|
arm64
|
improved low disk space handling condition on upgrade; |
|
backup
|
added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only); |
|
backup
|
fixed automatic backup generation when resetting configuration; |
|
bgp
|
do not export default BGP values; |
|
bgp
|
improvements on detecting peers local address when IPv6 link-local addresses are used; |
|
bluetooth
|
allow to export device, advertiser and scanner configuration; |
|
capsman
|
improved system stability when processing CAP packet by Mangle; |
|
certificate
|
allow to choose digest algorithm for CSR signing; |
|
certificate
|
made "fingerprint" parameter read-only; |
|
chr
|
improved system stability when writing into memory; |
|
chr
|
temporarily suspended downgrade to RouterOS v6; |
|
console
|
fixed "print" command with additional "where" condition; |
|
console
|
made "password" parameter mandatory when creating a new user; |
|
console
|
properly erase CLI history after configuration reset; |
|
crs3xx
|
fixed CPU load balancing for ARM dual core devices; |
|
dhcp-server
|
fixed DHCP Option decimal value parsing; |
|
dhcp-server
|
fixed statistics sending in "Accounting Stop" packets; |
|
dhcp-server
|
send "Class" attribute in "Accounting Request" when provided by RADIUS; |
|
dhcpv4-server
|
allow adding comments; |
|
dhcpv4-server
|
reset dynamic "bcast" flag when receiving offer from DHCP relay; |
|
dhcpv4-server
|
reset offer counter when receiving offer from DHCP relay; |
|
ethernet
|
improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG); |
|
graphing
|
properly generate interface graph for traffic higher than 2.1Gbps; |
|
hotspot
|
fixed login page over HTTPS; |
|
ipsec
|
added hardware acceleration support for CCR2116; |
|
l3hw
|
fixed HW offloaded routing when using 7 or more VLAN interfaces; |
|
l3hw
|
fixed ICMP message when routed packet exceeds MTU and DF flag is set; |
|
l3hw
|
fixed bonding source MAC address; |
|
l3hw
|
improved system stability when using 7 or more VLAN interfaces; |
|
lora
|
fixed "antenna-gain" parameter unit; |
|
lte
|
added basic information support for Telit LM960 and LM940 in MBIM mode; |
|
lte
|
expose diagnostics channel for all modems; |
|
lte
|
fixed "monitor" command to not report old info; |
|
lte
|
fixed packet forwarding on R11e-4G and R11e-LTE-US; |
|
ntp
|
print log change time with time-zone applied; |
|
ospf
|
fixed distance if "originate-default" is set to "always"; |
|
ospf
|
fixed neighbor stuck in ExStart; |
|
ospf
|
fixed simple authentication; |
|
ospf
|
improved logging; |
|
ospf
|
improved overall stability; |
|
ospf
|
improved stability for very large LSDB; |
|
ospf
|
improved stability when DR goes down; |
|
ospf
|
improves stability when handling looped back OSPF packets; |
|
ovpn
|
added SHA2 authentication algorithm support; |
|
ovpn
|
added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets; |
|
ovpn
|
added option to send disconnect message in UDP mode; |
|
ovpn
|
fixed large option message parsing; |
|
poe
|
update PoE firmware only on devices that support it; |
|
ppp
|
show local and remote IPv6 addresses (CLI only); |
|
pppoe
|
added option to configure "host-uniq" parameter; |
|
pppoe
|
added option to ignore PADI messages with empty service name; |
|
pppoe
|
use default MTU of 1492; |
|
pptp
|
added insecure connection warning; |
|
queue
|
improved system stability when processing traffic; |
|
route
|
fixed "min-prefix" configuration when set to 0; |
|
route-filters
|
allow to filter and modify default route if "originate-default" is set to "always"; |
|
route-filters
|
fixed possible address list race condition and memory leak; |
|
socks
|
fixed SOCKS5 support; |
|
ssh
|
fixed forwarding with IPv6 link-local addresses; |
|
ssl
|
fixed CA certificate processing when "subjAltName" is marked as critical; |
|
supout
|
added "port-controller" bridge section; |
|
tr069-client
|
accept 200-299 codes for HTTP diagnostics; |
|
tr069-client
|
added support for wireless client uptime reporting; |
|
upgrade
|
improved 404 error handling when checking for new versions; |
|
upgrade
|
improved downgrade prompt message; |
|
user
|
removed obsolete "tikapp" policy; |
|
user
|
send "Class" attribute in "Accounting Request" when provided by RADIUS; |
|
webfig
|
fixed default configuration popup presence; |
|
webfig
|
fixed user policy lookup for skin designer; |
|
wifiwave2
|
added support for handling disconnect request messages from RADIUS servers; |
|
wifiwave2
|
fixed calling "scan" and "frequency-scan" commands through the API; |
|
winbox
|
added "Mode" parameter under "Wireless" menu with WifiWave2 package; |
|
winbox
|
added "TLS Version" parameter for "Interface/OVPN"; |
|
winbox
|
added "VRF" parameter for "SSH" and "Telnet" menus; |
|
winbox
|
added interface list support for "IP/Traffic Flow" menu; |
|
winbox
|
added local/remote CPU load parameters for "Bandwidth Test"; |
|
winbox
|
added support for "Tool/Speedtest" menu; |
|
winbox
|
added support for W60G align tool; |
|
winbox
|
changed "Accept Redirects" parameter type under "IPv6/Settings" menu; |
|
winbox
|
do not require "name" and "file name" parameters for certificate import/export; |
|
winbox
|
do not show connection tracking table if it has more than 10000 entries; |
|
winbox
|
fixed "Switch" menu on Chateau devices; |
|
winbox
|
fixed "expires-after" certificate parameter value; |
|
winbox
|
fixed address list type parameters in "Routing" menu; |
|
winbox
|
fixed error message when adding NTH rule with "0" value; |
|
winbox
|
fixed minor typo under "LTE" interface menu; |
|
winbox
|
made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu; |
|
winbox
|
made "Routing Filters/Rules" table sortable; |
|
winbox
|
moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops"; |
|
winbox
|
properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu; |
|
winbox
|
properly update ethernet auto negotiation status on CHR; |
|
winbox
|
renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu; |
|
winbox
|
renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu; |
|
winbox
|
report local terminal session as "local" instead of "telnet"; |
|
winbox
|
require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu; |
|
winbox
|
require non empty "Packet Mark" value under "Queues" menu; |
|
winbox
|
show "Lost Ratio" column by default under "Tools/Traffic Generator" menu; |
|
winbox
|
show "Routes" column by default under "PPP/Secrets" menu; |
|
winbox
|
show additional columns by default for "Wireless" menu with WifiWave2 package; |
|
winbox
|
updated default "Routing/BGP/Peer Cache" table appearance; |
|
winbox
|
use "total" as default value for "Tools/Profile"; |
|
wireguard
|
fixed IPv6 LL address generation; |
|
wireguard
|
made "preshared-key" and "private-key" values sensitive; |
|
wireless
|
added information about client signal strength to log messages about disconnections; |
|
wireless
|
fixed frequency range information for IPQ4019 interfaces; |
|
zerotier
|
properly handle IP address change; |