Search changelog entries
| Component | Change |
|---|---|
| bth | added "Back To Home" VPN service for ARM, ARM64, and TILE devices; |
| console | display "End-User License Agreement" prompt after configuration reset; |
| ethernet | fixed default "advertise" property for CRS310-8G+2S+ device (introduced in v7.12beta3); |
| sfp | fixed 1Gbps advertise for L009 devices (introduced in v7.12beta3); |
| sfp | fixed 1Gbps advertise using SFP+ or SFP28 modules in SFP interface (introduced in v7.12beta3); |
| sfp | improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips; |
| Component | Change |
|---|---|
| lte | fixed FG621-EA possible timeouts during firmware upgrade; |
| netinstall-cli | fixed "-k" key option (introduced in v7.12beta7); |
| poe-out | removed "auto" mode support for L009 devices; |
| routerboard | fixed "reset-button" support for wAP ac and wAP R ac devices; |
| sfp | fixed incorrect link speed when changing link modes (introduced in v7.12beta3); |
| system | fixed process multithreading (introduced in v7.9); |
| system | improved system stability during booting for L009 devices; |
| Component | Change |
|---|---|
| bridge | fixed bridge host ageing timeout behaviour (introduced in 7.12beta8); |
| led | fixed CRS312 Ethernet port LED functionality (introduced in 7.12rc1); |
| led | fixed 5G modem mobile network category LED colours; |
| ospf | fixed OSPFv3 authentication header length calculation; |
| pimsm | fixed BSR update process; |
| pimsm | fixed UIB update process; |
| qsfp | fixed incorrect QSFP temperature readings in negative temperature; |
| route | fixed VRF functionality on devices where "single-process" routing process mode is enabled (introduced in 7.12rc1); |
| sfp | fixed link establishment after forced speed changes for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1); |
| sfp | fixed link establishment with passive copper cables for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1); |
| Component | Change |
|---|---|
| bfd | fixed sessions when setting VRF; |
| bfd | improved system stability; |
| console | improved system stability; |
| rename "address" property to "server"; | |
| flash | show more accurate "total-hdd-space" resource property; |
| gps | expose GPS port for Quectel EM12-G (vendor-id="0x2c7c", device-id="0x0512"); |
| ike1 | fixed invalid key length on phase1 negotiation; |
| interface | added "macvlan" interface support; |
| l3hw | prioritize local IP addresses over the respective /32 and /128 routes; |
| leds | fixed "wireless-status" and "wireless-signal-strength" for wireless interfaces (introduced in v7.12beta7); |
| netinstall-cli | updated configuration option description; |
| pimsm | improved system stability; |
| poe-out | improved "auto" mode for devices with single PoE-out port; |
| qsfp | improved auto link detection for AOC cables; |
| route | added "single-process" configuration setting, enabled by default on devices with 64MB or less RAM memory; |
| route | added "suppress-hw-offload" setting for IPv6 routes; |
| sfp | added 5Gbps rate for SFP+ interface on 98DX224S, 98DX226S, and 98DX3236 switch chips; |
| sfp | fixed failed auto-negotiation for RB5009 devices (introduced in v7.12beta3); |
| sfp | improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips; |
| tftp | fixed empty file name matching; |
| webfig | fixed interface addition (introduced in v7.12beta7); |
| wifiwave2 | added an alternative QoS priority assignment mechanism based on IP DSCP; |
| wifiwave2 | added station-bridge interface mode; |
| wifiwave2 | implemented an option to transmit IP multicast packets as unicasts; |
| wifiwave2 | use CAPsMAN's "datapath.vlan-id" on CAP for bridge port "pvid"; |
| winbox | added "Addresses" property under "Routing/BFD/Configuration" menu; |
| winbox | added "BUS" property for USB Power Reset button for LtAP-2HnD and CCR1072; |
| winbox | added "USB" button under "System/RouterBOARD" menu for LtAP-2HnD; |
| winbox | added Enable/Disable button under "Routing/RIP/Static Neighbors" menu; |
| winbox | added missing properties under "WifiWave2" menu; |
| winbox | do not show "F" flag for disabled entries under "IP/Routes" menu; |
| winbox | fixed "Do" property under "Routing/Filters/Select Rule" menu; |
| winbox | fixed "Range" property under "Routing/Filters/Num Set" menu; |
| winbox | fixed "Switch" menu for CCR2004-16G-2S+; |
| winbox | improved support for certain properties under "WifiWave2/Interworking Profiles" menu; |
| winbox | show "unknown" value for "FS" property under "System/Disks" menu if the data is not available; |
| wireguard | added "auto" and "none" parameter for "private-key" and "presharde-key" parameters; |
| wireguard | allow to specify client settings under peer menu which will be included in configuration file and QR code; |
| Component | Change |
|---|---|
| bfd | improved system stability; |
| bgp | fixed "input.filter-chain" argument selection in VPN configuration; |
| bgp | improved logging; |
| bluetooth | added basic support for connecting to BLE peripheral devices; |
| console | export required properties with default values; |
| console | improved system stability; |
| console | restrict permissions to "read,write,reboot,ftp,romon,test" for scripts executed by DHCP, Hotspot, PPP and Traffic-Monitor services; |
| l3hw | fixed IPv6 route suppression; |
| led | fixed "interface-status" configuration for virtual interfaces; |
| lora | added LNS protocol support; |
| lte | changed R11e-LTE ARP behavior to NoArp; |
| lte | fixed sub-interface auto-removal in multiple APN setups; |
| lte | show correct data class when connected to 5G SA network; |
| mqtt | added on-message feature for subscribed topics; |
| mqtt | added parallel-scripts-limit parameter to set maximum allowed number of scripts executed at the same time; |
| mqtt | added wildcard topic subscription support; |
| netinstall | added option to discard branding package; |
| netinstall | display package filename in GUI Descption column if package description is not specified; |
| netinstall-cli | added option to discard branding package; |
| netinstall-cli | allow ".rsc" script filenames; |
| poe-out | driver optimization for AF/AT controlled boards; |
| poe-out | fixed rare CRS328 poe-out menu and poe-out port config loss after reboot; |
| route | added "single-process" configuration setting, enabled by default on devices with 64MB or less RAM memory (CLI only); |
| route | added "suppress-hw-offload" setting for IPv6 routes; |
| route | reverse community "delete" and "filter" command behavior; |
| routerboard | added "reset-button" support for RB800, RB1100 and RB1100AHx2 devices; |
| sfp | fixed 25Gbps link with FEC91 (introduced in v7.12beta7); |
| snmp | changed "mtxrGaugeValue" type to integer; |
| switch | fixed packet forwarding between Ethernet ports for CRS354 switches (introduced in v7.12beta7); |
| webfig | fixed timezone for interface "Last Link Down/Up Time"; |
| wifiwave2 | correctly add interface to specified "datapath.interface-list"; |
| wifiwave2 | fixed re-connection failures for 802.11ax interfaces in station mode; |
| wifiwave2 | limit L2MTU to 1560 until a fix is available for a bug causing interfaces to fail transmitting larger frames than that; |
| wifiwave2 | log more information regarding authentication failures; |
| winbox | added "Host Key Type" setting under "IP/SSH" menu; |
| winbox | added "Key Owner" setting under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus; |
| winbox | added "Remote Min Tx" parameter under "Routing/BFD/Session" menu; |
| winbox | added "Startup Delay" setting under "Tools/Netwatch" menu; |
| winbox | added "Use BFD" setting under "Routing/RIP/Interface-Template" menu; |
| winbox | added MQTT subscription menu; |
| winbox | allow to specify server as DNS name under "Tools/Email" menu; |
| winbox | rename "DSCP" setting to "DSCP (+ECN)" under "Tools/Traffic-Generator/Packet-Templates" menu; |
| winbox | rename "Name" setting to "List" under "IP,IPv6/Firewall/Address-List" menu; |
| winbox | rename "Password" button to "Change Now" under "System/Password" menu; |
| wireguard | added "auto" parameter for "private-key" and "presharde-key" parameters; |
| wireguard | request public or private key to be specified in order to create peer; |
| x86 | igb updated driver to 5.14.16 version; |
| x86 | igbvf updated driver from in-tree Linux kernel; |
| x86 | updated latest available pci.ids; |