Search changelog entries
| Component | Change |
|---|---|
| ipsec | accept only valid path for "export-pub-key" parameter in "key" menu; |
| quickset | fixed "country" parameter not properly setting regulatory domain configuration; |
| smb | fixed possible buffer overflow; |
| w60g | fixed disconnection issues in PtMP setups; |
| wireless | improved antenna gain setting for devices with built in antennas; |
| wireless | show indoor/outdoor frequency limitations under "/interface wireless info country-info" command; |
| Component | Change |
|---|---|
| bridge | fixed log message when hardware offloading is being enabled; |
| bridge | fixed packet forwarding with enabled DHCP Snooping and Option 82; |
| bridge | fixed system's identity change when DHCP Snooping is enabled (introduced in v6.44beta61); |
| bridge | improved packet handling when hardware offloading is being disabled; |
| certificate | show digest algorithm used in signature; |
| chr | distribute NIC queue IRQ's evenly across all CPUs; |
| chr | fixed IRQ balancing when using more than 32 CPUs; |
| crs3xx | fixed packet forwarding through SFP+ ports when using 100Mbps link speed; |
| crs3xx | fixed SFP+ linking using 1.25G SFP modules (introduced in v6.44beta39); |
| dhcpv6-server | fixed missing gateway for binding's network if RADIUS authentication was used; |
| dhcpv6-server | show "client-address" parameter for bindings; |
| ethernet | added "tx-rx-1024-max" counter to Ethernet stats; |
| ethernet | fixed packet forwarding when SFP interface is disabled on hEX S; |
| fetch | added option to specify multiple headers under "http-header-field", including content type; |
| fetch | improved stability when using HTTP mode; |
| fetch | removed "http-content-type" parameter; |
| gps | increase precision for dd format; |
| hotspot | added "https-redirect" under server profiles; |
| ike2 | retry RSA signature validation with deduced digest from certificate; |
| ipsec | require write policy for key generation; |
| kidcontrol | use "/128" prefix-length for IPv6 addresses; |
| lldp | fixed missing capabilities fields on some devices; |
| lte | added multiple APN support for R11e-4G; |
| lte | fixed passthrough DHCP address forward when other address is acquired from operator; |
| lte | improved SIM7600 initialization after reset; |
| lte | query "cfun" on initialization; |
| lte | require write policy for at-chat; |
| lte | update firmware version information after R11e-LTE/R11e-4G firmware upgrade; |
| ntp-client | fixed "dst-active" and "gmt-offset" being updated after synchronization with server; |
| ppp | fixed dynamic route creation towards VPN server when "add-default-route" is used; |
| quickset | fixed "country" parameter not properly setting regulatory domain configuration; |
| rb4011 | fixed SFP+ interface full duplex and speed parameter behavior; |
| rb4011 | improved SFP+ interface linking to 1Gbps; |
| sfp | fixed possible reboot loop when inserting SFP modules in CRS328-4C-20S-4S+ (introduced in v6.44beta61); |
| smb | fixed macOS clients not showing share contents; |
| smb | fixed possible buffer overflow; |
| smb | fixed Windows 10 clients not able to establish connection to share; |
| snmp | fixed "rsrq" reported precision; |
| snmp | report ifSpeed 0 for sub-layer interfaces; |
| switch | added comment field to switch ACL rules; |
| tr069-client | added "connection-request-port" parameter (CLI only); |
| usb | improved USB device powering on startup for hAP ac^2 devices; |
| usb | increased default power-reset timeout to 5 seconds; |
| userman | added first and last name fields for signup form; |
| w60g | fixed disconnection issues in PtMP setups; |
| winbox | renamed "Default AP Tx Rate" to "Default AP Tx Limit"; |
| winbox | renamed "Default Client Tx Rate" to "Default Client Tx Limit"; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| wireless | improved antenna gain setting for devices with built in antennas; |
| wireless | improved connection stability for new model Apple devices; |
| wireless | improved system stability when scanning for other networks; |
| wireless | show "installation" parameter when printing configuration; |
| Component | Change |
|---|---|
| ipsec | accept only valid path for "export-pub-key" parameter in "key" menu; |
| quickset | fixed "country" parameter not properly setting regulatory domain configuration; |
| smb | fixed possible buffer overflow; |
| w60g | fixed disconnection issues in PtMP setups; |
| wireless | improved antenna gain setting for devices with built in antennas; |
| wireless | show indoor/outdoor frequency limitations under "/interface wireless info country-info" command; |
| Component | Change |
|---|---|
| bridge | fixed BOOTP packet forwarding when DHCP Snooping is enabled; |
| certificate | added support for multiple "Subject Alt. Names"; |
| certificate | enabled RC2 cipher to allow P12 certificate decryption; |
| chr | improved system stability when insufficient resources are allocated to the guest; |
| console | updated copyright notice; |
| crs3xx | fixed slow bootup, upgrade and SFP status read (introduced in v6.44beta20); |
| gps | moved "coordinate-format" from "monitor" command to "set" parameter; |
| ike1 | fixed "rsa-key" authentication (introduced in v6.44beta); |
| ipsec | accept only valid path for "export-pub-key" parameter in "key" menu; |
| ipsec | added new "remote-id" peer matcher; |
| ipsec | fixed all policies not getting installed after startup (introduced in v6.43.8); |
| ipsec | moved "profile" menu outside "peer" menu; |
| lcd | made "pin" parameter sensitive; |
| led | fixed default LED configuration for RBSXTsq-60ad; |
| lte | fixed DHCP IP acquire in 3G mode for r11e-lte (introduced in v6.44beta54); |
| lte | fixed reported "rsrq" precision (introduced in v6.43.8); |
| profile | removed obsolete "file-name" parameter; |
| radius | implemented Proxy-State attribute handling in CoA and disconnect requests; |
| rb4011 | improved SFP+ interface linking to 1Gbps; |
| ssh | close active SSH connections before IPsec connections on shutdown; |
| ssh | fixed public key format compatibility with RFC4716; |
| supout | fixed "poe-out" output not showing all interfaces; |
| system | accept only valid path for "log-file" parameter in "port" menu; |
| system | removed obsolete "/driver" command; |
| tr069-client | added "check-certificate" parameter to allow communication without certificates; |
| tr069-client | added support for InformParameter object; |
| tr069-client | fixed certificate verification for certificates with IP address; |
| tr069-client | increased reported "rsrq" precision; |
| vrrp | made "password" parameter sensitive; |
| winbox | added "allow-dual-stack-queue" parameter in "IP/DHCP Server" and "IPv6/DHCP Server" menus; |
| winbox | added "conflict-detection" parameter in "IP/DHCP Server" menu; |
| winbox | added "coordinate-format" parameter in LTE interface settings; |
| winbox | allow specifying interface lists in "CAPsMAN/Access List" menu; |
| winbox | fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths; |
| winbox | fixed L2MTU parameter setting on "W60G" type interfaces; |
| winbox | fixed "LCD" menu not shown on RB2011UiAS-2HnD; |
| winbox | moved "Too Long" statistics counter to Ethernet "Rx Stats" tab; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| Component | Change |
|---|---|
| bridge | count routed FastPath packets between bridge ports under FastPath bridge statistics; |
| bridge | fixed BOOTP packet forwarding when DHCP Snooping is enabled; |
| crs317 | fixed packet forwarding when LACP is used with hw=no; |
| dhcpv6-server | allow to add DHCPv6 server with pool that does not exist; |
| ethernet | fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices; |
| ipsec | added new "remote-id" peer matcher (CLI only); |
| l2tp | fixed IPsec secret not being updated when "ipsec-secret" is changed under L2TP client configuration; |
| led | fixed PWR-LINE AP Ethernet LED polarity ("/system routerboard upgrade" required); |
| lte | added initial support for multiple APN for R11e-4G (new modem firmware required); |
| lte | fixed DHCP IP acquire (introduced in v6.43.7); |
| netinstall | do not show kernel failure critical messages in the log after fresh install; |
| routerboard | removed "RB" prefix from PWR-LINE AP devices; |
| sniffer | save packet capture in "802.11" type when sniffing on w60g interface in "sniff" mode; |
| snmp | fixed "rsrq" reported precision; |
| usb | improved power-reset error message when no bus specified on CCR1072-8G-1S+; |
| wireless | added new "installation" parameter to specify router's location; |
| wireless | show indoor/outdoor frequency limitations under "/interface wireless info country-info <country>" command; |