Component: general
187 changelog entries across 70 version(s)
Releases by channel (stacked)
- fix routerboot upgrading if RouterOS is partitioned;
- add support for second serial port on CCR boards;
- fix serial port baudrate selection on CCR boards;
- ethernet interface stats that are behind switch chip show real hw stats instead of just the traffic that goes through cpu;
- fixed watchdog on mipsle boards;
- fixed usb Yota LTE modem hangup;
- improved CCR responsiveness on other interfaces when one interface is under attack;
- eoip,gre tunnels could occasionally crash multicore router;
- ipsec sometimes could crash kernel on CCR;
- connection tracking sometimes could crash kernel on CCR;
- winbox, webfig: allow to enter space in the text fields;
- fixed crash when setting master-port on AR8327 switch chips;
- added /ip settings allow-hw-fast-path setting to control AR8327N hardware ipv4 fast path;
- fixed memory amount issue on RB1100AHx2;
- improved queue statistics updating;
- fix 1G linking with some Cisco devices (affects RB7xx, RB9xx, RB1100, RB2011, CCR);
- increased max l2mtu on CCR to 10226 bytes;
- fixed crash on RB1200;
- fix reboot when running on third party hypervisors;
- fixed wifi led order on "SXT Lite5";
- fixed "export compact" in "ip proxy";
- fix MPLS MTU configuration usage;
- manual upgrade to NEW beta poe controller firmware v2.0 for RB750UP and OmniTIK UPA; more info at http://wiki.mikrotik.com/wiki/Manual:PoE-Out
- fix RB951-2n wireless issues;
- fix ticking sound on RB411UAHL;
- fix routerboard firmware upgrade on RB951-2n;
- sniffer/torch + simple queues sometimes could crash router;
- fixed upgrade problem when it failed with error "disk is too small" while there was plenty of space left;
- fix health and poe access reliability on OmniTIK UPA and RB750UP boards;
- fix bad block count not to increase on Samsung K9F1208U0C nand;
- fix RB1100 crash on interface disable/l2mtu change/reboot;
- dns could not resolve some domain names, was ignoring replies with DNAME RRs;
- ping times improved on Nv2 high data rate wireless links;
- add pw-type option for BGP VPLS;
- reset packet mark when encapsulating/decapsulating from eoip,ipip,gre,eoipv6,ipipv6,gre6 tunnels
- fixed rare configuration retention problems on RB1100AHx2;
- implemented simple SMB (windows file sharing) server;
- added QuickSet to RBSXT, RB411, RB711;
- added support for LTE modems (cdc ethernet type);
- fix gre tunnels on x86 and other little endian machines;
- eoip: swap tunnel id bytes to be compatible with previous versions;
- eoip,gre: fix setting config
- improved webfig look;
- updated timezone information;
- added ipv6 prefix pools;
- improved ipv4 forwarding performance on all boards with simple configuration by up to 30%;
- add passthrough setting to change-dscp, change-ttl, change-mss, strip-ipv4-options, change-hop-limit mangle targets;
- fixed occasional print command stalling when lots of items;
- fixed RB1100 ether11,12,13 and RB800 ether3 resetting problem;
- implemented usb power-reset command on RB SXT 5HnD;
- wireless-nv2 package now includes the same fixes as RouterOS v5rc11;
- added support for ethernet switch configuration in WinBox;
- allow to configure 11n wireless rate tx powers in WinBox;