Component: sfp

7.15beta9 Testing 2024-Mar-27 (2 years ago)

• added "100M-baseFX" link mode support for compatible devices;

7.15beta8 Testing 2024-Mar-21 (2 years ago)

• fixed "sfp-tx-fault" state indication for CRS510;
• improved auto-negotiation linking for some MikroTik cables and modules;
• improved system stability with some GPON modules for CCR2004 and CCR2116 devices;

7.15beta6 Testing 2024-Mar-08 (2 years ago)

• improved system stability for CR2004-1G-2XS-PCIe (introduced in v7.14);

7.14.1 Stable 2024-Mar-08 (2 years ago)

• improved system stability for CR2004-1G-2XS-PCIe (introduced in v7.14);

7.15beta4 Testing 2024-Mar-04 (2 years ago)

• added "100M-baseFX" link mode support for compatible devices;
• added "sfp-ignore-rx-los" setting;
• fixed link establishment with 100Mbps optical modules (requires "/interface ethernet reset" or adding "100M-baseFX" modes for advertise or speed properties);
• fixed missing Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases;
• ignore SFP RX LOS signal for modules with bad EEPROM;
• improved "sfp-tx-power" value monitoring in certain cases;

7.14 Stable 2024-Feb-29 (2 years ago)

• added support for modules requiring single byte I2C read transactions;
• fixed corrupted Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases;
• fixed corrupted Tx traffic at 10Gbps rate on RB4011 in rare cases;
• improve high-power SFP module initialization;
• improved combo-sfp handling for CRS328-4C-20S-4S+;
• improved link establishment for RB4011 devices;

7.14beta10 Testing 2024-Feb-06 (2 years ago)

• fixed corrupted Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases;

7.14beta9 Testing 2024-Feb-01 (2 years ago)

• fixed corrupted Tx traffic at 10Gbps rate on RB4011 in rare cases;

7.13.2 Stable 2024-Jan-12 (2 years ago)

• improved combo-sfp handling for CRS328-4C-20S-4S+;
• improved link establishment for RB4011 devices;

7.14beta6 Testing 2024-Jan-10 (2 years ago)

• added support for modules requiring single byte I2C read transactions;
• improved link establishment for RB4011 devices;

7.14beta4 Testing 2023-Dec-29 (2 years ago)

• improved combo-sfp handling for CRS328-4C-20S-4S+;

7.14beta3 Testing 2023-Dec-19 (2 years ago)

• improve high-power SFP module initialization;

7.13 Stable 2023-Dec-14 (2 years ago)

• added "1G-baseT" link mode for modules that supports "2.5G-baseT" mode;
• allow 2.5G rates only in forced link mode;
• fixed link establishment with S+DA0001 DAC cables;
• ignore irrelevant extended compliance code for SFP modules;
• improved SFP interface handling for 98DX224S, 98DX226S, 98DX3236, 98DX8208, and 98DX8216 switch chips;
• improved link establishment for SFP copper modules;
• improved link establishment with certain modules for hEX S device;
• show 10M and 100M supported rates for RJ45 copper modules;

7.13rc4 Testing 2023-Dec-12 (2 years ago)

• improved link establishment for SFP copper modules;

7.13rc3 Testing 2023-Dec-06 (2 years ago)

• fixed link establishment with S+DA0001 DAC cables;
• improved link establishment for SFP copper modules;

7.13beta3 Testing 2023-Nov-24 (2 years ago)

• added "1G-baseT" link mode for modules that supports "2.5G-baseT" mode;
• allow 2.5G rates only in forced link mode;
• fixed SFP and combo interface handling for CRS328-4C-20S-4S+ device (introduced in 7.13beta1);
• ignore "rx-loss" in forced link mode;
• ignore irrelevant extended compliance code for SFP modules;
• show 10M and 100M supported rates for RJ45 copper modules;

7.12 Stable 2023-Nov-09 (2 years ago)

• added 5Gbps rate for SFP+ interface on 98DX224S, 98DX226S, and 98DX3236 switch chips;
• fixed missing "rx-power" monitor with certain modules (introduced in v7.10);
• fixed occasional bad EEPROM data reading for L009 devices;
• improved interface stability for SFP and QSFP types of interfaces;
• improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips;

7.13beta1 Testing 2023-Nov-09 (2 years ago)

• improved link establishment with certain modules for hEX S device;
• improved SFP interface handling for 98DX224S, 98DX226S, 98DX3236, 98DX8208, and 98DX8216 switch chips;

7.12rc7 Testing 2023-Nov-08 (2 years ago)

• fixed occasional bad EEPROM data reading for L009 devices;

7.12rc5 Testing 2023-Nov-02 (2 years ago)

• fixed 1Gbps advertise for L009 devices (introduced in v7.12beta3);
• fixed 1Gbps advertise using SFP+ or SFP28 modules in SFP interface (introduced in v7.12beta3);
• improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips;

7.12rc4 Testing 2023-Oct-27 (2 years ago)

• fixed incorrect link speed when changing link modes (introduced in v7.12beta3);

7.12rc2 Testing 2023-Oct-16 (2 years ago)

• fixed link establishment after forced speed changes for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1);
• fixed link establishment with passive copper cables for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1);

7.12rc1 Testing 2023-Oct-05 (2 years ago)

• added 5Gbps rate for SFP+ interface on 98DX224S, 98DX226S, and 98DX3236 switch chips;
• fixed failed auto-negotiation for RB5009 devices (introduced in v7.12beta3);
• improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips;

7.12beta9 Testing 2023-Sep-25 (2 years ago)

• fixed 25Gbps link with FEC91 (introduced in v7.12beta7);

7.12beta3 Testing 2023-Aug-24 (3 years ago)

• improved interface stability for SFP and QSFP types of interfaces;