Search changelog entries
| Component | Change |
|---|---|
| bridge | fixed bridge host ageing timeout behaviour (introduced in 7.12beta8); |
| led | fixed CRS312 Ethernet port LED functionality (introduced in 7.12rc1); |
| led | fixed 5G modem mobile network category LED colours; |
| ospf | fixed OSPFv3 authentication header length calculation; |
| pimsm | fixed BSR update process; |
| pimsm | fixed UIB update process; |
| qsfp | fixed incorrect QSFP temperature readings in negative temperature; |
| route | fixed VRF functionality on devices where "single-process" routing process mode is enabled (introduced in 7.12rc1); |
| sfp | fixed link establishment after forced speed changes for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1); |
| sfp | fixed link establishment with passive copper cables for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1); |
| Component | Change |
|---|---|
| bfd | fixed sessions when setting VRF; |
| bfd | improved system stability; |
| console | improved system stability; |
| rename "address" property to "server"; | |
| flash | show more accurate "total-hdd-space" resource property; |
| gps | expose GPS port for Quectel EM12-G (vendor-id="0x2c7c", device-id="0x0512"); |
| ike1 | fixed invalid key length on phase1 negotiation; |
| interface | added "macvlan" interface support; |
| l3hw | prioritize local IP addresses over the respective /32 and /128 routes; |
| leds | fixed "wireless-status" and "wireless-signal-strength" for wireless interfaces (introduced in v7.12beta7); |
| netinstall-cli | updated configuration option description; |
| pimsm | improved system stability; |
| poe-out | improved "auto" mode for devices with single PoE-out port; |
| qsfp | improved auto link detection for AOC cables; |
| route | added "single-process" configuration setting, enabled by default on devices with 64MB or less RAM memory; |
| route | added "suppress-hw-offload" setting for IPv6 routes; |
| sfp | added 5Gbps rate for SFP+ interface on 98DX224S, 98DX226S, and 98DX3236 switch chips; |
| sfp | fixed failed auto-negotiation for RB5009 devices (introduced in v7.12beta3); |
| sfp | improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips; |
| tftp | fixed empty file name matching; |
| webfig | fixed interface addition (introduced in v7.12beta7); |
| wifiwave2 | added an alternative QoS priority assignment mechanism based on IP DSCP; |
| wifiwave2 | added station-bridge interface mode; |
| wifiwave2 | implemented an option to transmit IP multicast packets as unicasts; |
| wifiwave2 | use CAPsMAN's "datapath.vlan-id" on CAP for bridge port "pvid"; |
| winbox | added "Addresses" property under "Routing/BFD/Configuration" menu; |
| winbox | added "BUS" property for USB Power Reset button for LtAP-2HnD and CCR1072; |
| winbox | added "USB" button under "System/RouterBOARD" menu for LtAP-2HnD; |
| winbox | added Enable/Disable button under "Routing/RIP/Static Neighbors" menu; |
| winbox | added missing properties under "WifiWave2" menu; |
| winbox | do not show "F" flag for disabled entries under "IP/Routes" menu; |
| winbox | fixed "Do" property under "Routing/Filters/Select Rule" menu; |
| winbox | fixed "Range" property under "Routing/Filters/Num Set" menu; |
| winbox | fixed "Switch" menu for CCR2004-16G-2S+; |
| winbox | improved support for certain properties under "WifiWave2/Interworking Profiles" menu; |
| winbox | show "unknown" value for "FS" property under "System/Disks" menu if the data is not available; |
| wireguard | added "auto" and "none" parameter for "private-key" and "presharde-key" parameters; |
| wireguard | allow to specify client settings under peer menu which will be included in configuration file and QR code; |
| Component | Change |
|---|---|
| bfd | improved system stability; |
| bgp | fixed "input.filter-chain" argument selection in VPN configuration; |
| bgp | improved logging; |
| bluetooth | added basic support for connecting to BLE peripheral devices; |
| console | export required properties with default values; |
| console | improved system stability; |
| console | restrict permissions to "read,write,reboot,ftp,romon,test" for scripts executed by DHCP, Hotspot, PPP and Traffic-Monitor services; |
| l3hw | fixed IPv6 route suppression; |
| led | fixed "interface-status" configuration for virtual interfaces; |
| lora | added LNS protocol support; |
| lte | changed R11e-LTE ARP behavior to NoArp; |
| lte | fixed sub-interface auto-removal in multiple APN setups; |
| lte | show correct data class when connected to 5G SA network; |
| mqtt | added on-message feature for subscribed topics; |
| mqtt | added parallel-scripts-limit parameter to set maximum allowed number of scripts executed at the same time; |
| mqtt | added wildcard topic subscription support; |
| netinstall | added option to discard branding package; |
| netinstall | display package filename in GUI Descption column if package description is not specified; |
| netinstall-cli | added option to discard branding package; |
| netinstall-cli | allow ".rsc" script filenames; |
| poe-out | driver optimization for AF/AT controlled boards; |
| poe-out | fixed rare CRS328 poe-out menu and poe-out port config loss after reboot; |
| route | added "single-process" configuration setting, enabled by default on devices with 64MB or less RAM memory (CLI only); |
| route | added "suppress-hw-offload" setting for IPv6 routes; |
| route | reverse community "delete" and "filter" command behavior; |
| routerboard | added "reset-button" support for RB800, RB1100 and RB1100AHx2 devices; |
| sfp | fixed 25Gbps link with FEC91 (introduced in v7.12beta7); |
| snmp | changed "mtxrGaugeValue" type to integer; |
| switch | fixed packet forwarding between Ethernet ports for CRS354 switches (introduced in v7.12beta7); |
| webfig | fixed timezone for interface "Last Link Down/Up Time"; |
| wifiwave2 | correctly add interface to specified "datapath.interface-list"; |
| wifiwave2 | fixed re-connection failures for 802.11ax interfaces in station mode; |
| wifiwave2 | limit L2MTU to 1560 until a fix is available for a bug causing interfaces to fail transmitting larger frames than that; |
| wifiwave2 | log more information regarding authentication failures; |
| winbox | added "Host Key Type" setting under "IP/SSH" menu; |
| winbox | added "Key Owner" setting under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus; |
| winbox | added "Remote Min Tx" parameter under "Routing/BFD/Session" menu; |
| winbox | added "Startup Delay" setting under "Tools/Netwatch" menu; |
| winbox | added "Use BFD" setting under "Routing/RIP/Interface-Template" menu; |
| winbox | added MQTT subscription menu; |
| winbox | allow to specify server as DNS name under "Tools/Email" menu; |
| winbox | rename "DSCP" setting to "DSCP (+ECN)" under "Tools/Traffic-Generator/Packet-Templates" menu; |
| winbox | rename "Name" setting to "List" under "IP,IPv6/Firewall/Address-List" menu; |
| winbox | rename "Password" button to "Change Now" under "System/Password" menu; |
| wireguard | added "auto" parameter for "private-key" and "presharde-key" parameters; |
| wireguard | request public or private key to be specified in order to create peer; |
| x86 | igb updated driver to 5.14.16 version; |
| x86 | igbvf updated driver from in-tree Linux kernel; |
| x86 | updated latest available pci.ids; |
| Component | Change |
|---|---|
| www | improved service stability when receiving malformed packets; |
| Component | Change |
|---|---|
| api | fixed fetching objects with warning option from REST API; |
| bgp | implemented IGP metric sending in BGP messages; |
| bluetooth | use "g" units when decoding MikroTik beacon acceleration on peripheral devices menu; |
| certificate | allow to remove issued certificates when CRL is not used; |
| certificate | fixed certificate auto renewal via SCEP; |
| chr | iavf updated driver to 4.9.1 version; |
| console | improved randomness for ":rndstr" and ":rndnum" commands; |
| console | improved stability when using "special-login"; |
| console | improved system stability through RoMON session; |
| console | improved system stability when using autocomplete; |
| dhcp | fixed DHCP server "authoritative" and "delay-threshold" settings (introduced in v7.12beta3); |
| ike2 | improved rekey collision handling; |
| ipsec | fixed Diffie-Hellman public value encoding size; |
| ipsec | fixed minor typo in logs; |
| ipsec | reduce disk writes when started without active configuration; |
| ipv6 | send RA and RA deprecate messages out three times instead of just once; |
| l3hw | improved system stability during IPv6 route offloading; |
| leds | added "dark-mode" functionality for RBwAPG-5HacD2HnD; |
| leds | added "wireless-status" and "wireless-signal-strength" configuration types for wifiwave2 interfaces; |
| log | improved logging for user actions; |
| lte | fixed 5G data-class reporting for Chateau 5G; |
| lte | fixed APN authentification in multi APN setup for R11e-LTE6; |
| lte | fixed IPv6 prefix for MBIM modems in multi-apn setup when IPv6 APN used as not first APN; |
| lte | fixed RSSI for FG621-EA modem to show the correct value; |
| lte | fixed startup race condition when SIM card is in "up" slot for LtAP mini; |
| mpls | improved FastPath next-hop selection hash algorithm; |
| netinstall-cli | added empty configuration option "-e"; |
| netwatch | decreased "thr-tcp-conn-time" maximum limit to 30 seconds; |
| ovpn | improved system stability; |
| pimsm | improved system stability; |
| qsfp | added 50Gbps rate support for QSFP28 interfaces; |
| qsfp | fixed sub-interface EEPROM monitor data output (introduced in v7.12beta3); |
| qsfp | improved auto link detection for 100G CWDM4 modules and AOC cables (introduced in v7.12beta3); |
| qsfp | use sub-interface configuration for establishing link (for 40Gbps and 100Gbps links, all sub-interfaces must be enabled); |
| routerboard | added "reset-button" support for RB800 and RB1100 devices; |
| ssh | improved connection stability when pasting large chunks of text into console; |
| supout | added interface list members section; |
| switch | improved resource allocation for 98DX224S, 98DX226S, and 98DX3236 switch chips; |
| traffic-generator | fixed traffic-generator on CHR and x86; |
| usb | added support for RTL8153 USB ethernet on ARM, ARM64 and x86; |
| vrf | limit maximum VRFs to 1024; |
| vxlan | improved system stability for Tile devices; |
| webfig | fixed "Days" property configuration change under "IP/Firewall" menu; |
| webfig | fixed timezone for interface "Last Link Down/Up Time"; |
| webfig | improved Webfig performance and responsiveness; |
| webfig | try to re-establish connection after disconnect; |
| wifiwave2 | added an alternative QoS priority assignment mechanism based on IP DSCP (CLI only); |
| wifiwave2 | added station-bridge interface mode (CLI only); |
| wifiwave2 | do not show default "l2mtu" on compact export; |
| wifiwave2 | fixed PTK renewal for interfaces in station mode; |
| wifiwave2 | fixed sniffer command not receiving any QoS null function frames when using 802.11ax radios; |
| wifiwave2 | fixed untagged VLAN 1 entry when using "vlan-id" setting together with vlan-filtering bridge; |
| wifiwave2 | fixed warning on CAP devices when radar detected; |
| wifiwave2 | implemented an option to transmit IP multicast packets as unicasts (CLI only); |
| wifiwave2 | improved compliance with regulatory requirements; |
| wifiwave2 | make 4-way handshake procedure more robust when acting as supplicant (client); |
| winbox | added "Comment" under "Routing/BFD/Configuration" menu; |
| winbox | added "g" flag under "IPv6/Routes" menu; |
| winbox | added "Name Format" property under "WifiWave2/Provisioning" menu; |
| winbox | changed "MBR Partition Table" checkbox to unchecked by default under "System/Disks/Format-Drive" menu; |
| winbox | fixed "Address" property under "WifiWave2/Remote-CAP" menu; |
| winbox | fixed "Group Key Update" maximum value under "WifiWave2/Security" menu; |
| winbox | fixed entry numbering and ordering under "WifiWave2/Provisioning" menu; |
| winbox | fixed minor typos; |
| wireguard | allow to specify client settings under peer menu which will be included in configuration file and QR code; |
| wireguard | generate Wireguard peer keys and preshared-key automatically, if value is specified but is not base64 string; |
| wireguard | removed "wg-add-client" configuration wizard (introduced in v7.12beta3); |
| wireless | added more "radius-mac-format" options (CLI only); |
| www | fixed allowed address setting for REST API users; |
| www | fixed fragmented POST data for SCEP service; |
| x86 | i40e updated driver to 2.23.17 version; |
| x86 | igc updated driver to 5.10.194 version; |
| x86 | ixgbe updated driver to 5.19.6 version; |
| x86 | Realtek r8169 updated driver; |