Component: wireless
374 changelog entries across 121 version(s)
Releases by channel (stacked)
- enable all chains by default on devices without external antennas after configuration reset;
- fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
- fixed usage of allowed signal strength values received from RADIUS;
- improved wireless throughput on hAP ac^2 and cAP ac;
- improved compatibility with BCM chipset devices;
- improved compatibility with BCM chipset devices;
- added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
- added initial support for "nstreme-plus";
- added support for "band=5ghz-n/ac";
- added support for "interface-list" for Access List entries;
- added support for legacy AR9485 chipset;
- enable all chains by default on devices without external antennas after configuration reset;
- fixed "wds-slave" channel selection when single frequency is specified;
- fixed incompatibility with macOS clients;
- fixed long "scan-list" entries not working for ARM based wireless interfaces;
- fixed nv2 protocol on ARM platform SXTsq devices;
- fixed RB911-5HnD low transmit power issue;
- fixed RTS/CTS option for the ARM based wireless devices;
- fixed wsAP wrong 5 GHz interface MAC address;
- improved compatibility with specific wireless AC standard clients;
- improved Nv2 PtMP performance;
- improved packet processing on ARM platform devices;
- improved wireless performance on hAP ac^2 devices while USB is being used;
- improved wireless scan functionality;
- enable all chains by default on devices without external antennas after configuration reset;
- enable all chains by default on devices without external antennas after configuration reset;
- removed unused "/interface wireless registration-table monitor" command;
- fixed wireless protocol mode restrictions if lockpack is installed and has limits for it;
- removed unused monitor command from CLI;
- updated "Australia", "Czech Republic", "UK 5.8 Fixed" and "United Kingdom" regulatory domain information;
- fixed wireless protocol mode restrictions if lockpack is installed and has limits for it;
- updated "Czech Republic" country 5.8 GHz frequency range;
- added "allow-signal-out-off-range" option for Access List entries;
- added "indonesia3" regulatory domain information;
- added passive scan option for wireless scan mode;
- added support for CHARGEABLE_USER_ID in EAP Accounting;
- check APs against connect-list rules starting with strongest signal;
- do not show background scan frequencies in the monitor command channel field;
- improved reliability on "rx-rate" selection process;
- increased the EAP message retransmit count;
- log "signal-strength" when successfully connected to AP;
- pass interface MAC address in Sniffer TZSP frames;
- updated "UK 5.8 Fixed" and "Australia" country data;
- updated "united kingdom" regulatory domain information;
- fixed rate selection process when "rate-set=configured" and NV2 protocol is used;
- added "etsi1" and "russia3" regulatory domain information;
- fixed compatibility with "AR5212" wireless chips;
- improved WPA2 key exchange reliability;
- updated "china", "norway" and "new-zealand" regulatory domain information;
- added "etsi1" regulatory domain information;
- improved WPA2 key exchange reliability;
- updated "norway" regulatory domain information;
- added "russia3" country settings;
- added New Zealand regulatory domain information for P2P links;
- updated China and New Zealand regulatory domain information;
- reduced load on CPU for high speed wireless links;
- reduced load on CPU for high speed wireless links;
- added Egypt 5.8 country settings;
- added PEAP authentication support for wireless station mode;
- apply broadcast bit to DHCP requests when using "station-pseudobridge" mode;
- do not allow equal MAC addresses between multiple Virtual APs when same "master-interface" is used;
- fixed RBSXT5HacD2nr2 small channel support;
- fixed crash while running "spectral-scan";
- fixed dynamic wireless interface removal from bridge ports when changing wireless mode;
- fixed false positive DFS radar detection caused by iPhone 6s devices;
- fixed issue when wireless interfaces might not show up in CAP mode;
- fixed occasional crash on interface disabling;
- fixed rare crash on nv2 configurations;
- fixed rare wireless ac interface lockup;
- fixed scan tool stuck in background;
- improved compatibility with Intel 2200BG wireless card;
- update Thailand country frequency settings;
- fixed scan tool stuck in background;
- improved compatibility with Intel 2200BG wireless card;
- added "station-roaming" setting;
- update Thailand country frequency settings;
- show comment on "security-profile" if it is set;
- fixed full "spectral-history" header print on AP modes;
- fixed upgrade from older wireless packages when AP interface had empty SSID;
- show comment on "security-profile" if it is set;
- added API command to report country-list (/interface/wireless/info/country-list);
- added CRL checking for eap-tls;
- fixed action frame handling for WDS nodes;
- fixed custom channel extension-channel appearance in console;
- fixed full "spectral-history" header print on AP modes;
- fixed rare kernel failure when connecting to nv2 access point with legacy rate select;
- fixed upgrade from older wireless packages when AP interface had empty SSID;
- take in account channel width when returning supported channels;
- use VLAN ID 0 in RADIUS message to disable VLAN tagging;
- show DFS flag in country-info command output;