Search changelog entries
| Component | Change |
|---|---|
| bridge | fixed BOOTP packet forwarding when DHCP Snooping is enabled; |
| certificate | added support for multiple "Subject Alt. Names"; |
| certificate | enabled RC2 cipher to allow P12 certificate decryption; |
| chr | improved system stability when insufficient resources are allocated to the guest; |
| console | updated copyright notice; |
| crs3xx | fixed slow bootup, upgrade and SFP status read (introduced in v6.44beta20); |
| gps | moved "coordinate-format" from "monitor" command to "set" parameter; |
| ike1 | fixed "rsa-key" authentication (introduced in v6.44beta); |
| ipsec | accept only valid path for "export-pub-key" parameter in "key" menu; |
| ipsec | added new "remote-id" peer matcher; |
| ipsec | fixed all policies not getting installed after startup (introduced in v6.43.8); |
| ipsec | moved "profile" menu outside "peer" menu; |
| lcd | made "pin" parameter sensitive; |
| led | fixed default LED configuration for RBSXTsq-60ad; |
| lte | fixed DHCP IP acquire in 3G mode for r11e-lte (introduced in v6.44beta54); |
| lte | fixed reported "rsrq" precision (introduced in v6.43.8); |
| profile | removed obsolete "file-name" parameter; |
| radius | implemented Proxy-State attribute handling in CoA and disconnect requests; |
| rb4011 | improved SFP+ interface linking to 1Gbps; |
| ssh | close active SSH connections before IPsec connections on shutdown; |
| ssh | fixed public key format compatibility with RFC4716; |
| supout | fixed "poe-out" output not showing all interfaces; |
| system | accept only valid path for "log-file" parameter in "port" menu; |
| system | removed obsolete "/driver" command; |
| tr069-client | added "check-certificate" parameter to allow communication without certificates; |
| tr069-client | added support for InformParameter object; |
| tr069-client | fixed certificate verification for certificates with IP address; |
| tr069-client | increased reported "rsrq" precision; |
| vrrp | made "password" parameter sensitive; |
| winbox | added "allow-dual-stack-queue" parameter in "IP/DHCP Server" and "IPv6/DHCP Server" menus; |
| winbox | added "conflict-detection" parameter in "IP/DHCP Server" menu; |
| winbox | added "coordinate-format" parameter in LTE interface settings; |
| winbox | allow specifying interface lists in "CAPsMAN/Access List" menu; |
| winbox | fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths; |
| winbox | fixed L2MTU parameter setting on "W60G" type interfaces; |
| winbox | fixed "LCD" menu not shown on RB2011UiAS-2HnD; |
| winbox | moved "Too Long" statistics counter to Ethernet "Rx Stats" tab; |
| winbox | show "System/RouterBOARD/Mode Button" on devices that have such feature; |
| Component | Change |
|---|---|
| bridge | count routed FastPath packets between bridge ports under FastPath bridge statistics; |
| bridge | fixed BOOTP packet forwarding when DHCP Snooping is enabled; |
| crs317 | fixed packet forwarding when LACP is used with hw=no; |
| dhcpv6-server | allow to add DHCPv6 server with pool that does not exist; |
| ethernet | fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices; |
| ipsec | added new "remote-id" peer matcher (CLI only); |
| l2tp | fixed IPsec secret not being updated when "ipsec-secret" is changed under L2TP client configuration; |
| led | fixed PWR-LINE AP Ethernet LED polarity ("/system routerboard upgrade" required); |
| lte | added initial support for multiple APN for R11e-4G (new modem firmware required); |
| lte | fixed DHCP IP acquire (introduced in v6.43.7); |
| netinstall | do not show kernel failure critical messages in the log after fresh install; |
| routerboard | removed "RB" prefix from PWR-LINE AP devices; |
| sniffer | save packet capture in "802.11" type when sniffing on w60g interface in "sniff" mode; |
| snmp | fixed "rsrq" reported precision; |
| usb | improved power-reset error message when no bus specified on CCR1072-8G-1S+; |
| wireless | added new "installation" parameter to specify router's location; |
| wireless | show indoor/outdoor frequency limitations under "/interface wireless info country-info <country>" command; |
| Component | Change |
|---|---|
| bridge | fixed IPv6 link-local address generation when auto-mac=yes; |
| capsman | fixed "group-key-update" parameter not using correct units; |
| console | properly remove system note after configuration reset; |
| crs3xx | improved data transmission between 10G and 1G ports; |
| dhcpv4-server | fixed dynamic lease reuse after expiration; |
| dhcpv6-server | properly handle DHCP requests that include prefix hint; |
| ethernet | fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices; |
| gps | added "coordinate-format" parameter; |
| led | fixed default LED configuration for RBMetalG-52SHPacn; |
| led | fixed PWR-LINE AP ethernet led polarity ("/system routerboard upgrade" required); |
| lte | disallow setting LTE interface as passthrough target; |
| lte | fixed DHCP IP acquire (introduced in v6.43.7); |
| lte | fixed passthrough functionality when interface is removed; |
| lte | increased reported "rsrq" precision; |
| lte | reset USB when non-default slot is used; |
| package | use bundled package by default if standalone packages are installed as well; |
| resource | fixed "total-memory" reporting on ARM devices; |
| snmp | added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values; |
| switch | fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips; |
| system | fixed situation when all configuration was not properly loaded on bootup; |
| timezone | fixed "Europe/Dublin" time zone; |
| upgrade | automatically uninstall standalone package if already installed in bundle; |
| webfig | do not show bogus VHT field in wireless interface advanced mode; |
| winbox | added "allow-roaming" parameter in "Interface/LTE" menu; |
| winbox | allow to change VHT rates when 5ghz-n/ac band is used; |
| winbox | renamed "Radius" to "RADIUS"; |
| winbox | show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+; |
| wireless | added new "installation" parameter to specify router's location; |
| wireless | improved stability for 802.11ac; |
| wireless | improvements in wireless frequency selection; |
| Component | Change |
|---|---|
| capsman | fixed "group-key-update" parameter not using correct units; |
| certificate | properly flush old CRLs when changing store location; |
| console | properly remove system note after configuration reset; |
| dhcpv6-server | properly handle DHCP requests that include prefix hint; |
| discovery | fixed malformed neighbor information for routers that has incomplete IPv6 configuration; |
| discovery | fixed neighbor discovery for PPP interfaces; |
| export | fixed "silent-boot" compact export; |
| gps | added "coordinate-format" parameter; |
| interface | improved system stability when including/excluding a list to itself; |
| kidcontrol | do not allow users with "read" policy to pause and resume kids; |
| led | fixed default LED configuration for RBMetalG-52SHPacn; |
| log | properly handle long echo messages; |
| lte | added support for more ZTE MF90 modems; |
| lte | disallow setting LTE interface as passthrough target; |
| package | use bundled package by default if standalone packages are installed as well; |
| resource | fixed "total-memory" reporting on ARM devices; |
| snmp | added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values; |
| snmp | do not initialise interface traps on bootup if they are not enabled; |
| switch | fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips; |
| system | fixed situation when all configuration was not properly loaded on bootup; |
| timezone | fixed "Europe/Dublin" time zone; |
| upgrade | automatically uninstall standalone package if already installed in bundle; |
| webfig | do not show bogus VHT field in wireless interface advanced mode; |
| winbox | allow to change VHT rates when 5ghz-n/ac band is used; |
| winbox | renamed "Radius" to "RADIUS"; |
| winbox | show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+; |
| wireless | added new "installation" parameter to specify router's location; |
| wireless | improved stability for 802.11ac; |
| wireless | improvements in wireless frequency selection; |
| Component | Change |
|---|---|
| bgp | properly update keepalive time after peer restart; |
| bridge | fixed BOOTP packet forwarding when DHCP Snooping is enabled; |
| bridge | fixed IPv6 link-local address generation when auto-mac=yes; |
| capsman | always accept connections from loopback address; |
| certificate | added support for multiple "Subject Alt. Names"; |
| cloud | added "ddns-update-interval" parameter; |
| conntrack | added new "loose-tcp-tracking" parameter (equivalent to "nf_conntrack_tcp_loose" in netfilter); |
| console | properly remove system note after configuration reset; |
| crs3xx | improved fan control stability; |
| crs3xx | improved stability when adding ACL rules on CRS326 and CRS328 devices (introduced in 6.44beta39); |
| defconf | fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN; |
| defconf | fixed IPv6 link-local address range in firewall rules; |
| dhcp | added "allow-dual-stack-queue" setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour; |
| dhcpv4-server | added "parent-queue" parameter (CLI only); |
| dhcpv6-server | properly handle DHCP requests that include prefix hint; |
| discovery | detect proper slave interface on bounded interfaces; |
| discovery | fixed malformed neighbor information for routers that has incomplete IPv6 configuration; |
| discovery | send master port in "interface-name" parameter; |
| discovery | show neighbors on actual bridge port instead of bridge itself for LLDP; |
| ethernet | fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices; |
| export | fixed "silent-boot" compact export; |
| fetch | added "http-header-field" parameter; |
| gps | added "coordinate-format" parameter (CLI only); |
| ike2 | allow to match responder peer by "my-id=fqdn" field; |
| ipsec | improved invalid policy handling when a valid policy is uninstalled; |
| kidcontrol | added IPv6 support; |
| kidcontrol | added statistics web interface for kids (http://router.lan/kid-control); |
| led | fixed default LED configuration for RBMetalG-52SHPacn; |
| lte | added "ecno" field for "info" command; |
| lte | disallow setting LTE interface as passthrough target; |
| lte | fixed passthrough functionality when interface is removed; |
| lte | improved SimCom 7100e support; |
| lte | increased reported "rsrq" precision; |
| lte | reset USB when non-default slot is used; |
| package | use bundled package by default if standalone packages are installed as well; |
| ppp | added "at-chat" command; |
| resource | fixed "total-memory" reporting on ARM devices; |
| snmp | added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values; |
| snmp | changed fan speed value type to Gauge32; |
| snmp | removed "rx-sector" ("Wl60gRxSector") value; |
| ssh | fixed public key format compatibility with RFC4716; |
| switch | fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips; |
| system | fixed situation when all configuration was not properly loaded on bootup; |
| timezone | fixed "Europe/Dublin" time zone; |
| traceroute | improved stability when sending large ping amounts; |
| upgrade | automatically uninstall standalone package if already installed in bundle; |
| user | require "write" permissions for LTE firmware update; |
| watchdog | allow specifying DNS name for "send-smtp-server" parameter; |
| webfig | do not show bogus VHT field in wireless interface advanced mode; |
| winbox | added "allow-roaming" parameter in "Interface/LTE" menu; |
| winbox | added "challenge-password" field when signing certificate with SCEP; |
| winbox | added "conflict-detection" parameter in "IP/DHCP server" menu; |
| winbox | added src/dst address and in/out interface list columns to default firewall menu view; |
| winbox | added support for dynamic devices in "IP/Kid Control/Devices" tab; |
| winbox | allow to change VHT rates when 5ghz-n/ac band is used; |
| winbox | fixed missing w60g interface status values; |
| winbox | renamed "Radius" to "RADIUS"; |
| winbox | show "R" flag under "IPv6/DHCP Server/Bindings" tab; |
| winbox | show "Switch" menu on RB4011iGS+5HacQ2HnD; |
| wireless | improvements in wireless frequency selection; |
| wireless | improved system stability for all ARM devices with wireless; |