MikroTik Changelogs

Search changelog entries

6.45beta20 Testing 2019-Mar-25 (7 years ago)
Component Change
certificate made RAM the default CRL storage location;
ike1 adjusted debug packet logging topics;
ipsec fixed freshly created identity not taken in action;
lte allow to specify URL for firmware upgrade "firmware-file" parameter;
sms fixed long message parsing (introduced in v6.45beta19);
wireless fixed 5GHz interface disappearing after upgrade (introduced in v6.45beta19);
6.45beta19 Testing 2019-Mar-22 (7 years ago)
Component Change
certificate added support for ECDSA certificates (prime256v1, secp384r1, secp521r1) (CLI only);
certificate removed DSA (D) flag;
ike1 improved stability for transport mode policies on initiator side;
ike2 added support for ECDSA certificate authentication (rfc4754);
ike2 prefer SAN instead of DN from certificate for ID payload;
ipsec renamed "rsa-signature" authentication method to "digital-signature";
smb fixed possible buffer overflow;
sms added USSD message functionality under "/tool sms" (CLI only);
ssh do not generate host key on configuration export;
wireless improved DFS radar detection when using non-ETSI regulated country;
6.45beta16 Testing 2019-Mar-18 (7 years ago)
Component Change
dhcpv4-server improved stability when performing "check-status" command;
ike2 do not send "User-Name" attribute to RADIUS server if not provided;
ike2 improved XAuth identity conversion on upgrade;
ipsec added dynamic comment field for "active-peers" menu inherited from identity (CLI only);
ipsec added "ph2-total" counter to "active-peers" menu (CLI only);
ipsec added support for RADIUS accounting;
ipsec added traffic statistics to "active-peers" menu (CLI only);
ipsec do not allow adding identity to a dynamic peer;
ipsec renamed "remote-peers" to "active-peers" (CLI only);
lte use default APN name "internet" when not provided;
proxy increased minimal free RAM that can not be used for proxy services;
switch properly reapply settings after switch chip reset;
6.44.1 Stable 2019-Mar-13 (7 years ago)
Component Change
bridge fixed possible memory leak when using "ingress-filtering=yes" on bridge interface;
certificate force 3DES encryption for P12 certificate export;
dhcp fixed dual stack queue addition;
dhcpv6-server use MAC address for RADIUS user when "allow-dual-stack-queue=yes";
e-mail fixed missing "from" address for sent e-mails (introduced in v6.44);
gps increase precision for dd format;
gps removed unnecessary leading "0" for dd format;
ipsec allow identities with empty XAuth login and password if RADIUS is enabled (introduced in v6.44);
ipsec fixed dynamic L2TP peer and identity configuration missing after reboot (introduced in v6.44);
ipsec use "remote-id=ignore" for dynamic L2TP configuration (introduced in v6.44);
ipv6 do not allow setting "preferred-lifetime" longer than "valid-lifetime";
lte do not show "session-uptime" if session is not up;
lte fixed LTE interface band setting on RBSXTLTE3-7 (introduced in v6.44);
rb4011 fixed ether10 failing to auto negotiate link speed to 1Gbps;
winbox added "use-local-address" parameter in "IP/Cloud" menu;
wireless fixed antenna gain setting on RBSXT5nDr2;
6.43.13 Long-term 2019-Mar-13 (7 years ago)
Component Change
bridge count routed FastPath packets between bridge ports under FastPath bridge statistics;
bridge fixed BOOTP packet forwarding when DHCP Snooping is enabled;
bridge fixed packet forwarding with enabled DHCP Snooping and Option 82;
bridge fixed possible memory leak when using "ingress-filtering=yes" on bridge interface;
bridge fixed system's identity change when DHCP Snooping is enabled (introduced in v6.43);
capsman always accept connections from loopback address;
certificate force 3DES encryption for P12 certificate export;
dhcp fixed dual stack queue addition;
dhcpv6-server allow to add DHCPv6 server with pool that does not exist;
dhcpv6-server fixed missing gateway for binding's network if RADIUS authentication was used;
ethernet added "tx-rx-1024-max" counter to Ethernet stats;
ethernet fixed packet forwarding when SFP interface is disabled on hEX S;
fetch improved file downloading to slow memory;
gps increase precision for dd format;
gps removed unnecessary leading "0" for dd format;
ipsec fixed all policies not getting installed after startup (introduced in v6.43.8);
ipsec fixed stability issues after changing peer configuration (introduced in v6.43);
ipv6 do not allow setting "preferred-lifetime" longer than "valid-lifetime";
kidcontrol added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters;
kidcontrol fixed validation checks for time intervals;
led fixed default LED configuration for RBSXTsq-60ad;
lldp fixed missing capabilities fields on some devices;
lte do not show "session-uptime" if session is not up;
lte improved SIM7600 initialization after reset;
netinstall do not show kernel failure critical messages in the log after fresh install;
ntp-client fixed "dst-active" and "gmt-offset" being updated after synchronization with server;
ppp fixed dynamic route creation towards VPN server when "add-default-route" is used;
rb4011 fixed ether10 failing to auto negotiate link speed to 1Gbps;
smb added commenting option for SMB users (CLI only);
smb fixed macOS clients not showing share contents;
smb fixed Windows 10 clients not able to establish connection to share;
ssh close active SSH connections before IPsec connections on shutdown;
supout fixed "poe-out" output not showing all interfaces;
supout fixed Profile output on single core devices;
winbox added "conflict-detection" parameter in "IP/DHCP Server" menu;
winbox added "coordinate-format" parameter in LTE interface settings;
winbox added "use-local-address" parameter in "IP/Cloud" menu;
winbox allow specifying interface lists in "CAPsMAN/Access List" menu;
winbox fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths;
winbox fixed "LCD" menu not shown on RB2011UiAS-2HnD;
winbox moved "Too Long" statistics counter to Ethernet "Rx Stats" tab;
winbox show "System/RouterBOARD/Mode Button" on devices that have such feature;
wireless fixed antenna gain setting on RBSXT5nDr2;
wireless improved antenna gain setting for devices with built in antennas;
wireless improved AR5212 response to incoming ACK frames;
wireless improved connection stability for new model Apple devices;