Search changelog entries

6.43rc51 Testing 2018-Aug-01 (7 years ago)

Component	Change
bridge	added per-port based "tag-stacking" feature;
bridge	fixed "ingress-filtering", "frame-types" and "tag-stacking" value storing;
bridge	improved bridge port state changing process;
bridge	improved packet processing when bridge port changes states;
bridge	renamed option "vlan-protocol" to "ether-type";
certificate	do not allow to perform "undo" on certificate changes;
crs3xx	added command that forces fan detection on fan-equipped devices;
crs3xx	fixed port disable on CRS326 and CRS328 devices;
dhcpv6-client	allow to set "default-route-distance";
dhcpv6-client	fixed "add-default-route" parameter;
dhcpv6-client	fixed option handling;
dhcpv6-server	added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time";
ethernet	fixed default ethernet advertise values after configuration reset (introduced in v6.43rc33)
filesystem	fixed NAND memory going into read-only mode (requires "factory-firmware" >= 3.41.1 and "current-firmware" >= 6.43);
health	fixed voltage measurements for RB493G devices;
hotspot	allow to properly configure Hotspot directory on external disk for devices that have flash type storage;
hotspot	fixed RADIUS CoA & PoD by allowing to accept "NAS-Port-Id";
ike1	added unsafe configuration warning for main mode with pre-shared-key authentication;
ike1	zero out reserved bytes in NAT-OA payload;
ike2	fixed rekeyed child deletion during another exchange;
ike2	improved basic exchange logging readability;
ipsec	fixed "sa-src-address" deduction from "src-address" in tunnel mode;
ipsec	fixed "static-dns" value storing (CLI only);
ipsec	fixed AES-CTR and AES-GCM key size proposing as initiator;
ldp	properly load LDP configuration;
led	fixed default LED configuration for RBLHGG-5acD-XL devices;
lte	added "registration-status" parameter under "/interface lte info" command;
lte	added additional D-Link PIDs;
lte	added additional low endpoint SIM7600 PIDs;
lte	added signal readings under "/interface lte scan" for 3G and GSM modes;
lte	fixed memory leak on USB disconnect;
lte	fixed SMS send feature when not in LTE network;
lte	ignore empty MAC addresses during Passthrough discovery phase;
lte	properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
multicast	allow to add more than one RP per IP address for PIM;
ospf	improved link-local LSA flooding;
rb1100ahx4	added DES and 3DES hardware acceleration support;
routerboot	removed RAM test from TILE devices (routerboot upgrade required);
sfp	hide "sfp-wavelength" parameter for RJ45 transceivers;
snmp	added "phy-rate" reading for "station-bridge" mode;
snmp	fixed "remote-cap" peer MAC address format;
ssh	strengthen strong-crypto (add aes-128-ctr and disallow hmac sha1 and groups with sha1);
tile	added DES and 3DES hardware acceleration support;
w60g	added distance measurement feature;
w60g	fixed random disconnects;
w60g	improved MCS rate detection process;
w60g	improved MTU change handling;
w60g	properly close connection with station on disconnect;
wireless	fixed "/interface wireless sniffer packet print follow" output;
wireless	fixed packet processing after removing wireless interface from CAP settings;

6.43rc45 Testing 2018-Jul-17 (7 years ago)

Component	Change
ethernet	improved stability when changing ethernet interface L2MTU on CRS328-24P-4S+ (introduced in v6.43rc11);
ipsec	improved invalid policy handling when a valid policy is uninstalled;
lte	added additional ID support for SIM7600 modem;
sfp	fixed default advertised link speeds;
vrrp	fixed VRRP packet processing on VirtualBox and VMWare hypervisors;
winbox	properly display all flags for bridge host entries;
winbox	show "System/RouterBOARD/Mode Button" on devices that has such feature;
wireless	improved Nv2 reliability on ARM devices;

6.43rc44 Testing 2018-Jul-11 (7 years ago)

Component	Change
backup	added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
crs326/crs328	fixed untagged packet forwarding through tagged ports when pvid=1;
crs3xx	fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
dhcpv6	improved reliability on IPv6 DHCP services;
lte	added support for alternative SIM7600 PID;
sms	improved reliability on SMS reader;
w60g	temporary disabled distance measurement feature;

6.42.6 Stable 2018-Jul-06 (7 years ago)

Component	Change
bridge	improved packets processing when bridge port changes states;
crs3xx	fixed bonding slave failover when packets are sent out of the bridge interface;
crs3xx	fixed LACP member failover;
crs3xx	improved link state detection when one side has disabled interface;
defconf	fixed bridge default configuration for SOHO devices with more than 9 Ethernet interfaces;
package	free up used storage space consumed by old RouterOS upgrades;
snmp	fixed w60g "phy-rate" readings;
supout	added "ip-cloud" section to supout file;
w60g	fixed random disconnects;
w60g	general stability and performance improvements;
winbox	added 64,8 GHz frequency to w60g interface frequency settings;
winbox	show "sector-writes" on devices that have such counters;

6.43rc42 Testing 2018-Jul-04 (7 years ago)

Component	Change
check-installation	improved system integrity checking;
chr	fixed interface name order when "virtio-net is not being used on KVM installations;
chr	improved balooning process;
chr	reduced RAM memory required per interface;
defconf	fixed bridge default configuration for SOHO devices with more than 9 Ethernet interfaces;
health	improved speed of health measurement readings;
interface	improved interface "last-link-down-time" and "last-link-up-time" values;
package	free up used storage space consumed by old RouterOS upgrades;
routerboard	fixed wrongly reported RAM size on ARM devices;
snmp	fixed w60g "phy-rate" readings;
w60g	general stability and performance improvements;
winbox	added 64,6 GHz frequency to w60g interface frequency settings;