|
arp
|
properly update dynamic ARP entries after interface related changes; |
|
bonding
|
fixed 802.3ad mode on RB1100AHx4; |
|
bonding
|
improved reliability on bonding interface removal; |
|
console
|
fixed different command auto complete; |
|
crs1xx/2xx
|
fixed 1 Gbps forced mode for several SFP modules; |
|
crs317
|
added L2MTU support; |
|
crs3xx
|
improved packet processing in slowpath; |
|
dhcp
|
fixed downgrade from RouterOS v6.41 or higher; |
|
dhcpv4-server
|
fixed lease renew for DHCP clients that sends renewal with "ciaddr = 0.0.0.0"; |
|
dhcpv6-client
|
do not run DHCPv6 client when IPv6 package is disabled; |
|
dhcpv6-client
|
fixed IA evaluation order; |
|
dhcpv6-client
|
require pool name to be unique; |
|
dhcpv6-server
|
do not release address of static binding from pool after server removal; |
|
discovery
|
fixed timeouts for LLDP neighbours; |
|
ethernet
|
fixed occasional broken interface order after reset/first boot; |
|
ethernet
|
fixed rare linking problem with forced 10Mbps full-duplex mode; |
|
export
|
fixed export for PoE-OUT related settings; |
|
export
|
fixed wireless "ssid" and "supplicant-identity" compact export; |
|
fasttrack
|
fixed fasttrack over interfaces with dynamic MAC address; |
|
firewall
|
fixed bridge "action=log" rules; |
|
firewall
|
fixed crash on fasttrack dummy rule manual change attempt; |
|
firewall
|
properly remove "address-list" entry after timeout ends; |
|
firewall
|
removed unique address list name limit; |
|
hAP ac lite
|
removed nonexistent "wlan-led"; |
|
hotspot
|
improved user statistics collection process; |
|
hotspot
|
require "dns-name" to contain "." symbol under Hotspot Server Profile configuration; |
|
ike1
|
fixed initiator ID comparison to NAT-OA; |
|
interface
|
improved interface state change handling when multiple interfaces are affected at the same time; |
|
ipsec
|
do not deduct "dst-address" from "sa-dst-address" for "/0" policies; |
|
ipv6
|
fixed IPv6 address request from pool; |
|
metarouter
|
fixed display of bogus error message on startup; |
|
ntp-client
|
properly start NTP client after reboot if manual server IP is not configured; |
|
ovpn
|
added support for "push-continuation"; |
|
ovpn
|
added support for topology subnet for IP mode; |
|
ovpn
|
fixed duplicate default gateway presence when receiving extra routes; |
|
ovpn
|
improved performance when receiving too many options; |
|
ping
|
fixed ping getting stuck (after several thousands of ping attempts); |
|
ppp
|
fixed non-standart PAP or CHAP packet handling; |
|
pppoe-client
|
fixed incorrectly formed PADT packet; |
|
pppoe-client
|
fixed wrong MRU detection over VLAN interfaces; |
|
proxy
|
fixed rare program crash after closing client connection; |
|
quickset
|
fixed incorrect VPN address value on arm and tilera; |
|
rb1100ahx4
|
fixed HW acceleration fragmented packet decryption when fragment is smaller than 64 bytes; |
|
rb1100ahx4
|
fixed startup problems (requires additional reboot after upgrade); |
|
rb2011
|
fixed possible LCD blinking along with ethernet LED; |
|
rb3011
|
fixed packet passthrough on switch2 while booting; |
|
rb922
|
restored missing wireless interface on some boards; |
|
safe-mode
|
fixed session handling when Safe Mode is used on multiple sessions at the same time; |
|
sfp
|
fixed invalid temperature readings when ambient temperature is below 0C; |
|
sfp
|
fixed OPTON module DDM information readings; |
|
sfp
|
fixed temperature readings for various SFP modules; |
|
sniffer
|
do not skip L2 packets when "all" interface mode was used; |
|
snmp
|
fixed "/caps-man registration-table" uptime values; |
|
snmp
|
fixed "/system license" parameters for CHR; |
|
snmp
|
fixed "/system resource cpu print oid"; |
|
snmp
|
fixed crash on interface table get; |
|
ssh
|
do not execute command if it starts with "-" symbol; |
|
supout
|
fixed IPv6 firewall section; |
|
switch
|
fixed multicast forwarding on CRS326; |
|
tile
|
fixed copying large amount of text over serial console; |
|
tile
|
improved reliability on MPLS package processing; |
|
traffic-flow
|
fixed reboots when IPv6 address has been set as target address without active IPv6 package; |
|
trafficgen
|
fixed "lost-ratio" showing incorrect statistics after multiple sequences; |
|
userman
|
do not send disconnect request for user when "simultaneous session limit reached"; |
|
userman
|
fixed "limitation" and "profile-limitation" update; |
|
userman
|
fixed CoA packet processing after changes in "/tool user-manager router" configuration; |
|
userman
|
lookup language files also in "/flash" directory; |
|
vlan
|
do not allow VLAN MTU to be higher than L2MTU; |
|
vlan
|
do not delete existing VLAN interface on "failure: already have such vlan"; |
|
webfig
|
allow to unset "rate-limit" for DHCP leases; |
|
webfig
|
fixed wireless "scan-list" parameter not being saved after applying changes; |
|
webfig
|
improved reliability of login process; |
|
winbox
|
added possibility to define "comment" for "/routing bgp network" entries; |
|
winbox
|
added support for certificate CRL list; |
|
winbox
|
do not show LCD menu for devices which does not have it; |
|
winbox
|
fixed ARP table update after entry changes state to incomplete; |
|
winbox
|
hide "level" and "tunnel" parameters for IPSec policy templates; |
|
winbox
|
hide FAN speed if it is 0RPM; |
|
winbox
|
make IPSec policies table an ordered list; |
|
winbox
|
properly show "dhcp-server" warnings; |
|
winbox
|
show "/interface wireless cap print" warnings; |
|
winbox
|
show "/system health" only on boards that have health monitoring; |
|
winbox
|
show "D" flag under "/interface mesh port" menu; |
|
wireless
|
added "etsi1" and "russia3" regulatory domain information; |
|
wireless
|
fixed compatibility with "AR5212" wireless chips; |
|
wireless
|
improved WPA2 key exchange reliability; |
|
wireless
|
updated "china", "norway" and "new-zealand" regulatory domain information; |