|
bridge
|
add a per-VLAN DHCP snooping option; |
|
bridge
|
fix loop-protect not working when a VLAN interface is added to the bridge; |
|
bridge
|
show if bridge port is blocked by dot1x; |
|
bridge
|
store hw option for disabled bridge ports; |
|
cmr
|
add initial implementation of centralised platform for RouterOS devices, allowing updates, monitoring, alerts and other options; |
|
console
|
improve stability; |
|
container
|
add /app menu to ARM32 devices; |
|
crypto
|
improve ECDSA and EdDSA key and signature validation; |
|
dhcpv4-client
|
improve stability when the interface is deactivated while the client broadcasts a DHCP release; |
|
dhcpv6-server
|
add a dns-none option to not include DNS options in responses; |
|
dhcpv6-server
|
fix a DHCPv6 server failure when the RADIUS reply contains an empty delegated IPv6 prefix; |
|
dns
|
improve service stability on HTTP/2 DoH connections; |
|
ethernet
|
improve stability on devices with Intel I226-V network controllers; |
|
ethernet
|
move the port bandwidth setting to the switch port menu; |
|
files
|
improve stability when moving directories to external storage; |
|
interface
|
show if interface is blocked by stp or dot1x; |
|
ipsec
|
fix IPsec tunnels failing after migration from the old QKD settings; |
|
ipsec
|
fix IPsec tunnels not establishing when an address my-id is configured on the responder; |
|
l3hw
|
add VRRP hardware offloading support; |
|
log
|
add the container name to CEF logs; |
|
lte
|
do not reconfigure if not RouterOS activated CID is deactivated for R11l-LTE7 modem; |
|
lte
|
fix dialer for D-Link DWM-222W modems; |
|
lte
|
fix IPv6 route not being added on modems that do not report a gateway via control interface; |
|
lte
|
fix modem firmware-upgrade failing when SMS polling is enabled; |
|
lte
|
fix multi-APN passthrough stopping when one APN fails to connect; |
|
lte
|
fix multi-APN passthrough stopping when one passthrough-interface VLAN is down on the CPE in multi passthrough interface setup; |
|
lte
|
fix passthrough cleanup when the lte link goes down for QMI modems; |
|
lte
|
fix recurring LTE disconnects R11e-LTE-US modem and some Sierra modems; |
|
lte
|
keep the "auto" MTU option on LTE interface after reboot; |
|
lte
|
reworked multi-apn support. Added support for slave APN interface add/remove; |
|
netinstall
|
install the package version of the configured update channel; |
|
ovpn
|
improve stability in UDP Ethernet mode when the TX queue is full; |
|
pim
|
fix a routing process failure when the hello-delay is set to 0; |
|
ptp
|
fix PTP not working on a VLAN-aware bridge when IGMP snooping is enabled; |
|
qos
|
fix per-queue counters after a switch restart (introduced in v7.23); |
|
quickset
|
fix the WAN interface being selected incorrectly; |
|
reverse-proxy
|
fix setting the VRF parameter for reverse-proxy rules via CLI; |
|
switch
|
add interface-list support to port isolation; |
|
switch
|
fix high CPU usage when removing switch VLANs on Atheros-based switch chips; |
|
switch
|
fix switch rules not working on Atheros-based switch chips; |
|
switch
|
fix switch rules port matchers not working on IPv6 traffic on Atheros-based switch chips; |
|
switch
|
fix switch rules with rate limits stopping traffic on CRS3xx devices; |
|
switch
|
improve stability on CRS326-24S+2Q+ devices; |
|
system
|
improve stability; |
|
system
|
stop the flash configuration store from growing on dynamic configuration changes; |
|
webfig
|
add conditional coloring of cells in tables; |
|
wifi
|
add a default-country parameter in radio settings (CLI only); |
|
wifi
|
fix WPA3 SAE authentication issue for ECC group 21 (introduced in 7.24.3); |
|
wifi
|
implement channel.reselect-interval feature for missing drivers; |
|
wifi
|
reuse freed station association IDs; |
|
wifi-mediatek
|
update the wireless driver and firmware; |
|
wifi-qcom
|
fix antenna gain setting not affecting transmit power (introduced in v7.24); |
|
winbox
|
add the interface column to the OSPF neighbor list; |
|
winbox
|
rename "minimum-version" to "minimum-firmware" under "System/RouterBOARD" menu; |
|
winbox
|
show warning messages under "System/Users/SSH Keys" and "System/Users/SSH Private Keys" menu; |
|
wireguard
|
do not show an interface as running when it has no peers; |
|
wireguard
|
fix a client-dns value that could not be removed in WinBox; |
|
wireguard
|
fix a peer that would not work after import when no endpoint address is set; |