Search changelog entries
| Component | Change |
|---|---|
| bgp | do not reflect route back to sender; |
| bgp | fixed connection establishment using link-local addresses; |
| dns | fixed resolution of static CNAME DNS names (introduced in v7.7beta); |
| ike2 | added support for ChaChaPoly1305 encryption; |
| port | restored missing AT/modem channel on KNOT (introduced in v7.7beta6); |
| Component | Change |
|---|---|
| bgp | properly set "bgp-ext-communities" from "communities" list; |
| dns | fixed handling of FWD entries where "forward-to" is a hostname; |
| dns | improved service stability when CNAME points to a FWD entry; |
| hotspot | improved limitation of maximum allowed connections; |
| ipsec | improved IKE payload processing; |
| snmp | improved stability when receiving bogus packets; |
| wifiwave2 | improved compliance with regulatory domain information; |
| Component | Change |
|---|---|
| certificate | improved Let's Encrypt logging and error recovery; |
| disk | added support for manual RAM file system (TMPFS) creation (CLI only); |
| dns | fixed regex matching (introduced in v7.7beta9); |
| dns | fixed resolving of FWD entries (introduced in v7.7beta8); |
| dns | require "write" policy for DNS cache flushing; |
| dns | respond with lowest TTL for inner queries containing A, AAAA, CNAME chains; |
| ike1 | disallow "remote-id" setting for identity; |
| interface | show RTL8153 CDC Modem Device as ethernet; |
| ipsec | added "current-address" parameter for peers with DNS address; |
| leds | fixed default LED configuration on netFiber 9; |
| leds | fixed turning off LEDs after system shutdown; |
| lte | properly show leading zeros in MCC and MNC strings; |
| modem | added USB tethering support for Google Pixel 7 devices; |
| mpls | fixed assigning of explicit null label for IPv6; |
| ovpn | added support for IPv6 tunneling; |
| switch | improved 10G, 25G and 40G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches; |
| switch | improved system stability when routing traffic over CPU on 98DX224S, 98DX226S, 98DX3236, 98DX8208 switch chips (introduced in v7.7beta3); |
| swos | fixed SwOS configuration changes from RouterOS; |
| wifiwave2 | added information of per-station throughput in the registration table; |
| wifiwave2 | fixed authentication issues (introduced in 7.7beta8); |
| winbox | added "bus" parameter for "USB Power Reset" command on Chateau ax; |
| winbox | added missing "force" parameter for new "IP/DHCP Server/Options" entries; |
| winbox | added missing "vlan-id" column under "IP/Hotspot/Hosts" table; |
| winbox | do not show LACP related status parameters for other bonding types; |
| winbox | fixed default MTU value for CAP interfaces; |
| winbox | increased maximum number of Winbox read-only sessions 5->25; |
| winbox | removed bogus VRF tab from "Interface" menu; |
| winbox | show "Switch" menu on NetFiber 9; |
| winbox | show dynamic comment in WifiWave2 registration table; |
| wireless | fixed "nstreme" related parameter control in skins; |
| Component | Change |
|---|---|
| bgp | added comment functionality for BGP VPN (CLI only); |
| bluetooth | added unique advertise message filtering; |
| bridge | fixed master port conversion; |
| bridge | fixed R/M/STP bridge identifier on protocol-mode change; |
| conntrack | improved system stability when processing SCTP connections on TILE; |
| disk | improved external storage file system mounting, formatting and naming; |
| dns | fixed resolving of FWD entries (introduced in v7.7beta8); |
| dns | improved resolved static entry addition to address list; |
| health | fixed firmware update process on CCR1036-8G-2S+ (introduced in v7.7beta8); |
| hotspot | improved system stability when clients migrate between bridge ports or VLANs; |
| ike2 | fixed rekey notify creation; |
| interface | do not allow adding invalid "veth" interfaces; |
| l3hw | fixed host offloading in a case of MAC address change; |
| l3hw | fixed offloaded NAT for CRS309 switch; |
| lte | added AT channel support for Telit FN990; |
| netinstall | fixed netinstal procedure on RouterBOOT versions from 3.27 to 6.41; |
| ovpn | added "CBC" postfix to AES cipher names; |
| ovpn | added hardware acceleration support for IPQ-6010; |
| switch | improved 10G, 25G, 40G and 100G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches; |
| switch | increased the maximum value of "rate" for ACL rules; |
| vrrp | always use slave interface MTU; |
| vrrp | improved interface stability on configuration changes; |
| webfig | fixed accessing of WebFig when "Interface" menu is disabled by skin; |
| wifiwave2 | released packages for MMIPS, PPC, TILE and x86; |
| x86 | added support for SUN 10G NICs; |
| x86 | improved igc driver support; |
| Component | Change |
|---|---|
| branding | fixed identity setting from branding package; |
| bridge | fixed host moving with fast-path; |
| bridge | removed "age" monitoring property from the host table; |
| container | fixed tar extracting; |
| dns | do not query upstream DNS servers for matched regex records; |
| dns | fixed changing of "forward-to" parameter for FWD entries; |
| dns | fixed handling of CNAME entry pointing to another FWD entry; |
| hotspot | added "install-hotspot-queue" parameter to control dynamic queue creation (CLI only); |
| ike1 | fixed XAuth responder trying to recreate phase 1; |
| ike2 | improved certificate payload parsing; |
| ipsec | added support for AVX optimized SHA acceleration; |
| ipsec | improved "H" (hw-aead) flag presence for accelerated SA's; |
| ipsec | improved configuration of IPsec proposal auth-algorithms; |
| ipsec | improved IKE payload processing; |
| l3hw | improved system stability when disabling or enabling L3HW offloading; |
| lte | fixed error handling on opening AT control channel; |
| lte | show band number in "ca-band" in NSA mode on Chateau 5G; |
| mpls | added VPLS LDP information in remote/local-mappings; |
| netinstall | added "-i <interface>" parameter for Netinstall (CLI Linux); |
| netinstall | improved automatic netbooting interface selection; |
| netwatch | added support for "https-get" type (CLI only); |
| ovpn | added "route-nopull" option for client side; |
| ovpn | added support for IPv6 tunnelling; |
| package | fixed missing menus when both "lora" and "wifiwave2" packages are installed; |
| ppp | fixed displaying of "info" command for PPP client; |
| ppp | improved authentication method negotiation; |
| sfp | added 2.5G SFP module support for RB5009; |
| ssh | added support for Ed25519 key exchange; |
| ssh | fixed handling of non standard size RSA keys; |
| switch | fixed egress mirror for 98DX4310 and 98DX8525 switches; |
| switch | fixed Ethernet monitor when disabling auto-negotiation for 10G interfaces for 98DX8212 switch (introduce in v7.7beta3); |
| switch | improved 10G, 25G and 40G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98DX8525, 98PX1012 switches; |
| switch | improved 25G interface stability for 98PX1012, 98DX4310 and 98DX8525 switches (introduced in v7.6); |
| swos | fixed "allow-from-ports" setting; |
| vpls | expose VPLS related debug logs to "vpls" logging topic; |
| w60g | improved system stability for Cube Pro devices; |
| webfig | fixed displaying of VRF routes; |
| webfig | properly show limited number of available options; |
| wifiwave2 | added "ft-preserve-vlanid" parameter to control whether to change VLAN ID after FT; |
| wifiwave2 | added initial CAPsMAN support (only compatible with wifiwave2 interfaces) (CLI only); |
| wifiwave2 | fixed "radio-mac" provisioning matcher; |
| wifiwave2 | fixed 4-way handshake with TKIP; |
| wifiwave2 | improved general system stability; |