Component: wireless
374 changelog entries across 121 version(s)
Releases by channel (stacked)
- added U-NII-2 support for US and Canada country profiles for cAP ac XL and QRT 5 ac;
- fixed frequency range information on IPQ4019;
- added U-NII-2 support for US and Canada country profiles for hAP ac lite;
- added override for multicast-to-unicast translation of DHCP traffic;
- do not remove channels >2462 MHz from "scanlist" if scanning for fixed channel;
- do not send packet back to station-bridge it was received from;
- fixed minor typo in debug logging messages;
- improve WMM priority assignment for packets with internal priority greater than 7;
- improve regulatory compliance with DFS requirements;
- improve signaling of QCA9984 interface capabilities when using 160/80+80MHz channel width;
- improved system stability when sending packets through interface after L2MTU is increased;
- log client signal strength on disconnect;
- renamed "secondary-channel" to "secondary-frequency";
- updated "israel" regulatory domain information;
- updated "united kingdom" regulatory domain information;
- added U-NII-2 support for US and Canada country profiles for hAP ac lite;
- added U-NII-2 support for US and Canada country profiles for hAP ac^3;
- added U-NII-2 support for US and Canada country profiles for hap ac, hAP ac^3 LTE6, Audience and Audience LTE6;
- updated "israel" regulatory domain information;
- fixed issue with multicast traffic delivery to client devices using power-save;
- improved iOS compatibility with HotSpot 2.0 networks;
- improved iOS compatibility with HotSpot 2.0 networks;
- fixed issue with multicast traffic delivery to client devices using power-save;
- renamed "macedonia" regulatory domain information to "north macedonia";
- updated "indonesia5" regulatory domain information;
- renamed "macedonia" regulatory domain information to "north macedonia";
- added U-NII-2 support for US and Canada country profiles for mANTBox series devices;
- create "connect-list" rule when address specified for "setup-repeater";
- do not override MTU and ARP values from CAPsMAN with local forwarding;
- improved WPS process stability;
- increased "group-key-update" maximum value to 1 day;
- updated "indonesia5" regulatory domain information;
- updated "no_country_set" regulatory domain information;
- added support for U-NII-2 US and Canada country profiles for mANTBox series devices;
- added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
- fixed incorrect wireless capability information in association response frames;
- updated "kazakhstan" regulatory domain information;
- updated "kazakhstan" regulatory domain information;
- added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
- fixed incorrect wireless capability information in association response frames;
- added support for U-NII-2 for wAP ac;
- updated "canada" regulatory domain information;
- updated "united states" regulatory domain information;
- added support for U-NII-2 for cAP ac;
- added support for U-NII-2 for wAP ac;
- allow setting "tx-power" up to 40;
- changed "station-roaming" default setting from "enabled" to "disabled";
- fixed potential wireless driver issue related to CVE-2020-3702;
- improved management service stability when receiving bogus packets;
- updated "bangladesh" regulatory domain information;
- updated "canada" regulatory domain information;
- updated "egypt" regulatory domain information;
- updated "indonesia5" regulatory domain information;
- updated "united states" regulatory domain information;
- allow setting "tx-power" up to 40;
- fixed potential wireless driver issue related to CVE-2020-3702;
- added support for U-NII-2 for cAP ac;
- updated "indonesia5" regulatory domain information;
- changed "station-roaming" default setting from "enabled" to "disabled";
- updated "bangladesh" regulatory domain information;
- updated "egypt" regulatory domain information;
- added "russia 6ghz" regulatory domain information;
- enabled unicast flood for DHCP traffic on ARM architecture access points;
- fixed Nstreme wireless protocol performance decrease;
- improved management service stability when receiving bogus packets;
- updated "egypt" regulatory domain information;
- updated "russia4" regulatory domain information;
- added "skip-dfs-channels" parameter;
- allow using FCC "U-NII-2" frequency range for hAP ac2 and RBwAPGR series devices;
- fixed default "antenna-gain" setting on SXT 2 devices;
- improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
- improved compatibility for "ETSI" wireless country profile;
- improved system stability on hAP ac^2;
- updated "bangladesh" regulatory domain information;
- updated "indonesia4" regulatory domain information;
- updated "south africa" regulatory domain information;
- improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
- improved system stability on hAP ac^2;
- updated "south africa" regulatory domain information;
- added "U-NII-2" support for hAP ac2 and RBwAPGR series devices;
- added "skip-dfs-channels" parameter;
- fixed default "antenna-gain" setting on SXT 2 and LtAP series devices;
- updated "bangladesh" regulatory domain information;
- updated "indonesia4" regulatory domain information;
- improved compatibility for "ETSI" wireless country profile;
- added "ETSI" regulatory domain information;
- added "indonesia4" regulatory domain information;
- added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
- allow using "canada2" regulatory domain on US lock devices;
- fixed sensor MAC address reporting in TZSP header;
- improved compatibility by adding default installation mode and antenna gain for devices with integrated antennas;
- improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;
- improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
- added "russia4" regulatory domain information;
- improved compatibility by adding default installation mode and gain for devices with integrated antennas;
- improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;