Search changelog entries
| Component | Change |
|---|---|
| branding | fixed missing branding skins if "skins" folder does not exist; |
| bridge | added MAC and IP source addresses information for DHCP snooping log; |
| bridge | fixed "vlan-encap" setting for filter and NAT rules; |
| bridge | improved system stability when using IGMP snooping and changing bridge MAC address; |
| capsman | use Bits instead of Bytes for "ap-tx-limit" and "client-tx-limit" parameters; |
| crs3xx | fixed unknown multicast flood to CPU when IGMP snooping is used; |
| crs3xx | improved system stability when increasing interface L2MTU for CRS318 devices; |
| defconf | fixed default configuration loading on LHG R; |
| defconf | fixed minor typo in configuration description; |
| dhcpv6-server | fixed false missing IPv6 Pool warning for dynamic bindings; |
| dns | fixed CNAME query when target record is not in cache; |
| dns | fixed cache memory leak when resolving CNAME domains; |
| health | fixed voltage monitor on BaseBox5 devices; |
| health | improved temperature reporting; |
| ike2 | added "MS-CHAP-Domain" attribute to RADIUS requests; |
| leds | fixed "/system leds" menu on RBLHG-2nD; |
| lora | added additional predefined network servers; |
| lte | added support for Sharp 809SH; |
| routerboard | fixed "reset-button" on hAP ac; |
| system | improved stability when receiving bogus packets; |
| telnet | fixed "routing-table" parameter usage; |
| w60g | improved stability in low temperature environments; |
| webfig | do not show "units" twice in multi list entries; |
| winbox | added "Cloud Backup" options under "Files" menu; |
| winbox | added "interworking-profile" parameter under "Wireless" menu; |
| winbox | added support for PTP; |
| winbox | do not show "Functionality" field for LTE interface if it is not provided; |
| winbox | fixed "Switch" menu on RBwAPG; |
| winbox | fixed "vid" parameter under "Bridge/Hosts" menu; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| wireless | added U-NII-2 support for US and Canada country profiles for hAP ac^3; |
| wireless | added U-NII-2 support for US and Canada country profiles for hap ac, hAP ac^3 LTE6, Audience and Audience LTE6; |
| wireless | updated "israel" regulatory domain information; |
| Component | Change |
|---|---|
| bridge | fixed external flag in the host table for wireless clients; |
| capsman | use Bits instead of Bytes for "ap-tx-limit" and "client-tx-limit" parameters; |
| crs3xx | fixed jumbo frame forwarding for CRS354 devices (introduced in v6.49beta36); |
| crs3xx | fixed unknown multicast flood to CPU when IGMP snooping is used; |
| crs3xx | improved system stability when increasing interface L2MTU for CRS318 devices; |
| defconf | apply default configuration from branding package when performing reset with button; |
| defconf | fixed default configuration loading on LHG R; |
| health | fixed voltage monitor on BaseBox5 devices; |
| ike2 | added "MS-CHAP-Domain" attribute to RADIUS requests; |
| ike2 | added support for ASN.1 DN "my-id" value setting for initiators; |
| ike2 | check if TS is still valid after obtaining SPI; |
| ipsec | improved SA update by SPI; |
| leds | fixed "/system leds" menu on RBLHG-2nD; |
| lora | added channel plan "il-917" for Israel; |
| lte | added support for Sharp 809SH; |
| m33g | improved support for "/system gpio" menu ("/system routerboard upgrade" required); |
| sfp | improved 25Gbps optical module stability and linking; |
| snmp | added "engine-id" OID support; |
| snmp | fixed "ipNetToMediaType" OID for incomplete entries; |
| ssh | fixed "undo" functionality; |
| system | improved stability when receiving bogus packets; |
| telnet | fixed "routing-table" parameter usage; |
| tr069-client | added support for Ethernet link speed reporting; |
| tr069-client | added support for interface comment reporting and editing; |
| tr069-client | added support for supout file upload; |
| tr069-client | improved stability for download/upload diagnostics; |
| ups | added battery info for APC Back-UPS BX750MI; |
| w60g | general stability and performance improvements; |
| webfig | added support for logo image from branding package; |
| winbox | added "Cloud Backup" options under "Files" menu; |
| winbox | added "interworking-profile" parameter under "Wireless" menu; |
| winbox | added "name" and "file-name" parameter when importing and exporting certificates; |
| winbox | added "sfp-shutdown-temperature" setting to SFP interfaces; |
| winbox | added SSH settings under "IP/SSH" menu; |
| winbox | added TFTP settings under "IP/TFTP/Settings" menu; |
| winbox | allow setting MCS (24-31) to 4x4 Wireless interfaces; |
| winbox | do not allow to set empty "init-string" field under "System/GPS" menu; |
| winbox | do not show "Functionality" field for LTE interface if it is not provided; |
| winbox | do not show "GPS antenna" selection for devices without selection support; |
| winbox | fixed "Secondary Frequency" parameter setting under "CAPsMAN/Channel" menu; |
| winbox | fixed "Switch" menu on RBwAPG; |
| winbox | fixed DNS "cache-size" parameter setting; |
| winbox | fixed order of weekdays under "IP/Firewall" menu; |
| winbox | match "MAC Protocol-Num" predefined values under "Bridge/Filters" menu; |
| winbox | properly show "CRL Signature" field under "System/Certificate" menu; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| winbox | show IPv6 address in separate field under "IP/Cloud" menu; |
| wireless | added override for multicast-to-unicast translation of DHCP traffic; |
| wireless | added U-NII-2 support for US and Canada country profiles for hAP ac^3; |
| Component | Change |
|---|---|
| bonding | improved system stability when disabling/enabling bonding ports; |
| branding | added option to upload custom files (newly generated branding package required); |
| capsman | use proper units for "ap-tx-limit" and "client-tx-limit" parameters; |
| console | do not clear environment values if any global variable is set; |
| console | require "write+ftp" permissions for exporting configuration to file; |
| console | updated copyright notice; |
| crs3xx | added "/system swos" menu for CRS354 devices, should only be used after SwOS 2.13 release; |
| crs3xx | fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices; |
| crs3xx | improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices; |
| crs3xx | improved system stability when receiving large frames on CPU for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices; |
| defconf | fixed default configuration loading on LHG R; |
| defconf | fixed default configuration loading on RBOmniTikPG-5HacD; |
| dhcp | fixed link state checking for DHCP client; |
| dude | fixed configuration menu presence on ARM64 devices; |
| ethernet | improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices; |
| ipsec | fixed SA address parameter exporting; |
| lte | fixed "earfcn" to band translation for "cell-monitor"; |
| ovpn | fixed route cache entry leak when establishing a new session; |
| poe | do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out; |
| ppp | do not fail "at-chat" command when issued on disabled PPP interface; |
| ptp | improved management service stability when receiving bogus packets; |
| quickset | prefer 5GHz interface for WiFi scan in CPE mode; |
| rb4011 | fixed SFP+ port MTU setting after link state change; |
| rb4011 | improved SFP+ port stability after boot-up; |
| route | improved stability when connected route is modified; |
| sfp | improved cable length monitoring as defined per SFF-8472 and SFF-8636; |
| supout | fixed "topic" column presence in "Log" section; |
| switch | improved system stability with 98PX1012 switch chip for CCR2004-1G-12S+2XS device; |
| system | improved resource allocation (improves several service stability e.g. HTTPS, PPPoE, VPN); |
| telnet | do not send options if connecting to non standard port; |
| telnet | fixed server when run on non standard port; |
| tile | fixed bridge performance degradation (introduced in v6.47); |
| tr069-client | improved management service stability when receiving bogus packets; |
| upgrade | improved "long-term" upgrade procedure on SMIPS devices; |
| webfig | allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu; |
| webfig | do not corrupt settings when starting "Wireless Sniffer"; |
| webfig | do not move top right menu in opposite direction when scrolling horizontally; |
| webfig | show "network-mode" for LTE modems that support it; |
| winbox | do not show "network-mode" parameter for LTE interfaces that do not support it; |
| winbox | do not show empty "CPU Frequency" parameter under "System/Resources" menu; |
| winbox | fixed "reachable-time" value unit under "IPv6/ND" menu; |
| winbox | fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu; |
| winbox | fixed health reporting on RB960, hEX and hEX S devices; |
| winbox | hide "Allow Roaming" parameter on LTE modems that do not support it; |
| winbox | increased "target" field limit to 128 under "Queues" menu; |
| winbox | show "LCD" only on boards that have LCD; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| winbox | show "activity" column by default under "IP/Kid Control/Devices" menu; |
| wireless | fixed issue with multicast traffic delivery to client devices using power-save; |
| wireless | improved iOS compatibility with HotSpot 2.0 networks; |
| www | added "X-Frame-Options" header information to disallow website embedding in other pages; |
| Component | Change |
|---|---|
| branding | added option to upload custom files (newly generated branding package required); |
| console | do not clear environment values if any global variable is set; |
| crs3xx | fixed Ethernet LEDs after reboot for CRS354 devices; |
| crs3xx | fixed VLAN priority removal for CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices; |
| crs3xx | fixed port-isolation on bonding interfaces for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices; |
| crs3xx | improved LACP linking between CRS3xx series switches; |
| crs3xx | improved system stability when receiving large frames on CPU for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices; |
| defconf | fixed default configuration loading on RBOmniTikPG-5HacD; |
| dot1x | fixed "reject-vlan-id" for MAC authentication (introduced in v6.48); |
| dot1x | fixed MAC authentication fallback (introduced in v6.48); |
| ipsec | fixed SA address parameter exporting; |
| lte | fixed "earfcn" to band translation for "cell-monitor"; |
| package | added new "iot" package with Bluetooth (KNOT only) and MQTT publisher support; |
| rb4011 | fixed SFP+ port MTU setting after link state change; |
| rb4011 | improved SFP+ port stability after boot-up; |
| route | improved stability when connected route is modified; |
| sfp | improved cable length monitoring as defined per SFF-8472 and SFF-8636; |
| ssh | return proper error code from executed command; |
| system | improved resource allocation (improves several service stability e.g. HTTPS, PPPoE, VPN); |
| tile | fixed bridge performance degradation (introduced in v6.47); |
| webfig | fixed "PortMapping" button (introduced in v6.48.2); |
| winbox | fixed health reporting on RB960, hEX and hEX S devices; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| wireless | fixed issue with multicast traffic delivery to client devices using power-save; |
| wireless | improved iOS compatibility with HotSpot 2.0 networks; |
| www | added "X-Frame-Options" header information to disallow website embedding in other pages; |
| Component | Change |
|---|---|
| crs3xx | fixed packet forwarding on 1Gbps Ethernet interfaces for CRS354 devices (introduced in v6.49beta44); |
| dns | fixed CNAME query when target record is not in cache; |
| winbox | fixed health reporting on RB960, hEX, hEX S and hAP ac3 devices; |