| snmp | added remote CAP count OID for CAPsMAN; |
| snmp | fixed readings for CAPsMAN slave interfaces; |
| supout | added "partitions" section to supout file; |
| usb | properly detect USB 3.0 flash on RBM33G when jumper is removed; |
| userman | improved unique username generation process when adding batch of users; |
| w60g | improved RAM memoy allocation processes; |
| winbox | added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels; |
| winbox | allow to specify full URL in SCEP certificate signing process; |
| winbox | by default specify keepalive timeout value for tunnel type interfaces; |
| winbox | show "scep-url" for certificates; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| winbox | show firmware upgrade message at the bottom of "System/RouterBOARD" menu; |
| wireless | enable all chains by default on devices without external antennas after configuration reset; |
| wireless | improved Nv2 reliability on ARM devices; |