Search changelog entries
| Component | Change |
|---|---|
| bgp | added initial support for prefix limit; |
| bgp | improved stability when editing BGP template; |
| bonding | fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices; |
| ccr | added visible "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe; |
| ccr | usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe; |
| cd-install | allow selecting on which drive to install RouterOS; |
| conntrack | limited full Connection Tracking warning to 1 message per minute; |
| crs3xx | fixed storm rate on 1Gbps interfaces for CRS354 devices; |
| defconf | suggest user to set up new password; |
| dhcpv4-server | fixed minor logging typo; |
| fetch | improved full disk detection; |
| filesystem | fixed possible boot failure on RB850Gx2 and RB1100AHx2; |
| filesystem | improved long-term filesystem stability and data integrity; |
| gps | fixed minor value unit typo; |
| ipv6 | removed bogus commands from IPv6 neighbors menu; |
| l3hw | improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310; |
| l3hw | improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices; |
| leds | fixed ethernet LED behavior on wAP R ac; |
| leds | fixed wireless related LED behavior with WW2 package; |
| lte | added SMS sending support for MBIM protocol; |
| lte | added support for generic PXA1802 based modems; |
| lte | disabled wait for LTE auto attach; |
| lte | hide slave interfaces from export; |
| lte | improved stability when upgrading LTE firmware on Chateau 5G; |
| mlag | fixed MAC address moving between bridge ports; |
| mpls | do MPLS forwarding for nexthops without mappings; |
| mpls | fixed MPLS MTU and path MTU selection; |
| mpls | fixed MPLS forwarding after any interface configuration parameter is changed; |
| ospf | fixed GRE interface compatibility with OSPF; |
| ospf | improved stability when enabling or removing interface-template entries; |
| ovpn | fixed memory leak on TILE architecture; |
| ovpn | fixed packet processing on MT7621A; |
| ovpn | improved Windows client disconnect procedure in UDP mode; |
| ovpn | improved service stability when processing frequent disconnects in UDP mode; |
| ovpn | improved stability when forwarding traffic on TILE; |
| ping | fixed socket allocation after VRF change; |
| ppp | fixed "remote-ipv6-prefix" parameter unsetting; |
| ppp | fixed active sessions sometimes getting stuck; |
| ppp | fixed issue with multiple active sessions when "only-one" is enabled; |
| queues | improved stability in large list of queue scenarios; |
| rb5009 | fixed 10G linking issues with Intel X520, XXV710 NICs; |
| route | fixed "table" menu emptying after RouterOS upgrade; |
| route | fixed static routes in VRF becoming invalid after reboot; |
| route-filter | fixed community matchers; |
| rsvp-te | improved stability when "Resv" received for non-existing session; |
| supout | added RIP section; |
| system | fixed IP service initialization in VRF after system startup; |
| system | fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall; |
| torch | properly capture all related IPv6 traffic; |
| upnp | improved stability when processing incomplete HTTP header; |
| vpls | fixed "pw-l2mtu" parameter usage; |
| vrf | fixed VRF leaking; |
| winbox | do not show "unknown" area under "Routing/OSPF/LSA" menu; |
| winbox | do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu; |
| winbox | made "Interface Templates" table sortable under "Routing/OSPF" menu; |
| winbox | properly clean up SFP module information after it is unplugged; |
| winbox | properly clean up disk after a failed file upload; |
| winbox | show PVID column by default under "Bridge" menu; |
| wireless | fixed EAP-TLS authentication; |
| wireless | fixed GUD version in 3gpp information; |
| ww2 | fixed VLAN tag handling; |
| x86 | improved support for i40e driver; |
| x86 | improved support for Intel E810 NIC; |
| Component | Change |
|---|---|
| bonding | fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices; |
| bridge | fixed packet marking for IP/IPv6 firewall; |
| dot1x | improved server stability when using re-authentication; |
| fetch | improved full disk detection; |
| gps | fixed minor value unit typo; |
| l3hw | improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310; |
| led | fixed QSFP+, QSFP28 activity LEDs when using 40Gbps modules (introduced in v7.3beta33); |
| lte | disabled wait for LTE auto attach; |
| mpls | fixed MPLS MTU and path MTU selection; |
| ovpn | fixed hardware offloading support on CHR; |
| ovpn | improved Windows client disconnect procedure in UDP mode; |
| ovpn | moved authentication failure messages to "info" logging level; |
| ppp | added warning when using prefix length other than /64 for router advertisement; |
| ppp | fixed "remote-ipv6-prefix" parameter unsetting; |
| ppp | fixed issue with multiple active sessions when "only-one" is enabled; |
| routerboot | properly reset system configuration when protected bootloader is enabled and reset button used; |
| rsvp-te | improved stability when "Resv" received for non-existing session; |
| sfp | improved QSFP/SFP interface initialization for 98DXxxxx switches; |
| switch | fixed missing stats from traffic-monitor for 98DXxxxx and 98PX1012 switches; |
| system | fixed RouterOS bootup when wifiwave2 package is installed (introduced in v7.3beta34); |
| system | fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall; |
| user-manager | improved stability when received EAP attribute with non-existing state attribute; |
| vpls | fixed "pw-l2mtu" parameter usage; |
| Component | Change |
|---|---|
| bgp | improved stability when editing BGP template; |
| ccr | added "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe; |
| dhcpv4-server | added "age" parameter for dynamic leases; |
| dhcpv4-server | fixed minor logging typo; |
| export | fixed value ID exporting that does not refer to any name; |
| fetch | fixed SFTP upload; |
| filesystem | fixed possible boot failure on RB850Gx2 and RB1100AHx2; |
| filesystem | improved long-term filesystem stability and data integrity; |
| ipsec | fixed IPsec IRQ initialization on startup on TILE; |
| leds | fixed ethernet LED behavior on wAP R ac; |
| lte | disabled extended signal info query for Telit LN940 module; |
| ospf | fixed GRE interface compatibility with OSPF; |
| ospf | improved stability when enabling or removing interface-template entries; |
| ovpn | improved stability when forwarding traffic on TILE; |
| ping | fixed socket allocation after VRF change; |
| ppp | fixed active sessions sometimes getting stuck; |
| queues | improved stability in large list of queue scenarios; |
| rb5009 | fixed 10G linking issues with Intel X520, XXV710 NICs; |
| ssh | fail non-interactive client after first invalid password; |
| supout | added IGMP-Proxy section; |
| winbox | added "Comment" parameter for BGP templates and connections; |
| winbox | made "Interface Templates" table sortable under "Routing/OSPF" menu; |
| winbox | made "MPLS Interface" table sortable under "MPLS" menu; |
| winbox | made 56 the default ping size; |
| winbox | moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IPv6/Firewall" menu; |
| winbox | show correct file system type under "System/Disks" menu; |
| Component | Change |
|---|---|
| filesystem | improved long-term filesystem stability and data integrity; |
| Component | Change |
|---|---|
| bgp | added initial support for prefix limit; |
| bonding | added "lacp-user-key" setting; |
| ccr | added visible "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe; |
| ccr | usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe; |
| cd-install | allow selecting on which drive to install RouterOS; |
| conntrack | limited full Connection Tracking warning to 1 message per minute; |
| dhcpv4-server | added "age" parameter for dynamic leases; |
| dhcpv4-server | fixed conflicting or declined lease detection when IP pool differs from server's configuration; |
| filesystem | improved UBIFS stability and data integrity after downgrade to RouterOS v6 and upgrade to RouterOS v7; |
| gps | added GPS package support for Chateau devices; |
| ipv6 | added "ra-preference" parameter support for RA; |
| ipv6 | removed bogus commands from IPv6 neighbors menu; |
| l3hw | improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices; |
| leds | fixed wireless related LED behavior with WW2 package; |
| lora | do not allow setting non-existing forwarding server; |
| lora | fixed bogus TOO_EARLY errors; |
| lora | removed TX lookup table; |
| lte | added MCS, CQI and RI value reporting for Fibocom FG621; |
| lte | added SMS sending support for MBIM protocol; |
| lte | added support for generic PXA1802 based modems; |
| lte | disabled wait for LTE auto attach; |
| lte | expose diagnostics channel for all modems; |
| lte | fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6; |
| lte | fixed Sierra MC7455 modem initialization; |
| lte | hide slave interfaces from export; |
| lte | improved stability when configuring multiple APN's at the same time in MBIM mode; |
| lte | improved stability when upgrading LTE firmware on Chateau 5G; |
| mlag | fixed MAC address moving between bridge ports; |
| mpls | do MPLS forwarding for nexthops without mappings; |
| mpls | fixed MPLS forwarding after any interface configuration parameter is changed; |
| ntp | fixed "use-local-clock" behavior when enabling server; |
| ovpn | fixed memory leak on TILE architecture; |
| ovpn | fixed packet processing on MT7621A; |
| ovpn | improved service stability when outbound packets are blocked by firewall in UDP mode; |
| ovpn | improved service stability when processing frequent disconnects in UDP mode; |
| port | do not loose "parity" setting; |
| route | fixed "nexthop" table printing; |
| route | fixed "table" menu emptying after RouterOS upgrade; |
| route | fixed static routes in VRF becoming invalid after reboot; |
| route-filter | fixed community matchers; |
| routerboard | fixed USB bus numbering on LtAP and M33G; |
| routerboot | added extra shortcut information on how to boot into etherboot; |
| sfp | added 2.5Gbps rate for SFP+ and QSFP+ interfaces on 98DXxxxx and 98PX1012 switches (requires disabled auto-negotiation); |
| sfp | improved Q/SFP interface initialization and stability for 98DXxxxx and 98PX1012 switches; |
| snmp | hide Vendor ID in DHCP MIB when branding is present; |
| supout | added IGMP-Proxy section; |
| supout | added NTP servers section; |
| supout | added PIMSM section; |
| supout | added RIP section; |
| supout | added WireGuard section; |
| switch | added option to match source and destination IP addresses in ARP packets for RB5009 (requires mac-protocol=arp setting); |
| system | fixed IP service initialization in VRF after system startup; |
| torch | properly capture all related IPv6 traffic; |
| tr069-client | fixed RPC download of "1 Vendor Configuration File" with branding package; |
| upnp | improved stability when processing incomplete HTTP header; |
| user-manager | added "Acct-Interim-Interval" to predefined attribute list; |
| w60g | improved stability on Cube 60Pro ac and CubeSA 60Pro ac; |
| webfig | properly show all routing table content; |
| winbox | added "ra-preference" parameter under "IPv6/ND" menu; |
| winbox | added SKID and AKID parameters under "Certificate" menu; |
| winbox | added warning message for LTE upgrade process; |
| winbox | do not auto start Wireless Sniffer when opened; |
| winbox | do not show "unknown" area under "Routing/OSPF/LSA" menu; |
| winbox | do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu; |
| winbox | fixed graph drawing in QuickSet; |
| winbox | fixed hex type values under "User Manager" menu; |
| winbox | fixed typo in ZeroTier instance title; |
| winbox | minimal required version is v3.33; |
| winbox | moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IP/Firewall" menu; |
| winbox | properly clean up SFP module information after it is unplugged; |
| winbox | properly clean up disk after a failed file upload; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| winbox | show PVID column by default under "Bridge" menu; |
| winbox | take into account timezone for timed values under "User Manager" menu; |
| wireless | fixed "wmm-support=required" checking; |
| wireless | fixed EAP-TLS authentication; |
| wireless | fixed GUD version in 3gpp information; |
| ww2 | fixed VLAN tag handling; |
| x86 | improved support for Intel E810 NIC; |
| zerotier | added support for Controller configuration; |