Search changelog entries
| Component | Change |
|---|---|
| capsman | fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required); |
| capsman | improved radar detection algorithm; |
| chr | improved stability when changing ARP modes on e1000 type adapters; |
| console | fixed "clear-history" restoring historic actions after power cycle; |
| console | removed "edit" and "set" actions from "System/History" menu; |
| console | updated copyright notice; |
| crs305 | disable optical SFP/SFP+ module Tx power after disabling SFP+ interface; |
| dhcpv4-server | improved stability when RADIUS interim update is sent; |
| dhcpv6-client | fixed timeout when doing rebind; |
| dhcpv6-client | properly update bind time when unused prefix received from the server; |
| dhcpv6-client | properly update IPv6 address on rebind; |
| dhcpv6-server | fixed logged error message when using "address-pool=static-only"; |
| dhcpv6-server | ignore prefix-hint from client's DHCPDISCOVER if static prefix received from RADIUS; |
| health | fixed health reporting on OmniTIK 5 PoE ac; |
| ipsec | improved system stability when processing decrypted packet on unregistered interface; |
| l2tp | improved system stability when disconnecting many clients at once; |
| led | fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD; |
| lte | show SIM error when no card is present; |
| ppp | fixed connection establishment when receiving "0.0.0.0" DNS; |
| ppp | fixed minor typo in "ppp-client" monitor; |
| ppp | prioritize "remote-ipv6-prefix-pool" from PPP secret over PPP profile; |
| qsfp | do not report bogus monitoring readouts on modules without DDMI support; |
| qsfp | improved module monitoring readouts for DAC and break-out cables; |
| routerboard | added "mode-button" support for RBcAP2nD; |
| security | fixed vulnerability for routers with default password (limited to Wireless Wire), admin could login on startup with empty password before default configuration script was fully loaded; |
| ssh | fixed output printing when "command" parameter used; |
| timezone | updated time zone database to version 2019c; |
| traffic-generator | improved memory handling on CHR; |
| w60g | fixed "monitor" command on disabled interfaces; |
| winbox | automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer"; |
| winbox | show "LCD" menu only on boards that have LCD screen; |
| wireless | added "ETSI" regulatory domain information; |
| wireless | added "indonesia4" regulatory domain information; |
| wireless | added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD; |
| wireless | allow using "canada2" regulatory domain on US lock devices; |
| wireless | fixed sensor MAC address reporting in TZSP header; |
| wireless | improved compatibility by adding default installation mode and antenna gain for devices with integrated antennas; |
| wireless | improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations; |
| wireless | improved IPQ4019, QCA9984, QCA9888 wireless interface stability; |
| Component | Change |
|---|---|
| chr | improved stability when changing ARP modes on e1000 type adapters; |
| console | prevent "flash" directory from being removed (introduced in v6.46); |
| console | updated copyright notice; |
| crs305 | disable optical SFP/SFP+ module Tx power after disabling SFP+ interface; |
| defconf | fixed "caps-mode" not initialized properly after resetting; |
| defconf | fixed default configuration loading on RBwAPG-60adkit (introduced in v6.46); |
| lora | fixed packet sending when using "antenna-gain" higher than 5dB; |
| lte | fixed "cell-monitor" on R11e-LTE in 3G mode; |
| lte | fixed "earfcn" reporting on R11e-LTE6 in UMTS and GSM modes; |
| lte | report only valid info parameters on R11e-LTE6; |
| ppp | fixed minor typo in "ppp-client" monitor; |
| qsfp | do not report bogus monitoring readouts on modules without DDMI support; |
| qsfp | improved module monitoring readouts for DAC and break-out cables; |
| routerboard | added "mode-button" support for RBcAP2nD; |
| security | fixed vulnerability for routers with default password (limited to Wireless Wire), admin could login on startup with empty password before default configuration script was fully loaded; |
| system | fixed "*.auto.rsc" file execution (introduced in v6.46); |
| system | fixed "check-installation" on PowerPC devices (introduced in v6.46); |
| traffic-generator | improved memory handling on CHR; |
| webfig | allow skin designing without "ftp" and "sensitive" policies; |
| webfig | fixed "skins" saving to "flash" directory if it exists (introduced in v6.46); |
| winbox | automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer"; |
| winbox | fixed "Default Route Distance" default value when creating new LTE APN; |
| winbox | removed duplicate "join-eui" and "dev-eui" parameters under "Lora/Traffic"; |
| Component | Change |
|---|---|
| bonding | improved slave interface MAC address handling; |
| bonding | prefer primary slave MAC address for bonding interface; |
| bridge | added logging message when a host MAC address is learned on a different bridge port; |
| chr | improved stability when changing ARP modes on e1000 type adapters; |
| console | prevent "flash" directory from being removed (introduced in v6.46); |
| console | updated copyright notice; |
| crs305 | disable optical SFP/SFP+ module Tx power after disabling SFP+ interface; |
| defconf | fixed "caps-mode" not initialized properly after resetting; |
| defconf | fixed default configuration loading on RBwAPG-60adkit (introduced in v6.46); |
| discovery | do not send CDP and LLDP packets on interfaces that does not have MAC address; |
| discovery | do not send discovery packets on inactive bonding slave interfaces; |
| discovery | do not send discovery packets on interfaces that are blocked by STP; |
| dot1x | added "radius-mac-format" parameter (CLI only); |
| health | added "gauges" submenu with SNMP OID reporting; |
| lora | added "ru-864-mid" channel plan; |
| lora | fixed packet sending when using "antenna-gain" higher than 5dB; |
| lora | improved immediate packet delivery; |
| lte | do not allow running "scan" on R11e-4G; |
| lte | fixed "band" value setting when configuration is reset on R11e-4G; |
| lte | fixed "cell-monitor" on R11e-LTE in 3G mode; |
| lte | fixed "earfcn" reporting on R11e-LTE6 in UMTS and GSM modes; |
| lte | improved all APN session activation after disconnect on R11e-LTE; |
| lte | report only valid info parameters on R11e-LTE6; |
| lte | use APN from network when blank APN used on R11e-4G; |
| ppp | fixed minor typo in "ppp-client" monitor; |
| qsfp | do not report bogus monitoring readouts on modules without DDMI support; |
| qsfp | improved module monitoring readouts for DAC and break-out cables; |
| routerboard | added "mode-button" support for RBcAP2nD; |
| sniffer | allow setting port for "streaming-server"; |
| snmp | added "dot1qTpFdbTable" OID reporting for Q-BRIDGE-MIB; |
| snmp | improved OID policy checking and error reporting on "set" command; |
| supout | added "dot1x" section to supout files; |
| system | correctly handle Generic Receive Offloading (GRO) for MPLS traffic; |
| system | fixed "*.auto.rsc" file execution (introduced in v6.46); |
| system | fixed "check-installation" on PowerPC devices (introduced in v6.46); |
| traceroute | improved stability when invalid packet is received; |
| traffic-generator | improved memory handling on CHR; |
| webfig | allow skin designing without "ftp" and "sensitive" policies; |
| webfig | fixed "skins" saving to "flash" directory if it exists (introduced in v6.46); |
| winbox | automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer"; |
| winbox | fixed "Default Route Distance" default value when creating new LTE APN; |
| winbox | removed duplicate "join-eui", "dev-eui", "counter", "chain", "size" and "payload" parameters under "Lora/Traffic"; |
| Component | Change |
|---|---|
| capsman | fixed CAP upgrading (introduced in v6.46); |
| console | fixed "clear-history" restoring historic actions after power cycle; |
| console | removed "edit" and "set" actions from "System/History" menu; |
| defconf | fixed default configuration loading after fresh install (introduced in v6.46); |
| dhcpv6-server | use lease time from RADIUS; |
| dude | fixed image and font file accessing (introduced in v6.46); |
| gps | only adjust system time after GPS signal is established; |
| health | fixed health reporting on OmniTIK 5 PoE ac; |
| ipsec | improved system stability when processing decrypted packet on unregistered interface; |
| l2tp | improved system stability when disconnecting many clients at once; |
| log | fixed "disk-file-name" parameter validation (introduced in v6.46); |
| lora | added support for MIPSBE, PPC, TILE and x86 architectures; |
| lora | improved confirmed downlink forwarding; |
| lte | do not reset modem when setting the same SIM slot on LtAP; |
| lte | show SIM error when no card is present; |
| ppp | fixed session establishment with high amount of tunnels (introduced in v6.46); |
| ppp | prioritize "remote-ipv6-prefix-pool" from PPP secret over PPP profile; |
| qsfp | do not show "sfp-wavelength" for cables that do not support it; |
| snmp | fixed health related OID polling (introduced in v6.46); |
| supout | fixed autosupout.rif file generation (introduced in v6.46); |
| system | fixed "*.auto.rsc" file execution (introduced in v6.46); |
| user-manager | fixed "db-path" parameter validation (introduced in v6.46); |
| webfig | fixed skin folder presence (introduced in v6.46); |
| winbox | fixed "allowed-number" parameter setting invalid value in "Tool/SMS" menu; |
| winbox | show "LCD" menu only on boards that have LCD screen; |
| wireless | added "russia4" regulatory domain information; |
| wireless | improved compatibility by adding default installation mode and gain for devices with integrated antennas; |
| wireless | improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations; |
| Component | Change |
|---|---|
| console | fixed "clear-history" restoring historic actions after power cycle; |
| console | removed "edit" and "set" actions from "System/History" menu; |
| crs3xx | fixed "ingress-rate" property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices; |
| defconf | fixed default configuration loading after fresh install (introduced in v6.46); |
| dhcpv6-client | improved error logging when when renewed address differs; |
| fetch | fixed "User-Agent" usage if provided by "http-header-field"; |
| health | fixed health reporting on OmniTIK 5 PoE ac; |
| health | improved health reporting on CCR1072-1G-8S+; |
| ipsec | improved system stability when processing decrypted packet on unregistred interface; |
| l2tp | improved system stability when disconnecting many clients at once; |
| lora | improved confirmed downlink forwarding; |
| lte | do not reset modem when setting the same SIM slot on LtAP; |
| lte | fixed multiple APN reactivation after deactivation by operator; |
| lte | show SIM error when no card is present; |
| netinstall | removed "Flashfig" from Netinstall; |
| netinstall | removed "Make Floppy" from Netinstall; |
| netinstall | signed netinstall.exe with Digital Signature; |
| ppp | prioritize "remote-ipv6-prefix-pool" from PPP secret over PPP profile; |
| snmp | added "dot1qTpFdbTable" OID reporting for Q-BRIDGE-MIB; |
| snmp | fixed "dot1dBasePort" index offset for BRIDGE-MIB; |
| snmp | fixed health related OID polling (introduced in v6.46); |
| snmp | improved stability when polling MAC address related OID; |
| supout | fixed autosupout.rif file generation (introduced in v6.46); |
| w60g | use "arp" and "mtu" parameters from master interface when creating a new station; |
| winbox | added "auto-erase" option to "Tool/SMS" menu; |
| winbox | fixed "allowed-number" parameter setting invalid value in "Tool/SMS" menu; |
| winbox | show "LCD" menu only on boards that have LCD screen; |
| wireless | improved compatibility by adding default installation mode and gain for devices with integrated antennas; |
| wireless | improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations; |