Search changelog entries
| Component | Change |
|---|---|
| branding | improved branding package installation process when another branding package is already installed; |
| chr | enabled support for VMBus protocol version 4.1; |
| chr | improved system stability when running CHR on Hyper-V; |
| crs3xx | fixed hardware offloaded bonding on Ethernet interfaces for CRS354 devices; |
| crs3xx | fixed switch rule "dst-port" parameter for IPv6 traffic on CRS305-1G-4S+, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, netPower 15FR devices; |
| crs3xx | improved system stability when creating multiple hardware offloaded bonding interfaces (introduced in v6.47beta49); |
| crs3xx | show correct switch model for netPower 15FR device; |
| defconf | fixed default IP address assigning on non-paired 60 GHz devices; |
| disk | improved disk management service stability when receiving bogus packets; |
| dns | added support for forwarding DNS queries of static entries to specific server (CLI only); |
| dns | added support for multiple type static entries (CLI only); |
| added support for multiple "to" recipients (CLI only); | |
| graphing | improved graphing service stability when receiving bogus packets; |
| ike1 | do not try to keep phase 2 when purging phase 1; |
| ike2 | added support for RADIUS Disconnect-Request message handling; |
| interface | increased loopback interface MTU to 65536; |
| ipsec | allow specifying two peers for a single policy for failover (CLI only); |
| lora | added "altitude", "latitude" and "longitude" to stat json if GPS is available; |
| lte | improved stability during firmware upgrade process; |
| routerboard | added "hold-time" parameter to mode-button menu (CLI only); |
| routerboard | added "reset-button" menu - custom command execution with reset button (CLI only); |
| snmp | fixed "ifSpeed" reporting for tunnel interfaces; |
| ssh | improved SSH service stability when receiving bogus packets; |
| switch | correctly display switch statistics when all switch ports are disabled on RTL8367 switch chip; |
| switch | fixed missing switch statistics (introduced in v6.47beta49); |
| user | improved user management service stability when receiving bogus packets; |
| webfig | fixed WinBox download link; |
| webfig | fixed skin usage from branding package; |
| winbox | added "bus" parameter for "USB Power Reset" command on RBM33G; |
| winbox | allow to specify any ethernet like interface under "Tool/WoL" menu; |
| winbox | fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces; |
| winbox | fixed memory leak (introduced in v6.46.4); |
| winbox | fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac"; |
| winbox | increased limit of multi-entry fields to 100; |
| winbox | limit number of simultaneous WinBox sessions to 5 for users without "write" permission; |
| wireless | improved management service stability when receiving bogus packets; |
| wireless | updated "south africa" regulatory domain information; |
| Component | Change |
|---|---|
| capsman | fixed "certificate" parameter updating on CAP; |
| console | prevent incorrect type interfaces appearing in command hints; |
| crs3xx | fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices; |
| crs3xx | fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices; |
| crs3xx | improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device; |
| discovery | do not send CDP and LLDP packets on interfaces that does not have MAC address; |
| dude | fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4); |
| ike1 | rekey phase 1 rekeying as responder for Windows initiators; |
| ipsec | improved system stability when handling fragmented packets; |
| led | added "dark-mode" functionality for CRS105-5S-FB; |
| lora | added IPv6 support for LoRa packet forwarder; |
| lora | added UTC timestamp for RX events in "rxpk" json; |
| lora | added value limits for "freq-off" parameter; |
| lora | properly update source address for packets when routing table is changed; |
| lte | fixed IP type selection from APN on RBSXTLTE3-7; |
| sniffer | fixed minor typo in "host" menu; |
| supout | added "gps" section to supout files; |
| supout | improved PoE-out information reporting; |
| system | improved kernel panic reporting in logs after reboot; |
| system | improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43); |
| traceroute | improved stability when invalid packet is received; |
| traffic-generator | improved statistics reporting; |
| w60g | improved stability after multiple disconnections; |
| winbox | added "Options" parameter support for DHCPv6 client and server; |
| winbox | added 160Mhz extension channel support for CAPsMAN; |
| winbox | added support for "Tools->WoL" menu; |
| winbox | allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter; |
| winbox | do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision; |
| winbox | fixed "ARP" parameter inheritance from "CAPs Configuration" configuration; |
| winbox | fixed "Bands" parameter display for LTE interfaces; |
| winbox | fixed "DSCP" parameter value setting; |
| winbox | fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration; |
| winbox | fixed "Passthr. MAC Address" parameter display "LTE APNs" menu; |
| winbox | fixed "Switch" menu on CRS354-48P-4S+2Q+; |
| winbox | fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu; |
| winbox | fixed automatic "IPv6->Firewall->Address List" table update; |
| winbox | made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry; |
| winbox | properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu; |
| winbox | renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs"; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| wireless | added "U-NII-2" support for hAP ac2 and RBwAPGR series devices; |
| wireless | added "skip-dfs-channels" parameter; |
| wireless | fixed default "antenna-gain" setting on SXT 2 and LtAP series devices; |
| wireless | updated "bangladesh" regulatory domain information; |
| wireless | updated "indonesia4" regulatory domain information; |
| Component | Change |
|---|---|
| branding | do not ask to confirm configuration applied from branding package; |
| certificate | added "skid" and "akid" values for detailed print; |
| certificate | allow dynamic CRL removal; |
| console | prevent incorrect type interfaces appearing in command hints; |
| crs3xx | fixed QSFP interface linking after removing/inserting QSFP module (introduced in v6.47beta49); |
| dhcpv4-server | disallow zero lease-time setting; |
| filesystem | fixed NAND memory going into read-only mode or becoming unstable over time; |
| ike1 | improved policy lookup with specific protocol; |
| ike1 | rekey phase 1 rekeying as responder for Windows initiators; |
| ipsec | improved system stability when handling fragmented packets; |
| kidcontrol | ignore IPv6 multicast MAC addresses; |
| lora | added IPv6 support for LoRa packet forwarder; |
| lora | added UTC timestamp for RX events in "rxpk" json; |
| lte | added support for Huawei K5161 modem; |
| lte | fixed IP type selection from APN on RBSXTLTE3-7; |
| snmp | fixed multiple LTE interface OID reporting; |
| system | improved kernel panic reporting in logs after reboot; |
| wireless | added "russia 6ghz" regulatory domain information; |
| wireless | added "skip-dfs-channels" parameter; |
| wireless | updated "bangladesh" regulatory domain information; |
| wireless | updated "russia4" regulatory domain information; |
| Component | Change |
|---|---|
| branding | fixed identity setting from branding package; |
| branding | properly use HTML files for Hotspot (introduced in v6.47beta); |
| bridge | added warning message when port is dynamically added to entry with VLAN range (CLI only); |
| bridge | correctly remove disabled MSTI; |
| bridge | improved hardware offloading enabling/disabling; |
| capsman | fixed "certificate" parameter updating on CAP; |
| certificate | disabled CRL usage by default; |
| certificate | do not use SSL for first CRL update; |
| chr | added support for file system quiescing; |
| crs3xx | do not change bridge host ID's when updating host table (introduced in v6.47beta32); |
| crs3xx | fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices; |
| crs3xx | fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices; |
| dhcpv4 | added end option (255) validation for both server and client; |
| dhcpv4-client | improved stability when changing client while still receiving advertisements; |
| dhcpv6-server | fixed MAC address retrieving from DUID when timestamp is present; |
| dude | fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4); |
| filesystem | fixed NAND memory going into read-only mode or becoming unstable over time; |
| hotspot | updated splash page design ('/ip hotspot reset-html' required); |
| ike1 | added error message when specifying "my-id" for XAuth Identity; |
| ike1 | improved stability when performing policy lookup on non-existant peer; |
| ipsec | control CRL validation with global "use-crl" setting; |
| ipsec | do full certificate validation for identities with explicit certificate; |
| lcd | fixed LCD service becoming unavailable on devices without LCD screen; |
| led | added "dark-mode" functionality for CRS105-5S-FB; |
| led | fixed minor typo in LED warning message; |
| lora | added IPv6 support for LoRa packet forwarder; |
| lora | added value limits for "freq-off" parameter; |
| lora | properly update source address for packets when routing table is changed; |
| lte | added support for NEOWAY N720; |
| lte | fixed "allow-roaming" setting when using LTE network mode on R11e-LTE; |
| lte | made "mac-address" parameter read-only; |
| ppp | added support for ZTE MF90; |
| ppp | fixed minor typo when running "info" command; |
| proxy | increased minimal free RAM that can not be used for proxy services; |
| quickset | do not show "SINR" field in Quick Set when there is no data; |
| quickset | removed "EARFCN" field from Quick Set; |
| route | improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached; |
| sniffer | fixed minor typo in "host" menu; |
| snmp | changed "upsEstimatedMinutesRemaining" reported value from seconds to minutes; |
| ssh | fixed SHA256 user authentication algorithm checking (introduced in v6.46.4); |
| supout | added "gps" section to supout files; |
| switch | made "auto" the default value for "vlan-id" parameter when creating a new static host entry; |
| system | improved driver loading speed on startup; |
| system | improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43); |
| traffic-generator | improved statistics reporting; |
| w60g | fixed link status logging; |
| w60g | improved rate selection in low traffic conditions; |
| winbox | added "Options" parameter support for DHCPv6 client and server; |
| winbox | added "Rate" parameter for switch ACL rules; |
| winbox | added 160Mhz extension channel support for CAPsMAN; |
| winbox | added comment support for "Switch->VLAN" menu; |
| winbox | added support for "Tools->WoL" menu; |
| winbox | aligned all "IP->Traffic Flow->IPFIX" check boxes in single line (WinBox v3.22 required); |
| winbox | allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter; |
| winbox | allow setting "Primary" parameter for "balance-tlb" bonding interfaces; |
| winbox | do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision; |
| winbox | fixed "ARP" parameter inheritance from "CAPs Configuration" configuration; |
| winbox | fixed "BGP Origin" value display under "IPv6->Routes" menu; |
| winbox | fixed "Bands" parameter display for LTE interfaces; |
| winbox | fixed "DSCP" parameter value setting; |
| winbox | fixed "Data Rate" checkbox alignment (WinBox v3.22 required); |
| winbox | fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration; |
| winbox | fixed "Passthr. MAC Address" parameter display "LTE APNs" menu; |
| winbox | fixed "Switch" menu on CRS354-48P-4S+2Q+; |
| winbox | fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu; |
| winbox | fixed automatic "IPv6->Firewall->Address List" table update; |
| winbox | fixed bonding type interface support for "Switch->Host" table; |
| winbox | made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry; |
| winbox | made "yes" the default value for "Inject Summary LSAs" parameter when creating a new NSSA or STUB area; |
| winbox | properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu; |
| winbox | renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs"; |
| winbox | renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu; |
| winbox | show "Hardware Offload" parameter for bonding interfaces; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| winbox | updated icon design; |
| wireless | added "U-NII-2" support for hAP ac2 and RBwAPGR series devices; |
| wireless | enabled unicast flood for DHCP traffic on ARM architecture access points; |
| wireless | fixed default "antenna-gain" setting on SXT 2 and LtAP series devices; |
| wireless | updated "indonesia4" regulatory domain information; |