Search changelog entries
| Component | Change |
|---|---|
| bridge | fixed IPv6 link-local address generation when auto-mac=yes; |
| capsman | fixed "group-key-update" parameter not using correct units; |
| console | properly remove system note after configuration reset; |
| crs3xx | improved data transmission between 10G and 1G ports; |
| dhcpv4-server | fixed dynamic lease reuse after expiration; |
| dhcpv6-server | properly handle DHCP requests that include prefix hint; |
| ethernet | fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices; |
| gps | added "coordinate-format" parameter; |
| led | fixed default LED configuration for RBMetalG-52SHPacn; |
| led | fixed PWR-LINE AP ethernet led polarity ("/system routerboard upgrade" required); |
| lte | disallow setting LTE interface as passthrough target; |
| lte | fixed DHCP IP acquire (introduced in v6.43.7); |
| lte | fixed passthrough functionality when interface is removed; |
| lte | increased reported "rsrq" precision; |
| lte | reset USB when non-default slot is used; |
| package | use bundled package by default if standalone packages are installed as well; |
| resource | fixed "total-memory" reporting on ARM devices; |
| snmp | added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values; |
| switch | fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips; |
| system | fixed situation when all configuration was not properly loaded on bootup; |
| timezone | fixed "Europe/Dublin" time zone; |
| upgrade | automatically uninstall standalone package if already installed in bundle; |
| webfig | do not show bogus VHT field in wireless interface advanced mode; |
| winbox | added "allow-roaming" parameter in "Interface/LTE" menu; |
| winbox | allow to change VHT rates when 5ghz-n/ac band is used; |
| winbox | renamed "Radius" to "RADIUS"; |
| winbox | show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+; |
| wireless | added new "installation" parameter to specify router's location; |
| wireless | improved stability for 802.11ac; |
| wireless | improvements in wireless frequency selection; |
| Component | Change |
|---|---|
| capsman | fixed "group-key-update" parameter not using correct units; |
| certificate | properly flush old CRLs when changing store location; |
| console | properly remove system note after configuration reset; |
| dhcpv6-server | properly handle DHCP requests that include prefix hint; |
| discovery | fixed malformed neighbor information for routers that has incomplete IPv6 configuration; |
| discovery | fixed neighbor discovery for PPP interfaces; |
| export | fixed "silent-boot" compact export; |
| gps | added "coordinate-format" parameter; |
| interface | improved system stability when including/excluding a list to itself; |
| kidcontrol | do not allow users with "read" policy to pause and resume kids; |
| led | fixed default LED configuration for RBMetalG-52SHPacn; |
| log | properly handle long echo messages; |
| lte | added support for more ZTE MF90 modems; |
| lte | disallow setting LTE interface as passthrough target; |
| package | use bundled package by default if standalone packages are installed as well; |
| resource | fixed "total-memory" reporting on ARM devices; |
| snmp | added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values; |
| snmp | do not initialise interface traps on bootup if they are not enabled; |
| switch | fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips; |
| system | fixed situation when all configuration was not properly loaded on bootup; |
| timezone | fixed "Europe/Dublin" time zone; |
| upgrade | automatically uninstall standalone package if already installed in bundle; |
| webfig | do not show bogus VHT field in wireless interface advanced mode; |
| winbox | allow to change VHT rates when 5ghz-n/ac band is used; |
| winbox | renamed "Radius" to "RADIUS"; |
| winbox | show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+; |
| wireless | added new "installation" parameter to specify router's location; |
| wireless | improved stability for 802.11ac; |
| wireless | improvements in wireless frequency selection; |
| Component | Change |
|---|---|
| bgp | properly update keepalive time after peer restart; |
| bridge | fixed BOOTP packet forwarding when DHCP Snooping is enabled; |
| bridge | fixed IPv6 link-local address generation when auto-mac=yes; |
| capsman | always accept connections from loopback address; |
| certificate | added support for multiple "Subject Alt. Names"; |
| cloud | added "ddns-update-interval" parameter; |
| conntrack | added new "loose-tcp-tracking" parameter (equivalent to "nf_conntrack_tcp_loose" in netfilter); |
| console | properly remove system note after configuration reset; |
| crs3xx | improved fan control stability; |
| crs3xx | improved stability when adding ACL rules on CRS326 and CRS328 devices (introduced in 6.44beta39); |
| defconf | fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN; |
| defconf | fixed IPv6 link-local address range in firewall rules; |
| dhcp | added "allow-dual-stack-queue" setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour; |
| dhcpv4-server | added "parent-queue" parameter (CLI only); |
| dhcpv6-server | properly handle DHCP requests that include prefix hint; |
| discovery | detect proper slave interface on bounded interfaces; |
| discovery | fixed malformed neighbor information for routers that has incomplete IPv6 configuration; |
| discovery | send master port in "interface-name" parameter; |
| discovery | show neighbors on actual bridge port instead of bridge itself for LLDP; |
| ethernet | fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices; |
| export | fixed "silent-boot" compact export; |
| fetch | added "http-header-field" parameter; |
| gps | added "coordinate-format" parameter (CLI only); |
| ike2 | allow to match responder peer by "my-id=fqdn" field; |
| ipsec | improved invalid policy handling when a valid policy is uninstalled; |
| kidcontrol | added IPv6 support; |
| kidcontrol | added statistics web interface for kids (http://router.lan/kid-control); |
| led | fixed default LED configuration for RBMetalG-52SHPacn; |
| lte | added "ecno" field for "info" command; |
| lte | disallow setting LTE interface as passthrough target; |
| lte | fixed passthrough functionality when interface is removed; |
| lte | improved SimCom 7100e support; |
| lte | increased reported "rsrq" precision; |
| lte | reset USB when non-default slot is used; |
| package | use bundled package by default if standalone packages are installed as well; |
| ppp | added "at-chat" command; |
| resource | fixed "total-memory" reporting on ARM devices; |
| snmp | added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values; |
| snmp | changed fan speed value type to Gauge32; |
| snmp | removed "rx-sector" ("Wl60gRxSector") value; |
| ssh | fixed public key format compatibility with RFC4716; |
| switch | fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips; |
| system | fixed situation when all configuration was not properly loaded on bootup; |
| timezone | fixed "Europe/Dublin" time zone; |
| traceroute | improved stability when sending large ping amounts; |
| upgrade | automatically uninstall standalone package if already installed in bundle; |
| user | require "write" permissions for LTE firmware update; |
| watchdog | allow specifying DNS name for "send-smtp-server" parameter; |
| webfig | do not show bogus VHT field in wireless interface advanced mode; |
| winbox | added "allow-roaming" parameter in "Interface/LTE" menu; |
| winbox | added "challenge-password" field when signing certificate with SCEP; |
| winbox | added "conflict-detection" parameter in "IP/DHCP server" menu; |
| winbox | added src/dst address and in/out interface list columns to default firewall menu view; |
| winbox | added support for dynamic devices in "IP/Kid Control/Devices" tab; |
| winbox | allow to change VHT rates when 5ghz-n/ac band is used; |
| winbox | fixed missing w60g interface status values; |
| winbox | renamed "Radius" to "RADIUS"; |
| winbox | show "R" flag under "IPv6/DHCP Server/Bindings" tab; |
| winbox | show "Switch" menu on RB4011iGS+5HacQ2HnD; |
| wireless | improvements in wireless frequency selection; |
| wireless | improved system stability for all ARM devices with wireless; |
| Component | Change |
|---|---|
| bridge | properly disable dynamic CAP interfaces; |
| certificate | fixed "expires-after" parameter calculation; |
| certificate | fixed time zone adjustment for SCEP requests; |
| certificate | properly flush old CRLs when changing store location; |
| chr | fixed possible memory allocation failure when using multiple CPUs or interfaces on Xen installations; |
| crs328 | fixed SFP ports not reporting auto-negotiation status; |
| crs328 | improved link status update on disabled SFP and SFP+ interfaces; |
| defconf | automatically accept default configuration if reset done by holding button; |
| defconf | fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN; |
| discovery | fixed malformed neighbor information for routers that has incomplete IPv6 configuration; |
| discovery | fixed neighbor discovery for PPP interfaces; |
| discovery | properly use System ID for "software-id" value on CHR; |
| export | fixed "silent-boot" compact export; |
| health | fixed bad voltage readings on RB493G; |
| interface | improved system stability when including/excluding a list to itself; |
| ipsec | fixed hw-aead (H) flag presence under Installed SAs on startup; |
| ipsec | improved stability when uninstalling multiple SAs at once; |
| ipsec | properly handle peer profiles on downgrade; |
| ipsec | properly update warnings under peer menu; |
| kidcontrol | do not allow users with "read" policy to pause and resume kids; |
| log | properly handle long echo messages; |
| lte | added support for more ZTE MF90 modems; |
| ospf | improved stability while handling type-5 LSAs; |
| routerboard | renamed SIM slots to "a" and "b" on SXT LTE kit; |
| routerboard | show "boot-os" and "force-backup-booter" options only on devices that have such feature; |
| snmp | do not initialise interface traps on bootup if they are not enabled; |
| timezone | updated timezone information from tzdata2018g release; |
| traffic-flow | fixed post NAT port reporting; |
| traffic-flow | fixed "src-mac-address" and added "post-src-mac-address" fields; |
| tunnel | made "ipsec-secret" parameter sensitive; |
| usb | fixed power-reset for hAP ac^2 devices; |
| user | speed up first time login process after upgrade from version older than v6.43; |
| winbox | allow to specify SIM slot on LtAP mini; |
| winbox | enabled "fast-forward" by default when adding new bridge; |
| winbox | fixed neighbor discovery for IPv6 neighbors; |
| winbox | show "System/Health" only on boards that have health monitoring; |
| Component | Change |
|---|---|
| capsman | fixed "group-key-update" parameter not using correct units; |
| certificate | fixed certificate signing by SCEP client if multiple CA certificates are provided; |
| crs317 | fixed TX not working on sfp-sfpplus9 interface (introduced in v6.40beta12); |
| dhcpv6-client | use default route distance also for unreachable route added by DHCPv6 client; |
| discovery | fixed malformed neighbor information for routers that has incomplete IPv6 configuration; |
| discovery | fixed neighbor discovery for PPP interfaces; |
| ipsec | fixed active connection killing when changing peer configuration; |
| ipsec | made peers autosort themselves based on reachability status; |
| ipsec | moved "profile" menu outside "peer" menu (CLI only); |