Component: general
157 changelog entries across 55 version(s)
Releases by channel (stacked)
- system – added new "switch-marvell" and "wifi-mediatek" packages to support upcoming products;
- vxlan -improved system stability when using IPv6 VTEP;
- mpls- fixed LDP "preferred-afi" parameter;
- factory only release;
- l2tp: implemented PPPoE over L2TP in LNS mode, RFC3817;
- ovpn: support OpenWRT ovpn clients (or any other with enable-small option enabled);
- upnp: automatically adjust mappings to new external ip change;
- ppp, pptp, l2tp, pppoe: fixed router dead locked if compression was enabled on link;
- pptp,l 2tp, sstp, pppoe: do not send data packets before we have negotiated connection with other side (happens on dial-on-demand interfaces), this brakes when connecting to other party servers;
- revised change that caused reboot by watchdog problems introduced in v6.31;
- certificates -fixed bug where crl stopped working after a while;
- Dynamic DNS servers can disappear when "allow-remote-requests" are not enabled
- Dynamic DNS servers can disappear when "allow-remote-requests" are not enabled
- trafflow: fix in-interface reporting in flow;
- fixed :execute file=
- bonding: fix arp monitoring in active backup mode
- fixed encryption 'out of order' problem on SMP systems;
- fixed router lockup on leap seconds with installed ntp package;
- fixed file transfer on devices with large RAM memory;
- pptp & l2tp & sstp client: support the case were server issues its tunnel ip address the same as its public one;
- removed wireless package from routeros bundle package, new wireless-fp is left in place and wireless-cm2 added as option;
- pptp & l2tp client: when adding default route, add special exception route for a tunnel itself (no need to add it manually anymore);
- improved connection list: added connection packet/byte counters, added separate counters for fasttrack, added current rate display, added flag wheather connection is fasttracked/srcnated/dstnated, removed 2048 connection entry limit;
- fixed memory leak on CCR devices (introduced in 6.28);
- added ~fasttrack-connection~ firewall action in filter/mangle tables for marking connections as fasttrack;
- trafflow: add natted addrs/ports to ipv4 flow info;
- tilegx: enable autoneg for sfp ports in netinstall;
- fixed async. ppp server;
- queue tree: some queues would stop working after some configuration changes;
- fixed CRS226 10G ports could lose link (introduced in 6.28);
- fixed FREAK vulnerability in SSL & TLS;
- improved support for new hEX lite;
- added support for SiS 190/191 PCI Ethernet adapter;
- made metarouter work on boards with 802.11ac support or usb LTE;
- make fat32 disk formatting support disks bigger than 134GiB;
- added basic counters for ipv4/bridge fast path, also show status wether fast path is active at all;
- initial RoMon (Router Management Overlay Network) support added.
- check-installation: fixed wrong kernel crc on powerpc boards
- watchdog: fix software watchdog for x86
- CCR improvements in link detection for SFP/SFP+ and auto-negotiation for SFP interfaces;
- improved boot times;
- mpls/vpls have improved per core balancing on CCRs;
- fixed queue tree no-mark matching (was broken since 6.24);
- fixed nested simple queues (was broken since 6.24);
- fixed occasional crash when ipv6 was used;
- fixed route cache overflow (ipv4/ipv6 stops working) if ipsec is used;
- fixed Omnitik upgrade from v5 where wireless config was not correctly saved
- fixed Webfig Design Skin where some skin changes were not saved
- WPS support added to CM2 wireless package
- fixed problem where some of ethernet cards do not work on x86;
- improved CCR ethernet driver (less dropped packets);
- improved queue tree parent=global performance (especially on SMP systems and CCRs);
- eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have improved per core balancing on CCRs;
- fixed tx for 6to4 tunnels with unspecified dst address;
- fixed problem where some of ethernet cards do not work on x86;
- made powerpc metarouters work again (were broken in v6.22);
- using routing-marks could lead to tunnel loop detection to turn off tunnels;
- eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have new features: tunnels go down when no route to destination; tunnels go down for 1 minute when transmit loop detected, warning gets logged; new keepalive-retries setting; keepalives enabled by default for new tunnels (10sec interval, 10 retries);
- 100% CPU load caused by DNS service fixed;
- 100% CPU load caused by unclassified services fixed;
- 6to4 tunnel fixed;
- new RouterBOOT firmware for Metal 2SHPn to improve wireless stability;
- fixed ugprading from v5;
- fixed 6to4 tunnels having inactive routes;
- interfaces report last link up/down time and link down count;
- stores are replaced with folders and disks are now managed under /disk menu;
- added support for SMSC750x USB Gigabit Ethernet on x86;
- eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have new features: auto mtu (enabled by default for new tunnels); dscp (inherit/specific value, inherit by default for new tunnels); clamp-tcp-mss (yes by default for new tunnels);
- eoip/gre/ipip/6to4 tunnels have dont-fragment option (inherit/no, no by default for new tunnels);
- bridge has auto mtu feature (enabled by default for new bridges);
- pppoe-server has auto mtu feature (enabled by default for new pppoe servers);
- simple queue performance optimisation/improvement for multi-core RouterOS devices (especially CCR)
- bridge setups sometimes could crash on CCR devices;
- fixed port flapping in 1G mode on sfp-sfpplus1 on CRS226;
- fixed SXT ac model losing it's interface if changing regulatory settings in "routerboard" menu