MikroTik Changelogs

Search changelog entries

6.41rc34 Testing 2017-Sep-27 (8 years ago)
Component Change
crs3xx improved packet processing in slowpath;
defconf fixed RouterOS default configuration (introduced in v6.40.3);
ethernet removed "master-port" parameter;
log fixed "unknown" interface name in log messages;
lte added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
lte do not reset modem when it is not possible to access SMS storage;
snmp fixed "ifHighSpeed" value of VLAN, VRRP and Bonding interfaces;
snmp fixed "/caps-man registration-table" uptime values;
tile improved hardware encryption processes;
vlan do not allow VLAN MTU to be higher than L2MTU;
wireless fixed rate selection process when "rate-set=configured" and NV2 protocol is used;
6.41rc32 Testing 2017-Sep-21 (8 years ago)
Component Change
bridge added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
bridge implemented software based "igmp-snooping";
console do not stop "/certificate sign" process if console times out in 1 minute;
lte added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
traceroute improved "/tool traceroute" results processing;
wireless log "signal-strength" when successfully connected to AP;
6.41rc31 Testing 2017-Sep-20 (8 years ago)
Component Change
crs317 added initial support for HW offloaded MPLS forwarding;
lte added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
lte added Passthrough support (CLI only);
lte added support for ZTE ME3630 E1C with additional "/port" for GPS usage;
lte automatically add "/ip dhcp-client" configuration on interface;
lte changed default values to "add-default-route=yes", "use-peer-dns=yes" and "default-route-distance=2";
ppp fixed serial port loading (introduced in v6.41rc);
sfp fixed temperature readings for various SFP modules;
snmp fixed "/system license" parameters for CHR;
wireless improved reliability on "rx-rate" selection process;
6.40.3 Stable 2017-Sep-01 (8 years ago)
Component Change
dhcpv6-server do not release address of static binding from pool after server removal;
export fixed "/system routerboard" export (introduced in 6.40.1);
export fixed export for PoE-OUT related settings;
ike1 fixed initiator ID comparison to NAT-OA;
led fixed "on" and "off" triggers when multiple LEDs are selected;
led fixed RB711UA ether1 LED (introduced in v6.38rc16);
lte do not show USB LTE modem under "/port" menu;
lte fixed ethernet flap when LTE establishes connection;
lte fixed SXT LTE graphs in QuickSet;
lte improved reliability of USB LTE modems;
poe-out fixed router reboot after "poe-out-status" changes;
rb1100ahx4 fixed HW acceleration fragmented packet decryption when fragment is smaller than 64 bytes;
rb750gr3 show warning and do not allow to use "protected-bootloader" feature if "factory-firmware" older than 3.34.4 version;
routerboard added "mode-button" support for RB750Gr3 (CLI only);
ssh do not execute command if it starts with "-" symbol;
traffic-flow fixed reboots when IPv6 address has been set as target address without active IPv6 package;
userman fixed "limitation" and "profile-limitation" update;
userman fixed CoA packet processing after changes in "/tool user-manager router" configuration;
webfig allow to open table entry even if table is not sorted by # (introduced in v6.40);
webfig allow to unset "rate-limit" for DHCP leases;
winbox added possibility to define "comment" for "/routing bgp network" entries;
winbox do not show FAN related information under "/system health" menu for devices which does not have it;
winbox do not show LCD menu for devices which does not have it;
winbox fixed ARP table update after entry changes state to incomplete;
wireless added "russia3" country settings;
wireless added New Zealand regulatory domain information for P2P links;
wireless updated China and New Zealand regulatory domain information;
www fixed unresponsive Web services (introduced in v6.40);
6.40.2 Stable 2017-Aug-08 (8 years ago)
Component Change
dhcpv6-client fixed IA evaluation order;
led fixed "modem-signal" LEDs (introduced in 6.40);
pppoe-client fixed wrong MRU detection over VLAN interfaces;
rb2011 fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
sfp fixed invalid temperature readings when ambient temperature is below 0C;
winbox added certificate settings;
winbox added support for certificate CRL list;
winbox do not show LCD menu for devices which does not have it;
winbox hide "level" and "tunnel" parameters for IPSec policy templates;
winbox hide FAN speed if it is 0RPM;